Your cart is empty.
Your cart is empty."The Bosch SP0F000006 is a Nylon Tubing Kit. It is for use with mechanical pressure or mechanical boost gauges and has 1/8" NPT gauge fitting and 1/8" and 1/4" NPT engine fittings. If metric is needed for your application, use adapter kit SP0F000009. Bosch is known for precision, engineering, and innovation. Add style and you have the first-ever line of Bosch gauges, including replacement tachometers, speedometers, temperature and pressure gauges for all applications. Bosch Branded Gauges represent the latest in design following our 100+ year history of Automotive, Industrial, and Racing products.보쉬 SP0F000006은 나일론 튜브 키트입니다. 기계적 압력 또는 기계식 부스트 게이지와 함께 사용할 수 있으며 0.3cm(1/8인치) NPT 게이지 피팅과 0.3cm(1/8인치) 및 0.6cm(1/4인치) NPT 엔진 피팅이 있습니다. 응용 분야에 미터법이 필요한 경우 어댑터 키트 SP0F00009를 사용하십시오. 보쉬는 정밀성, 엔지니어링 및 혁신으로 유명합니다. 스타일을 더하면 교체 타코미터, 속도계, 온도 및 압력 게이지를 포함한 보쉬 게이지 첫 번째 라인을 갖게 됩니다. 보쉬 브랜드 게이지는 자동차, 산업 및 레이싱 제품의 100년 이상의 역사를 따르는 최신 디자인을 대표합니다.".
Tyler
2025-08-30 18:04:51
I put this on a Ford tractor. It was simple to put on and worked as it should. Shipping was fast, and the kit contained everything I needed to complete the job.
Customer
2025-08-02 11:14:25
Upgraded my 76 f150 so I could see the actual oil pressure
JackMiller
2025-07-17 10:54:38
I had another nylon hose that is like 25 years old... it broke at a junction (i thought i blew the engine up there was so much smoke coming off the headers).. but it was just the broken nylon oil line.. i relocated the block connection with an extender i found on Amzn also ('cause on a 289 they are hard to get to on the block). It all worked out well.. no more junctions in the line from the sender (source connection really) to the gauge, no leaks.. all good.
W. K. Crist
2025-07-05 15:45:51
I needed to replace a dripping worn line. The new set works much better but the new pipe leaks a very little bit too at the fitting.
Buck fever
2025-06-06 15:25:44
Worked great.
Ryan
2025-06-02 15:05:32
Needed to replace a tubing fitting on an auto meter boost line. This kit was cheaper than just a single fitting.
Edvardas Vilciauskas
2025-05-04 17:59:47
I used this kit to connect Oil Pressure gauge for my new build SB 350. It was easy to use and came with different attachments... so that was nice.All around - good kit.
BoiseDick
2025-05-03 14:42:52
The main thing to be aware of is that the nylon tubing is tightly coiled and does not want to straighten. I used a heat gun. If you hung a weight to it and left in a warm place maybe that would also straighten it. And while I have not seen kits include them, there should be brass inserts to install inside the tubing to work better with compression fittings. But I bought this as a temp setup and it worked for that.
Brian Beresford
2025-04-29 15:07:38
Product replaced an old leaky line, it worked great!
Cathy Hammer
2025-04-26 10:39:27
Item does what expected connects to my gauge
domenic
2025-03-14 21:51:14
Worked great
John Mann
2025-02-10 17:12:24
Comes with 2 compression sleeves and assorted 1/8 and 1/4 pipe thread adapters. No instructions. Do not over crimp the tubing. Tighten 1/2 to 3/4 turn after snug. This tubing is very stiff and sturdy. It will not stay uncoiled. You can not bend this to get into a tight space.
Recommended Products
