Your cart is empty.
Your cart is empty.Product Description
High Quality Transmission Round Belt
Beduan, manufacturer & distributor of top pneumatic supplies
- Over the year our goal remains the same, to enhance the pneumatic fittings.
- Our production line includes:
- Compressor Filter and Regulator
- Push to Connect Fittings
- Compressed Ferrule Fitting
- Solenoid Valve
- More tube
- Marginal product
- Search Beduan and choose what you want.
Beduan PU Transmission Round Belt
- Premium urethane round belting is ideal for your conveyor applications and most other light to medium duty applications.
- You can join the ends to create a custom belt by simply melting the tips of the material and sticking them evenly to one another until they cool.
- Easy to connect
- Easy installation
- High wear resistance
- Long service life
- plasticizer-free
- chemical resistance
Usage Methods
STEP 1
- Prepare the electric soldering iron and scissor.
STEP 2
- Heat the electric soldering iron to 302-356 °F.
- Heat the transmission Round Belt to melt.
- ATTENTION：Be careful not to burn your fingers!
STEP 3
- Butt and press both ends of the round belt.
- Wait for the end of the belt to cool.
STEP 4
- Grind the surplus part of the round belt to make it smooth.
Applicable scenarios
Used for drive transmission in packaging machine, printing machine, spinning machine, drive motor, porcelain brick etc.
Ko210
August 2, 2025
The media could not be loaded.
james kerr
July 16, 2025
I couldn't find the two 20" narrow belts I needed for a 1950s Black & Decker valve grinding machine. I purchased both the 6 & 8 mm belts. Both work, but wish they made this in 7mm. Following the directions, these are very easy to melt together and I tugged pretty hard and couldn't pull them apart. I used a soldering gun with a round flat attachment to heat both ends of the belt at the same time. Quickly, I mated both ends in a V-block which perfectly aligned the joint. Then I used a bench grinder to grind the joint flush. We shall see how long this belt lasts. If you can't find the right size belt for your application, this is a cheap fix. I would purchase again.
Housewife1028
July 6, 2025
This stuff is incredible. If you have machinery or like to tinker forget V-belts just use this. So simple to join I use a propane torch and melt both ends then hold them tightly together til it cools then that’s it you’re done. If you don’t like the size cut it and do it over.
A. James
July 3, 2025
I got lucky when I found this. I have a number of antique player-pianos and arcade machines. One of the pianos has a belt that drives the roll, and it was just getting worn out from many years of use. It is made out of thick, round leather and I was having no success looking for a replacement. The closest thing seems to be leather belt meant for Singer sewing machines, but this is a fair amount too thin. This stuff is amazing. You just cut it to length, melt both ends with a lighter and push them together until they harden. I was Leary at first that it would hold up, but it is unbelievably strong. At first, I cut it just a little too long, but it was so easy to cut about a half an inch off and reattach it. I'm sure this will be useful for other things later. It's available in different thicknesses and also either smooth or rough. The rough style seems to be perfect for this application, so it won't slip when in use.
L.Bell
June 26, 2025
So far I am pleased with this product, I used it to fabricate a belt for a 70 year old metal lathe. With all the belt manufactures making it difficult to know the actual belt length. This product makes it easier to get a machine running again, also saves time and effort just installing a belt.
BlurryEye-Blender
April 15, 2025
The surface texture of the rubber has a rough texture which supplies extra grip on the pulleys of a Singer29lk70 sewing machine. The old leather belt was worn and Burnished to much to get a grip on the pulleys w/o over torquing tension on the pulleys’s bearings. ðŸ‘ðŸ‘Had to still use the metal staple to link the ends of the belt though 👎 PIA
Vincent McElroy
March 5, 2025
Upgraded myChainstitch machine with a servo motor and this belt worked perfectly after cutting to size and welding together.
Lou from Virginia Beach
February 5, 2025
The belt material fuses beautifully using the "shaft", not the tip, an old soldering pencil. Unfortunately I believe the small pulley on the tumbler motor causes a bend that exceeds the minimum diameter recommended & the belt breaks after a few dozen hours of use. The heat of the motor, which normally runs hot to the touch, adds to quickly further weakening.
Jagannath Rout
December 30, 2024
Good product but little bit costly
chidambara bhat
December 21, 2024
very good product thanku
Recommended Products
$37.98
$ 16 .99 $16.99