Your cart is empty.
Your cart is empty.Product Description
The best binoculars tripod adapter
- Staoptics binocular tripod adapter is in aluminum, sturdy and durable, easy to carry,quick connect or disconnect.It's a great spare part as it can fit all binoculars with its unique design.
- This tripod adapter come with standard 1/4-20Inch Threading, which can install your Porro or Roof binoculars to your tripod or the car window holder,let it become more stability and convenient.
Strong and Durable & Strong applicability
- Adopt the strong and light alumunum material, Machined and grinded, the weight is only 1.75oz.
- Stable without shaking.
- Size:88x30x20mm,Easy to carry.
- The top connection screw is only 1.063 inch, which is safe and won't poke your chest.
- Suitable for all binoculars that can be mounted on a tripod.
- 8x32 8x40 8x42 10x50 15x60 15x70 20x60 20x80 Binoculars etc.
Quick Detachable
- Rotating top nut can be quickly disconnected or connected
Easy to install
- 2 parts in total
- Installation completed in 1 minute
Adapt tripod
- Can be mounted on any tripod with 1/4-inch x 20 standard thread
Walleye Dude
2025-09-03 15:39:12
Fit my Steiner binoculars well, but threads were a touch too long and would continue to loosen up. Had a package of old rubber washers that fit the bill. Drilled out the center to fit the stud and trimmed the outside down to size. Works great! No more loosening up on its own and saved a ton of money over a named brand unit. Solid as a rock! I highly recommend this quick attach mount system for your optics. Can’t wait to use this setup on my upcoming Montana Elk hunt.
Tom
2025-08-21 16:38:07
These worked great for holding the BIG binoculars I bought off of Temu (sorry Amazon), and kept them quite stable and mounted onto the tripod.
Armatis Reviews
2025-06-28 18:17:05
This is a great bino adapter for a tripod. I used it with my Vortex Diamondback 10x42s and I use it with my upgraded Maven B.6 12x50 binos. It works great. I used the Vortex brand adapter before and I hated it because trying to screw it into the binos between the objective lenses were a pain. I really like this adapter because the piece that goes into the bino goes in once and I just leave it there. Then I can slide that piece into the tripod adapter quickly.The one "con" I have found with this adapter is that even when the top screw is tightened all the way to lock the bino piece into the tripod adapter, the binos will still easily wiggle horizontally. I kind of like this because it allows me to level out my binos easily if the tripod isn't perfectly level.. However it's a little TOO loose and I'd like to be able to see it be a little more snug so I can adjust the level but not have it floppy around with every little movement.Overall for the cost, a great tripod adapter mount. I bought one for my dad as well and he really likes it.
Isaac Schultz
2025-06-21 13:15:52
I did not realize it came with two screws to put on different binos. You can set up two different pairs of binos with this one purchase, use a smaller zoom to scan around, and when you see something of interest, lock the tripod down and switch pairs to not lose your spot... I love it and it seems to fit most binoculars. Has a quick detach for easy switching and is of a lightweight but solid construction. It's a good buy if you are trying to get really steady views with binoculars.
Tim
2025-06-15 11:44:46
I'm glad I bought this as a backup for the more expensive Bushnell mount. It fit well and served its purpose. The design of these quick release mounts on most of these is just not going to give you a solid connection to the tripod but if you can live with a bit of wobble you can save a bunch of money. The leverage of the binoculars is just too great for the little screw to hold it from teetering sideways if there is much pressure. It will hold still when you are careful.Some sellers don't sell the studs separately in case you have another set of binoculars, you have to buy another complete unit. This package includes an an extra stud.The quality of the mount is good. There is a deep enough screw slot on the end of the stud to get it tight.Iwould recommend this for a budget mount or a backup. Having this is way better than trying to hold the phone up to the binoculars by hand!
Tashinamu8
2025-05-24 17:15:56
I finally opened this up to attached to my Celestron 7x42 binoculars purchased through Amazon a few years back. It made the connection between my binoculars and my Nikon camera tripod to view a comet (Taushenchien-ATLAS) that will not be visible for another 80,000 years.I found this connector to be lacking in dependable stability. It just wouldn't tighten down strong enough that it would allow the binoculars to shift on the axis if the connector if even slightly bumped. Once I figur we d out its quirks, I adjusted my behavior to meet the needs of the product. This is just plain wrong. Nevertheless I saw this beautiful comet and its glowing tail for seven glorious nights - three more to go. I watched "ATLAS" shift her position every night and fade into darkness at the end of 40-minutes each night.I think I will replace the binoculars with a higher powered monocular. Amazon has some good deals going on right now and hopefully they will come with their own connector to a tripod.
joseph alan grooters
2025-03-09 10:02:50
Works great for me. Seems solidly built, easy to use, has an extra screw in stud with a set screw and i just leave it on my binoculars. I would definitely buy this again.
julie
2025-02-26 14:43:30
Great product for the price, but didn’t fit vortex binoculars no trouble return
Pascal
2025-02-24 16:40:59
Super sturdy. Worth every penny! Thank you for awesome product!
Adrian
2025-02-22 16:16:36
its a bit wide at the top part.quick detach is perfectquality made
Kili
2025-02-17 15:32:12
It’s cheap but strong relative other branded adaptors. easy to screw, mount and dismount. I think it will last a long time.
Shawn Muir
2025-02-01 10:46:34
As ordered
Darren Hennig
2025-01-30 11:30:29
I like the stalk a lot, but the posts that go into it are made of very cheap aluminum, not even steel! Makes the unit a bit "unfinished" in a way - it is a decent mount, but I did find it to clock in a bit lower than level when clamped.For a budget roof binocular mount, adequate - sturdy and easy to use. But with a bit more "finish", this could have been a superb mount.
Recommended Products
$23.98
$ 11 .99 $11.99