Your cart is empty.
Your cart is empty.Product Description
MULTI PURPOSEbicycle parking stand/repair stand
- MULTI PURPOSE - Bike Repair Stand & Bike Parking stand & Bike Vertical Support Display stand.
- STURDY - MAX LOAD:55 lbs(25kg).It can easily withstand the most bikes.
- STABILITY - Four legs supports for more stability.
- QUICK & EASY ADJUSTMENTS
SOFT PAD AVOID SCRATCH
The hook is wrapped in ABS soft pad,which does not damage the bicycle frame.
THICKENED RUBBER DESIGN
Non-slip rubber base increases friction and makes parking more stable.
Easy Storage
Easy Storage
Installation tools
Jonathan Stein
2025-09-06 16:49:42
a
KW
2025-08-02 14:19:35
Could have had 5 stars... All it needs is a series of holes instead of the long slot to position the hangers. But it does work, sorta! It will hold two of my three bikes very steady.... It will work on all of them once I disassemble it and drill the necessary holes so the hangers will line up with the chain stay.
Shlomi Nahum
2025-08-01 10:46:06
a nice product but when mounting a EBike on it, it's startin to bend a little and its hard to stable the bike but its possiable to do it
Bruce Ambrose
2025-07-18 17:16:25
The media could not be loaded.
QUALITY WINS
2025-07-17 16:27:17
THE COUPLING OF TWO PARTS THAT SUPPORT THE TRYKE, IS NOT PROPERLY FITTED. THE COUPLING OF TWO VERTICAL PARTS WOBBLES, DUE TO A BAD FIT OF THE TWO VERTICAL COMPONENTS; WOBBLING WILL ADVANCE A PREMATUREFAILURE OF THIS UNIT. THE UNIT IS USED ON A TRYKE, TO RAISE IT OFF THE FLOOR AND TO ALLOW SPINNING OF THE WHEELS TO ADJUST THE BRAKE CALIPERS
Andrew Singleton
2025-07-04 18:36:33
Holds my big box bike steady in spite of what feels like a wider frame tubing than typical. Assembled easy enough with the included tools, though I will note the screw that holds the two pieces of the upright together did not thread in completely. Pedals turn freely which is the entire point of the stand.The feet are not rubber they are plastic, but fortunately the hooks making contact with the bike are sprayed with a rubberized coating to prevent paint chips and scratches. Nowhere near as good as a full sized stand in my opinion, but it gets the job done on the cheap when space is at a premium.
Chicago Matt
2025-06-25 13:31:54
I recently snagged this Bike Repair Stand, and let me just say, it's been a total game-changer for my biking routine First off, the sturdiness is no joke. With its carbon steel construction, this stand can easily handle my mountain bike without breaking a sweat. And the four-leg support? Rock solid stability right there.What's super cool is how versatile this stand is. Whether I need to fix something up, park my bike indoors, or just want to display my ride, this stand does it all. It's basically the Swiss Army knife of bike standsAdjusting the height is a breeze too. A quick twist and slide, and I can get it to the perfect level for whatever task I'm tackling. Plus, the tightening nut locks everything securely in place.I'm always nervous about scratching my bike, but the soft pad on the hook totally puts my mind at ease. It cradles the frame gently without leaving a mark. And the thickened rubber base? No slips or slides, just steady and stable parking.Setting it up was a piece of cake – I was up and running in about 5 minutes, which is a huge plus in my book. And knowing there's a professional customer service team ready to help out if I need it? That's the cherry on top.All in all, this Bike Repair Stand is a must-have for any cyclist looking to make maintenance and storage a whole lot easier. Thumbs up from me ðŸ‘🚴â€â™‚ï¸
Kurt Pollard
2025-06-21 17:25:20
Would not hold bike and my bike is very light and it kept falling over
Jonathan Stein
2025-05-20 16:04:51
a
KW
2025-05-19 10:39:23
Could have had 5 stars... All it needs is a series of holes instead of the long slot to position the hangers. But it does work, sorta! It will hold two of my three bikes very steady.... It will work on all of them once I disassemble it and drill the necessary holes so the hangers will line up with the chain stay.
Shlomi Nahum
2025-04-03 18:59:18
a nice product but when mounting a EBike on it, it's startin to bend a little and its hard to stable the bike but its possiable to do it
Bruce Ambrose
2025-04-02 10:58:09
The media could not be loaded.
QUALITY WINS
2025-03-28 20:23:22
THE COUPLING OF TWO PARTS THAT SUPPORT THE TRYKE, IS NOT PROPERLY FITTED. THE COUPLING OF TWO VERTICAL PARTS WOBBLES, DUE TO A BAD FIT OF THE TWO VERTICAL COMPONENTS; WOBBLING WILL ADVANCE A PREMATUREFAILURE OF THIS UNIT. THE UNIT IS USED ON A TRYKE, TO RAISE IT OFF THE FLOOR AND TO ALLOW SPINNING OF THE WHEELS TO ADJUST THE BRAKE CALIPERS
Andrew Singleton
2025-03-05 17:20:33
Holds my big box bike steady in spite of what feels like a wider frame tubing than typical. Assembled easy enough with the included tools, though I will note the screw that holds the two pieces of the upright together did not thread in completely. Pedals turn freely which is the entire point of the stand.The feet are not rubber they are plastic, but fortunately the hooks making contact with the bike are sprayed with a rubberized coating to prevent paint chips and scratches. Nowhere near as good as a full sized stand in my opinion, but it gets the job done on the cheap when space is at a premium.
Chicago Matt
2025-02-13 19:07:41
I recently snagged this Bike Repair Stand, and let me just say, it's been a total game-changer for my biking routine First off, the sturdiness is no joke. With its carbon steel construction, this stand can easily handle my mountain bike without breaking a sweat. And the four-leg support? Rock solid stability right there.What's super cool is how versatile this stand is. Whether I need to fix something up, park my bike indoors, or just want to display my ride, this stand does it all. It's basically the Swiss Army knife of bike standsAdjusting the height is a breeze too. A quick twist and slide, and I can get it to the perfect level for whatever task I'm tackling. Plus, the tightening nut locks everything securely in place.I'm always nervous about scratching my bike, but the soft pad on the hook totally puts my mind at ease. It cradles the frame gently without leaving a mark. And the thickened rubber base? No slips or slides, just steady and stable parking.Setting it up was a piece of cake – I was up and running in about 5 minutes, which is a huge plus in my book. And knowing there's a professional customer service team ready to help out if I need it? That's the cherry on top.All in all, this Bike Repair Stand is a must-have for any cyclist looking to make maintenance and storage a whole lot easier. Thumbs up from me ðŸ‘🚴â€â™‚ï¸
Kurt Pollard
2025-01-17 15:03:45
Would not hold bike and my bike is very light and it kept falling over
Recommended Products