Your cart is empty.
Your cart is empty.Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Customer
2025-08-07 10:38:24
Good quality, perfect fit
Customer
2025-07-20 16:38:18
Good quality, perfect fit
Chris
2025-07-18 10:40:14
Great deal considering each one from honda is like 5 to 8 bucks.These are made in Japan and work as they should but these are not the oem ones .The rubber and metal tops are molded as one when manufactured. The rubber seems to be of the same density as oem stuff. Installed just fine ,nothing ripped when installing the valve cover blots through the gasket as one would know what I'm talking about if they have changed these on a honda.
J. Jackson
2025-07-14 18:51:15
Bought these to replace the worn out valve cover bolt seals on my 2003 Honda Accord V6. They worked great and were a perfect fit. Be sure not to overtorque them so you don't crush the rubber grommets. Torque to 9 ft.-lbs. per the factory service manual. Tip: coat them with some Sil-Glyde or other high-temp silicone lubricant, and they will seat & seal properly. Bottom line, these grommet seals appear to be very high quality and an exact fit for the OEM application. Highly recommend.
michelle lilly
2025-07-12 12:04:34
These are exactly as described and installed as I expected
Teng Cha
2025-06-09 18:31:43
Work as intended
Chris
2025-05-15 10:46:28
Great deal considering each one from honda is like 5 to 8 bucks.These are made in Japan and work as they should but these are not the oem ones .The rubber and metal tops are molded as one when manufactured. The rubber seems to be of the same density as oem stuff. Installed just fine ,nothing ripped when installing the valve cover blots through the gasket as one would know what I'm talking about if they have changed these on a honda.
J. Jackson
2025-04-29 11:00:57
Bought these to replace the worn out valve cover bolt seals on my 2003 Honda Accord V6. They worked great and were a perfect fit. Be sure not to overtorque them so you don't crush the rubber grommets. Torque to 9 ft.-lbs. per the factory service manual. Tip: coat them with some Sil-Glyde or other high-temp silicone lubricant, and they will seat & seal properly. Bottom line, these grommet seals appear to be very high quality and an exact fit for the OEM application. Highly recommend.
michelle lilly
2025-02-24 18:38:11
These are exactly as described and installed as I expected
Teng Cha
2025-01-04 19:32:17
Work as intended
Recommended Products
$23.62
$ 10 .99 $10.99