Your cart is empty.
Your cart is empty.Dropping your ride height does more than just electrify your handling, cornering and braking. It completely transforms how far your suspension can travel up and down. Protecting your low rider from bottoming out takes the added padding of a Belltech Bump Stop Kit.
Craig
2025-09-06 10:41:54
Bought these several years ago to provide overload support for the leaf springs on my truck. Since I had installed 5k air bags, I also used the jounces from the axle for the rear upper overload. They rapidly deteriorated, but these are still going strong.
Bob bobik
2025-08-25 14:35:04
These bump stops fit perfectly right out of the box. No trimming necessary to fit in the stock bump stop location. My truck has a 1.25 inch leveling kit, and these longer-than-stock bump stops just fill the gap between the bump stop and control arm, protecting my pricey DSSV shocks from bottoming out. I,m running these full length (I've seen others on u tube shorten theirs) and the ride is as comfy as stock on road and suspension flex seems undiminished off road. These are noticeably softer than the stock "button" style bump stops.
Bob
2025-08-02 14:21:49
Wish these were like stock so they could just thread into the stock location without needing access to both sides of the bolt. Had to remove shock to lower LCA, to tighten the bolt. They work, just a pain to install for no reason.
michael lee
2025-07-08 10:06:55
I cranked my torsion bars up on my 2500hd. The factory jounces were no longer making contact with the lower control arm. These are longer than the factory jounces and helped make the ride feel more natural. Easy install direct fit for the front jounces on a 2018 2500hd.
bear
2025-05-24 11:54:34
Very easy install. The foam is kind of cheap but it does what it needs too
mtshastaca
2025-05-13 14:37:11
Bigger center hole than pictured. Softer than original but OK i guess. 2001 Astro Van. Maybe 3/16 shorter than original.
Steve T.
2025-04-25 18:02:46
Perfect fit on my 2018 Chevy Colorado ZR2 after installing my 1.25 inch leveling kit. I did not cut them down and have not noticed any difference in the way the truck drives.
Osvaldo Solano
2025-03-21 10:28:59
Se ajusta perfecto a una silverado 2008
Greg
2025-03-16 11:25:51
Easy to install , fit perfectly
Dawson Deveny
2025-02-20 16:02:13
I needed the tapered bump stops to clear the corner of a six inch lift that was ruining the factory ones. These worked great, they are very soft though so better for lighter trucks.Easy to trim between the ridges if they are too long.
Customer
2025-02-18 15:49:09
Work well on the colorado zr2
Rodney
2025-01-25 18:42:16
Worked perfect for my Zr2 application, had to remove first small section, took like 2 minutes would recommend.
Theresa H.
2024-12-29 10:33:07
Exact fit for my 2016 GMC Sierra pick-up. One fifth the price of the GMC dealership .
Recommended Products
$32.28
$ 15 .99 $15.99