Your cart is empty.
Your cart is empty.Product Description
Consists of 4 pieces including a bottom cap, a top cap, an interior and a shade ring
Has a standard on and off interior with screw terminals that is rated 250 watts and 250 volts
Socket is UL and CSA listed
Easy to Install Replacement Lamp Socket
- Bottom cap is threaded to accept a 1/8 IP rod or nipple
- Medium base
Idaho Anonymous
2025-08-18 16:22:09
I ordered this after not being able to find a replacement at my local big box hardware store. I was able to easily install it and rewire the lamp and it works great.
Laura
2025-08-16 16:24:51
My cat knocked my favorite lamp off the table a couple years ago. I picked up a replacement socket at a local big-box, but after taking it out of the packaging, I found it to be too flimsy, and didn’t install it. I found an old ugly lamp from my garage and learned to live with it. Last week, I saw my old fave sitting sadly in the corner of my garage and decided to give it another try. GREAT IDEA! This set-up is more solid than the original, and way-better than the big-box version. Great buy!
Chris Carter
2025-08-09 17:17:01
I bought this to repair a lamp where the wire had come loose, and the "push in" style wire connection had actually broken off on the inside. The socket portion of this was an exact fit, so I didn't end up using the housing.
newzev
2025-08-06 19:21:50
Price seems on the high side but it is hard to find exact size replacement lamp threaded shells with ring phenolic sockets that fit the lamps over our night tables. While the price seems a little high it is a bargain compared to replacing the lamps. However, the problem with all phenolic sockets is that they are made of plastic and none of them are that sturdy. With time they break. Recommendation, when purchasing lamps check to see if you are getting metal or plastic sockets. If it is possible to get metal sockets I would go that route and avoid lamps with phenolic sockets as they all appear to be made with plastic. Eventually parts of the socket will break that cannot be repaired. You'll know they are broken when the lamp shade starts falling off as the socket will break at the neck.
Timo
2025-07-21 20:00:27
I used this to replace a lamp socket that had a bad switch. It actually fit perfectly and was easy to install.
Customer
2025-07-15 18:24:11
This socket replaced a bad one in a lamp I had. It works well, and has a set screw the original one didn't, so it doesn't turn on the threaded stem.
dotsnail
2025-06-08 11:32:46
I had no trouble replacing a broken lamp socket with this replacement. It is a bit flimsier than the Ikea original, but it is functional. While the original socket had two melamine rings to attach the ring that is part of the frame holding the shade, this one has only one ring.
Alice
2025-04-17 15:23:03
Easy to use, just takes few minutes and lamp is working.
Barbara Dornbierer
2025-03-29 13:49:34
We were going to throw out a very good lamps but discovered we could replace the internals with this part, as good as new, very happy
Bert
2025-02-15 10:21:09
Did the job happy wife.
Recommended Products