Your cart is empty.
Your cart is empty.Bob
2025-09-04 12:07:17
This is really nice wire. Its very soft and easy to work with. Im really glad I used it on my project.
JonL
2025-08-29 17:27:24
This wire worked great for 24v LED lights. It fit the connectors that easily allowed me to get my cob LED lights in use. The jacket on these is flexible and can allow for separation of the conductors. There is a little work required to separate them without tearing the jacket in the middle, but I was able to figure it out without wasting too much wire. The conductors seem to be working well in my installation requirements.
Ice-wallow-com
2025-08-24 16:01:52
Def 25ft used to wire a set of lights onto my car and very good quality and durability
tgtech
2025-08-23 10:15:21
This wire is OK. The days of reasonably priced pure copper wire are over. This is a decent substitute. It does seem "thin" for 20 gauge, but it is OK. Takes soldering fine. The insulation seems very flexible.
Peter D. Pruyne
2025-08-18 17:12:41
Didn't quite understand the difference, glad I got this.It is very flexible wire. It doesn't "take a set" when you bend it. That is good for my uses.Ordinary wire is PVC insulated, stiffer, less flexible. Silicone better.
Gale Smith
2025-08-08 13:12:45
I use this for extension cables for ham radio and portable solar charging. It's easy to work with, supple and great for winding up and storing without developing a memory. This is my second purchase, and I will buy more in the future if needed.
Keri7240
2025-08-04 14:41:25
The BNTECHGO 14ga / 2.5mm² dual conductor red and black wire has thick soft silicone insulation and wire composed of very many extremely fine threads, rendering it extremely flexible. I found it to be a good choice for heated bed wiring on a 3D printer which must pass 12 amps of current in a hot environment while constantly moving back and forth.... sometimes for several hours.This wire is capable of handling the heat, constant flexing and current for hours on end but is only as good as the terminations and strain reliefs. As the original wiring this replaced failed at a crimp connector made with a plain crimp of shallow depth in a tubular insulated connector, I recommend die-crimped "open barrel" wiring eyelets with an extended crimp zone rather than generic crimping of 1-2mm depth in a standard tubular eyelet.Fortunately, Amazon sells a suitable crimper, the IWISS 1424A Although this wire solders well, I don't recommend soldering for high current loads as it adds electrical resistance. and causes relative brittleness at the solder joint.
jemorti
2025-08-03 11:18:07
I like this wire for connecting my radio equipment to the power supply.
I. N. Cognito
2025-07-31 16:43:17
very fine stranded wire, tin-coated for corrosion protection, solders like a charm (considering the very find multi-strand wire) and with very rugged silicon insulator. It is also highly flexible at all temperatures.I LOVE this brand / serie of wire.
LOBO GLORIOSO
2025-07-19 15:39:31
DeberÃan de mostrar el tamaño real que tiene este objeto como medidas y peso ya que uno piensa que es una extensión grande para la luz y cuando lo traen te das cuenta que es una mino cosita lo cual no es lo que esperaba o por lo menos ser más descriptivos en los detalles o poner una imagen de referencia comparado con una mano por ejemplo o alguna otra cosa
Grady
2025-07-09 18:28:55
Reasonably priced for silicone wire. Strips, tins and solders easily. I'd buy this again..
Olivier D.
2025-05-01 18:07:05
câble silicone double AWG14 multibrins : 400 brins très fins.câble double rouge+noir collés, facilement séparables si besoinPas ultra souple, mais quand même très souple vu le nombre de brin
Customer
2025-03-29 18:33:33
Good wire and nicely packaged. Fast delivery.
Bob
2025-03-24 18:05:36
This is really nice wire. Its very soft and easy to work with. Im really glad I used it on my project.
JonL
2025-03-23 15:58:16
This wire worked great for 24v LED lights. It fit the connectors that easily allowed me to get my cob LED lights in use. The jacket on these is flexible and can allow for separation of the conductors. There is a little work required to separate them without tearing the jacket in the middle, but I was able to figure it out without wasting too much wire. The conductors seem to be working well in my installation requirements.
Ice-wallow-com
2025-03-07 18:10:43
Def 25ft used to wire a set of lights onto my car and very good quality and durability
tgtech
2025-03-06 11:13:46
This wire is OK. The days of reasonably priced pure copper wire are over. This is a decent substitute. It does seem "thin" for 20 gauge, but it is OK. Takes soldering fine. The insulation seems very flexible.
Peter D. Pruyne
2025-03-02 17:39:15
Didn't quite understand the difference, glad I got this.It is very flexible wire. It doesn't "take a set" when you bend it. That is good for my uses.Ordinary wire is PVC insulated, stiffer, less flexible. Silicone better.
Gale Smith
2025-02-21 11:11:08
I use this for extension cables for ham radio and portable solar charging. It's easy to work with, supple and great for winding up and storing without developing a memory. This is my second purchase, and I will buy more in the future if needed.
Keri7240
2025-02-11 14:01:37
The BNTECHGO 14ga / 2.5mm² dual conductor red and black wire has thick soft silicone insulation and wire composed of very many extremely fine threads, rendering it extremely flexible. I found it to be a good choice for heated bed wiring on a 3D printer which must pass 12 amps of current in a hot environment while constantly moving back and forth.... sometimes for several hours.This wire is capable of handling the heat, constant flexing and current for hours on end but is only as good as the terminations and strain reliefs. As the original wiring this replaced failed at a crimp connector made with a plain crimp of shallow depth in a tubular insulated connector, I recommend die-crimped "open barrel" wiring eyelets with an extended crimp zone rather than generic crimping of 1-2mm depth in a standard tubular eyelet.Fortunately, Amazon sells a suitable crimper, the IWISS 1424A Although this wire solders well, I don't recommend soldering for high current loads as it adds electrical resistance. and causes relative brittleness at the solder joint.
jemorti
2025-01-20 13:41:40
I like this wire for connecting my radio equipment to the power supply.
I. N. Cognito
2025-01-01 19:49:44
very fine stranded wire, tin-coated for corrosion protection, solders like a charm (considering the very find multi-strand wire) and with very rugged silicon insulator. It is also highly flexible at all temperatures.I LOVE this brand / serie of wire.
LOBO GLORIOSO
2024-12-30 16:49:15
DeberÃan de mostrar el tamaño real que tiene este objeto como medidas y peso ya que uno piensa que es una extensión grande para la luz y cuando lo traen te das cuenta que es una mino cosita lo cual no es lo que esperaba o por lo menos ser más descriptivos en los detalles o poner una imagen de referencia comparado con una mano por ejemplo o alguna otra cosa
Grady
2024-12-28 19:54:52
Reasonably priced for silicone wire. Strips, tins and solders easily. I'd buy this again..
Olivier D.
2024-12-25 18:22:50
câble silicone double AWG14 multibrins : 400 brins très fins.câble double rouge+noir collés, facilement séparables si besoinPas ultra souple, mais quand même très souple vu le nombre de brin
Customer
2024-11-28 17:28:47
Good wire and nicely packaged. Fast delivery.
Recommended Products