Your cart is empty.
Your cart is empty.Product Description
BDFHYK Wheel Spacers
2 inch | Thickness | 15 mm |
Jeep Lincoln | Applicable Models | Infiniti Nissan |
5x114.3mm | Wheel Bolt Pattern | 5x114.3mm |
5x114.3mm | Vehicle Bolt Pattern | 5x114.3mm |
82.5mm & 1/2x20 | Bore & Studs | 66.1mm & M12x1.25 |
| | Set of 4? | |
2 inch | Thickness | 12 mm |
Jeep Lincoln | Applicable Models | Jeep Dodge |
5x114.3mm | Wheel Bolt Pattern | 5x114.3mm |
5x114.3mm | Vehicle Bolt Pattern | 5x114.3mm |
82.5mm & 1/2x20 | Bore & Studs | 78.1mm & - |
| | Set of 4? | |
2 inch | Thickness | 1.25 inch |
Jeep Lincoln | Applicable Models | Jeep Dodge |
5x114.3mm | Wheel Bolt Pattern | 5x127mm |
5x114.3mm | Vehicle Bolt Pattern | 5x114.3mm |
82.5mm & 1/2x20 | Bore & Studs | 71.5mm & 1/2x20 |
| | Set of 4? | |
2 inch | Thickness | 1 inch |
Jeep Lincoln | Applicable Models | Infiniti Nissan |
5x114.3mm | Wheel Bolt Pattern | 5x114.3mm |
5x114.3mm | Vehicle Bolt Pattern | 5x114.3mm |
82.5mm & 1/2x20 | Bore & Studs | 66.1mm & M12x1.25 |
| | Set of 4? | |
JEFF SHIVER
2025-08-25 16:36:37
On time is advertised and the product didn't offset. My truck wheels as advertised works great. No issues
Chris Morgan
2025-08-05 13:21:05
My Setup: 2023 F150 XLT, OEM 20†Rims, 35x12.5x20These spacers worked well and were the perfect width any less and you would need to cut the studs. It will probably only work with the oem wheels since they have pockets for the studs to stick past the spacer.Only required me to trim a small piece off the plastic cowl. See pictures…
Mayra R.
2025-06-23 16:55:49
Es de buena calidad. Quedo perfecto. Y muy fácil de colocar ya que el sistema de los tornillos 🔩 es excelente. Recomendado
kevin devall
2025-05-15 13:25:06
These are not hub centric. Purchased for ford super duty. Will not work with factory wheels. Had to return due to not being as described.
Perry
2025-05-03 13:09:50
Handles better looks better
Vicente
2025-04-16 15:54:29
Ship earlier than expected
Chip Hester
2025-02-01 12:22:03
I bought these and was let down because my lug studs stuck out an 1/8" too much for the wheel to sit flush. I was able to find some shims to extend them out just another 1/4" . But needless to say it all worked out and now my wheels are offset to a sweet looking and performing position.
Boricua316
2025-01-18 17:01:26
Exactly as described. Worked out of the box.
Recommended Products