Your cart is empty.
Your cart is empty.The brine shrimp incubator contains：1pcs brine shrimp eggs incubator Hatchery，1pcs silver air pump with 1pcs black controller valve,1pcs check valve, 1pcs air stone,1 meter transparent aquarium tubing, 1 meter black airline ,one unit brine shrimp net colllector,two units automatic brine shrimp feeder for fish,three units Brine shrimp suction tube and six units Brine shrimp storage bottle.(If you choose to use the air stone to hatch the brine shrimp eggs incubator then If you use the first way to install the brine shrimp incubator,Please remember to use a scissor to cut one piece small tubing like 0.5 Inch long in the product package to connect the gray acrylic tube and air stone and cut the other small tubing 0.5 Inch in the product package to connect the gray acrylic tube and lid.Please note that gray acrylic tube is not able to connect to air stone and lid directly,which need two small piece tubing to connect air stone and lid.)
Michael Solsky
2025-08-26 18:32:30
The media could not be loaded.
Customer
2025-08-19 09:38:58
Easy to use and put together. Everything you need.
Rob
2025-07-27 12:26:13
Works well for hatching BBS inside my reef aquarium sump, but I wish the tube was a bigger diameter. It is difficult to separate egg shells from BBS.
Joe Jacobsen
2025-05-18 17:51:57
This will hatch brine shrimp, but. To start off I will say that this is the second I have bought. I liked the first one enough, and I have enough of a need of BBS to need two hatcheries. The first I used all hose that I had purchased myself, and it's a good thing for this seller. The first one I bought was clearly used. The tube was dirty and had salt residue on it. The pipettes were all smashed, the suction cups were all smashed and in now way ever going to work. There was no instructions included with the first. In the meantime we bought another pack of pipettes and everything was ok. So I buy another. The second one arrives, not used, pipettes not damaged, suction cups in working order. So I set it all up with the included hose. I tee off the original air line (Really no use to use two pumps) and get everything running. Later that day I went to check my first hatchery and notice that the air isn't working in either. I find that the air hose provided has slipped off the tee. I reattach it and go on with my day. I go out later and again, the air line (The one supplied) has slipped off the tee. At this point my 2 batches of BBS are both dead. I reattach the hose, and zip tie it on. Reset up both with new water, salt and eggs, and go to bed. In the morning again, it has slipped off the tee. At this point I realize the hose is not of high enough quality to withstand a 10 degree temp change and remain on the tee. I swap out the supplied hose with that super high quality $5 per 25 feet of store bought hose. Get both hatcheries cleaned out of dead BBS and eggs, and remake the watersaltegg combo. Throughout the day yesterday everything is great. No hoses coming off. I get up this morning and what do you know, the air hose from the valve to the very top of the hatchery (2 inches of air line) has slipped off... Again, the supplied hose is garbage. Another batch (possibly 2) of BBS is dead. Thankfully my fry is big enough that it has been eating flake food, or at this point I would have had 250 baby Gourami dead. The hatchery and air pump seem to be fine. But the hose is complete garbage. If this company is trying to save money by skimping on what has to be the least expensive part it is very sad. The hatchery comes supplied with 2 types of hose, and about 30 feet total. It needs about 4 inches to go from the valve to the bottom, and the inside to the solid tube. Depending on where you were to place this it may take 5 feet to get from the air pump to the hatchery. If they were to buy good quality hose in bulk it couldn't possibly increase the bottom line too much.My bottom line on this product is the hatchery is good. It works, but do yourself a favor and just toss the supplied hose right in the bin.
s norsworthy
2025-05-07 18:49:11
This works great for small tanks.. You can hang it on the inside of your tank to keep the temperature consistent.. or you can put it on the counter with a light to keep it warm.. simple to put together easy to clean.. it’s perfect for when you have a smaller amount of fish to feed…
Melissa Snider
2025-05-06 18:40:31
First thing to note is this hatchery is quite small. So small, that when you use the air pump even on low settings, the bubbles go up very high and spray eggs and salt on the top part of the cylinder and outside of the hatchery. Because of this, many eggs won’t hatch. I started using double the quantity of eggs that I would normally use to make up for this, but this hatchery is not convenient, clean or economical. I tried both hatching methods listed on the instructions multiple times with different cysts, nothing worked. I’m going back to my soda bottle hatchery. DO NOT BUY.
James Grace
2025-04-23 18:28:45
Does what it's made to do
MK
2025-04-13 15:31:34
Product includes a picture of the set and three ways you can set it up. One includes threading an acrylic tube into a silicon tube to feed the air from the top, which was my preference. There is no way to get the acrylic tube into the silicon tube and no suggestion how. Once attempted, the tube became stuck halfway, so it’s unusable. I purchased new tubing separately and failed again. Product is useless.
Zenou
2025-04-01 16:03:43
This product is insane. Maybe small, but insane.
Salomé
2025-02-16 13:32:23
Me gusto aunque siento que es un poco chico
Don’t buy from them
2025-02-12 18:26:27
takes a couple days for the eggs to really hatch and not many hatch consistently but it does work, raised some fry with these
Ally
2025-01-20 15:39:58
Terrible design, way too small, makes a terrible mess. Sent it back and built a home made one with a pop bottle which works so much better and no mess.
Recommended Products
