Your cart is empty.
Your cart is empty.Product Description
Blue Heat Tape High Temperature Heat Resistant Tape
The heat resistant sublimation tape is really indispensable when sublimating, and the tape can do the job very well. Applicable to Circuit components, ovens.
These heat press tapes are made of polyester film tapes, with a high temperature resistant adhesive ability, can perform better in assisting.
The heat tape for heat press is not only suitable for sublimation on coffee cups, but also suitable for heat transfer vinyl on T-shirts, pillows, clothing, fabrics, and also can be applied for most kinds of DIY projects.
Highest Temperature Up To 500 ℉ (260℃), Long-Term Temperature: 428 ℉ (220℃) & Short-Term Temperature: 500 ℉ (260℃), Being Able For Cricut Heat Press Used Accessories And Supplies, Perfect For Sublimation Supplies For Beginners.
Widely Used
This blue heat sublimation tape for heat press is not just essential for sublimation. It's also excellent for masking parts during powder coating, painting, anodizing, plating, heat sublimation press vinyl, and baking, painting fixing of electronic parts during processing.
Shear a paper tape in appropriate size and stick it on the back of the resin frame, pour the resin glue into the frame and bake them under UV light, then peel off the tape after they dry.
Use them to make beautiful gifts for relatives and friends, expressing your best wishes with these elaborate surprises.
Self-adhesive with moderate viscosity, easy to stick or remove, No curling, shrinking, and lifted edges for a sharp paint line every time.
Product Features
Powder Coating Masking
High temperature polyester masking tape are ideal for powder coating masking application. It is coated with high temperature silicone adhesive. Aggressive adhesive with clean removal capability.
Polyester Tape Usage
Polyester tape is thin, conformable, tough, highly tear resistant. Recommended for insulating connections, crossover insulation and barrier insulation on small bobbin wound coils; and for holding layer and barrier insulation on stick wound coils.
Heat resistance & Clean removal
Material: Polyimide PET(Polyethylene terephthalate)
Adhesion type: Silicone
Excellent heat & solvent resistance, minimal shrinkage after baking and clean removal.
High Temperature, Clean Removal, No Residue PET Tape
Polyester tape exhibits excellent conformability and high dielectric strength per mil of thickness. Designed to perform in difficult masking operations such as the masking of surfaces during application of durable powder coating.
High insulation, high temperature and low electrolysis, good mechanical properties, anti-friction, special adhesive treatment, strong adhesion.
Used for spraying, gold plating, electroplating, aluminum anodizing, circuit boards, etc. The shielding process is required for sealing, high temperature and acid and alkali in the production process.Used for plating and soldering PCB boards.
Heat-resistant tape can be well attached to the surfaces of electronic products, motors, solder, as well as painting, packaging fixation, and printed boards. After peeling, there will be no residue left. Even uneven surfaces can be easily wrapped with these heat-resistant tapes.
3D PRINTERS AND PRINTING PET Tape with Silicone Adhesive
Heat transfer tape is mainly blue when it is not torn off and transparent blue when it is torn off .
Our heat press tapes for sublimation have nice resistance and functions, which will not leave residue after peeling off. Even uneven surfaces can be easily wrapped with these heat resistant tapes.
Size: Width 3 inch (75 mm) and Length 108 ft (33 m ), total 1 roll
Adhesion: 9.5N/25MM
Tensile strength: 160N/25MM
Withstand voltage: 6.5KV
Temperature : Removes cleanly at bake temperatures up to 260°C.
NSFab
2025-08-26 16:27:30
Doing some experiments that require measuring local temperatures on a solar panel with a thermocouple. Tried using some strong masking tapes for this task, but they could not withstand the 250 degree temperatures. This tape seems to hold up exceptionally well. Even an observation here is that the tape actually holds better at higher temps than it does lower temps.
BJ
2025-08-02 12:22:39
On the bench today, I’ve got some BOMEI PACK Wide Blue Heat Transfer Tape, 150mm × 33m (108ft) Heat Tape High Temperature Resistant Tape for Tumbler Sublimation Print,Heat Transfer Tape, Heat Vinyl Press Tape, No Residue.It’s wide, translucent, heat resistant tape. Plenty sticky without leaving the stickiness behind upon removal.It is what it claimed to be so I can’t fault it.
Alpha Coyote
2025-07-08 11:26:50
Using this for paint masking. The adhesive is a little stronger than I'd prefer for this application, but it would probably be great if you don't plan to remove the film.
artist4him
2025-07-03 17:53:44
Ordered to use as a cost effective (but maybe overkill) version of transfer tape for daughter's Cricut machine. She was pretty excited about it and is confident that it will work well to help transfer complicated designs.
D. Houston
2025-06-12 10:24:21
I love this stuff and wish I'd found it sooner. I like to rotate the surface of my printer with blue tape and the 'naked' PEI, it seems to work for adhesion, but that could be entirely anecdotal. One way or another, this is a third texture to add in to the rotation. Also, the 150mm width means that I can cover my Elegoo Neptune 4 Max (430mm x 430mm) in 3 passes, which is so much easier than the 10-12 pieces of blue tape. Doesn't curl, bubble, or warp, I would certainly recommend it.
Jason K.W
2025-02-24 09:37:58
I thought this was a big role of kapton (polyimide) tape but it's actually polyester. My fault, I didn't read the description enough. Kapton has about twice the heat tolerance (up to 700+F, while polyester tape gets soft and melty around 400+F). That said, I still have plenty of uses for a big thick six inch wide roll of heat resistant tape. The adhesive used is in fact hesitant to leave a residue which is nice.
Jcat
2025-02-19 11:36:58
I've been experimenting with laser-cut vinyl patterns for the holidays, and the smaller transfer tape rolls just weren't cutting it for the larger patterns. This roll is wide enough to cover my stencils in a single strip, vastly simplifying the removal and transfer. I should have sprung for the wide roll in the first place. Lesson learned! I'm quite happy with this larger roll.
dannr
2025-01-28 21:01:45
This is PTFE tape. It is extremely heat resistant. Great for projects like transferring with heat to shirts and tumblers. This is also great for high temp electronics and 3D printing jobs!
Recommended Products
$34.99
$ 15 .99 $15.99