Your cart is empty.
Your cart is empty.Fiber Disc Backing Pads are made with high quality plastic and feature spiral raised ribs for cooling while in use. Each Resin Fiber Disc backing pad also features air holes to provide additional cooling to further extend the life of each fiber disc. The rigid plastic backing pad are lighter than the rubber alternative and can be used at higher RPM. Each backing plate includes a lock nut.
Melody
2025-08-22 20:04:38
Works well with my 71/2 inch grinder for sanding. I used it for my benches to remove old wood and lacquer from the benches. Worked great.
Butch
2025-08-05 15:38:15
Been using it on an angle grinder with fiber resin sanding pads for 6 hours a day the past 3 weeks sanding down a log cabin with no issues. I also purchased a competitors two pack that was less expensive and when it arrived I immediately noticed the poor quality and it would not even fit properly on my angle grinder. Absolutely no issues with this one and I highly recommend it.
Robert McClelland
2025-08-03 14:46:53
I liked the product, worked great until I dropped it, and broke the plastic backer.....
michael r.
2025-07-19 21:15:38
Good price, excellent product
Customer
2025-07-15 12:43:56
Was intact in box. Have not used yet. People have complained about breakage after dropping. Common sense will tell you that dropping a hard, rigid plastic piece, attached to a heavy tool, onto a hard surface, will break it. I have used these for years and the one thing you cannot do is drop them onto a hard surface.
SMW
2025-07-14 18:04:40
Update: The second pad broke too, in line with the first pad experience but this time there was no drop involved. This is a very unfortunate production.In my 28 years of working with fiber discs and backing pads of it I never experienced the falling apart of a plastic fiber disc backing pad. I usually have to replace them because the plastic gets trimmed over the years by the heat of fillet grinding or if it gets shaved of by a metal edge.This happened immediately after the grinder falling three feet to the ground. That this could shatter in pieces is an engineering failure. Engineering such as in the wrong plastic alloy used to produce this backing pad.As I said I use this for more then a quarter century and never had a disc backing pad fall apart. I accidentally dropped angle grinders at this height hundreds of times.Imagine the sharp edges of this plastic hits someone in the face that is standing a few feet away?If I'd be the seller of this product I would think about a recall on this item.
Onesimo Cuellar
2025-07-08 11:33:42
Item arrived on time and in good condition
Jrlyrnyrdskynyrd
2025-06-25 09:39:34
Grinds
Great design poor quality.
2025-06-03 10:11:19
Used this with my coarse grit sanding disks worked perfect. Fit exactly as designed.
Victor
2025-05-30 18:32:03
good stuff. it's exactly for my tool!
Hpp- Canada
2025-05-07 16:59:55
Working on welding side jobs this product makes grinding more easy..
Myles
2025-03-24 13:57:19
Don’t waste your money
Cody
2025-02-09 13:05:18
Works great fits my grinder perfect.
Recommended Products
