Your cart is empty.
Your cart is empty.Big Horn 19521 Sanding Drum Set lets your drill press do double duty as a spindle sander. You'll be ready for virtually every job with this quality set of drums and sleeves. Includes five expanding drums in sizes 1-1/2" by 2-1/2", 1" by 2-1/2", 3/4" by 2-1/2" and 1/2" by 2-1/2" . Also includes two sets of sleeves (two fine sets and two coarse sets). These drums will also work in hand drills for freehand sanding use. A selection of four popular size rubber sanding drums complete with two 120 and 80 grit abrasive sleeves for each drum.
Vitaly
2025-09-01 11:46:27
This is certainly a good product. I only used a 1" drum so far, but see no reason why other sizes should be not as good.Drum expands evenly, so the cut is of even diameter across the whole length. It may not be obvious what sandpaper rolls are of what grit - they are labeled on the inside, open plastic wrap to find out.You need to mind actual cut sizes you end up with: dimensions given on packaging are for the drums, sandpaper roll adds about 1/8" in diameter, and wobble of an extension shaft the chuck is sitting on may add even more space. I had to use a chuck with a hex shank and an extension, driven by an impact driver because a drill was too wide to get where I wanted, and this definitely contributed to a wider than desired cut. Here is a product improvement suggestion to Big Horn: make shanks of the drums at least an inch longer, that will help maneuver drums if chuck/drill size is an obstacle.
Rachel A. Kacsur
2025-07-20 15:12:51
THEY WORK WELL AND ARE A GOOD VALUE FOR THE PRICE
Aaron I
2025-07-05 19:34:34
I paid $18 for this.This kit is fantastic if you don't have a spindle sander. Put it on your drill press, set it to a high RPM, move the table to the side, and go to town. Especially the larger drums are remarkably effective.Keep in mind that this is $18 for about 5 drums and a bunch of sanding sleeves. The quality is very good for that price point. This is obviously not the same as an oscillating spindle sander that costs hundreds of dollars. If you want that, the Ridgid EB4424 is the "industry standard" for a decent amateur-grade spindle sander. If that's not good enough, Laguna makes some nice professional-grade spindle sanders, but I doubt you'd be looking at this kit if you were in that market :-)The only downside of this kit is that the arbor of the smallest drum is very thin, and it's pretty easy to snap it if you push against it too hard.The kit is cheaper than a set of replacement sanding sleeves, so I just buy a whole new kit when the old one is worn out.
Assaf
2025-06-18 17:43:37
It works phenomenal. I can't afford a spindle sander right now and this is a great replacement. Funny thing, I ordered this in 2019 and except for assembly hadn't actually used it until today end of 2023. Was super glad to see it sanding a contour on a piece of melamine in a brilliant way. I'm ordering another.
RGK Mr. Tyre
2025-05-19 10:33:46
I 1st tried the largest adaptor but couldn't get it too tight, so after 3 tries it seemed as tight as possible i said we'll go slow. As soon as i pushed my wood against the 1500 rpm spinning drill press the drum came loose and pinched my board against the fence damaging the drum sander. I had to switch to the 1" size and it worked fine, but now i'm stuck with a BENT sanding drum and no way to ask for a replacement part. I'll attempt to send it back if I don't hear from anybody in 7 days. See pic
John Doe
2025-05-14 10:10:40
What I really need is a spindle sander, but not willing to buy one for occasional use. Instead I bought this inexpensive set, chucked up the appropriate size into my drill press, and finished off a guitar body with nice crisp lines and angles. It would be nice if they gave a lighter grit abrasive as well.
Ken Woods
2025-04-02 15:27:23
Don't be put off by the headline too much, I'll be as honest as I can. I just received this today, and thought I'd try it's weakest link, the 1/2" spindle. Like Dave said, back in Aug of 2019, the 1/2" spindle's shaft bent as soon as rotation was put to it. But this is only one of four, although I really could have used this one...The rest of them have a much larger shaft to them, so I really don't foresee these bending the same way. The problem with the 1/2" could have been solved by using a larger screw for the shaft, which is something I may end up doing, drilling out the spindle rubber and using a bigger screw.Damn, bet you guys over at Big Horn wish you had me on your development crew!!Anyway, if you don't have a great need for a 1/2" spindle, or if you don't minf goiung through tthe effort, good set, but knowing what I know now.... I wouldn't buy this again, nor will I buy anything from ToolOrbit again.The beginning of this is observation, the last paragraph was my review, my comment about not buying from ToolOrbit again... was my truth.
David C. Elliott
2025-03-25 14:01:26
This is exactly what I needed for a small project. I don't have the space for a dedicated sander, but I do have a drill press. I was able to get it set up and working in just a couple of minutes. After reading some of the reviews here, I checked the sleeves on all of the mandrels and all of them fit and tightened fine.The one negative I found was that the hole in my drill press plate is not big enough for the drums to fit down in. I used a block of wood to rest my work piece on. I am planning to take a block of wood and drill a large hole in the center for the largest drum to fit and bolt that to the drill press plate so I can lower the drum just below the sanding surface.
MR B PRANGELL
2025-03-23 12:39:32
Good quality excellent
Ian Thomason
2025-03-17 14:27:50
Very handy product and good quality. Performed well and saved me time. The only issue is I cannot find where to buy more sanding tubes of that length.
Enrique S
2025-02-27 18:58:22
Excelente producto
Hamilton Gomes Pereira
2025-02-09 18:02:07
Qualidade muito boa!!
Chia Leong Wee
2024-12-19 13:19:38
Do not buy. It vibrate alot and the smallest size bit will bend very easily. It’s dangerous.
Recommended Products
$15.99
$ 6 .99 $6.99
$1,085.00
$ 99 .00 $99.00