Your cart is empty.
Your cart is empty.These Deburring Blades come without handle, only deburring blades, suitable for deburring metal, plastic, wood. Offers easy, effortless deburring through multiple blades. It is easy for you to operate.
Jennifer
2025-08-29 16:18:23
Fast Delivery Great Quality Product. Works great. Easy to use.
Tony C
2025-05-18 16:13:31
Running some PVC conduit and this does a good job of cleaning up the rough edges from the saw so I don't contaminate the glueSnapped into my existing deburring tool and spins quite easily.Very good item
Empiror22
2025-05-02 14:14:43
Great overall, only real downside to these are the price. You can get a new handle (tool) and 6 blades for about the same price. Why not have a better price for these 10 pieces or include a new handle.Pros:works wellfits my handle/tool (different brand)seems to stay sharp for a while, especially when I deburr aluminum (soft vs steel)seems well on steel (grade dependent)Cons:better prices out thereThanks,brocktech
Saundra Reed
2025-03-18 17:40:16
I disliked because the brand new blades were dull. I need sharp blades for my job.
C.S.
2025-02-04 10:21:38
I really like these deburring blades, they are slightly smaller tip than the previous ones I was using and that allows me better access to tight areas and holes. So far I have used them on mild steel and aluminum, and they work just as I would expect...they pull up a small continuous curl of metal that I can vary depending on how much pressure I put on the blade.The blades are all very uniform and sharp, I didn't have to put much force at all onto the blade in order for it to bite nicely and start taking the sharp corner off a piece of aluminum. The blade pulls cleanly and takes off a continuous curl of metal, no skipping or anything else...just a nice deburred edge and a small curl of metal left behind!I would definitely buy these again, the narrow tip is a feature I don't see on many other blades and I think it will be very useful. I hate having to go back into tight areas or holes and use a different tool like a countersink bit or file to touch up the edges because some other deburring blades are too hard to get in the space. These blades might get rid of some of that problem for me!
Prosumer
2025-01-25 18:31:00
These are good replacements used on a Noga deburring tool. The fit is perfect and the grip is tight. The deburring blade is sharp but has a much thinner blade than the Noga OEM blades. That makes deburring very smooth but deeper in the cut. I use these on 3D printed parts and I get a lot done with these blades; a bit too much at times. So I had to do less passes with these to keep the parts intact. I've had a few deeper deburr passes to the point that I chamferred too much out of the sharp edges and end up trashing the part. So if you're looking for something in other harder materials to work with, this set my be good. But as for my plastic deburring, this set of blades is definitely an overkill.
Amanda Kelley
2025-01-23 11:40:08
Awesome replacements
William Wallace
2025-01-17 18:04:55
Work fine but was hoping to get the smaller radius type blades.
Recommended Products
