Your cart is empty.
Your cart is empty. Replacement OEM part for your Broilmaster grill.
• Broilmaster Natural Gas Twin Valve Assembly
• Replacement part for P3, P4, D3, and D4 Broilmaster grill models (male flare fitting)
• Stainless steel mounting bracket
• OEM Part Number B100514
The Dude
2025-08-18 13:11:07
I ordered this to replace the original part. It functions the same and installed easily. Great product and Id buy again if needed.
David Demaree
2025-08-12 10:31:43
Work’s and fits like new.
dgac63
2025-08-04 18:02:53
One side of my grill was not heating due to a crimp in the line to that side of the grill. This fixed the issue and the grill is as good as new again. I should have bought it sooner as the grill was not working properly for over a year. You need to have a little experience with how to safely perform natural gas repairs or get some on youtube or some other source but the process was pretty straight forward and easy.
Shannan
2025-07-24 12:52:07
I've replaced the bowtie three times now over the years. It seems each time it gets less compatible with (further away from) the valve assembly. I needed to bend the metal on the assembly to get it to connect well but the metal is thin enough that it was an easy task. Once I got it in and finessed it a bit it seems to work very well. Best part: very easy to do.
Marko87
2025-07-15 19:45:00
I just refurbished my old broilmaster grill. This corrected an issue with half the grill not heating properly. A very cost effective fix, with the replacement burner. The part fit, and installation was pretty easy. If you have the old style copper gas tube, convert to the newer flex pipe and you should be able to complete this project in less than 45 minutes. The part was well protected in the shipping container. Very important as you would not want the tubes to bend or kink.
Dr. Peter J. Hauser
2025-06-30 12:25:59
the valve came in a plastic bag but the pipes weren't kinked, a box would have been better. I was able to bend them to correct locations without issues
NC 4 Wheeler
2025-06-24 18:37:37
This is not a quality product and does not fit original Broilmaster Grill Body 3. Either it was not made to fit this Broilmaster, or was not properly mfrd correctly or was bent during its journey to me.As you can see from pictures the gas connection is shorter that original. The jet tubes are not shaped correctly and are cheap aluminum welded broke and should be a fitting.I will have to Frankenstein the freaking thing or buy another.
Techyplus
2025-06-22 15:23:48
Did not need to replace...so no real experience if good or bad
The Dude
2025-05-18 10:21:37
I ordered this to replace the original part. It functions the same and installed easily. Great product and Id buy again if needed.
David Demaree
2025-05-16 20:46:28
Work’s and fits like new.
dgac63
2025-05-08 09:31:28
One side of my grill was not heating due to a crimp in the line to that side of the grill. This fixed the issue and the grill is as good as new again. I should have bought it sooner as the grill was not working properly for over a year. You need to have a little experience with how to safely perform natural gas repairs or get some on youtube or some other source but the process was pretty straight forward and easy.
Shannan
2025-04-12 10:36:00
I've replaced the bowtie three times now over the years. It seems each time it gets less compatible with (further away from) the valve assembly. I needed to bend the metal on the assembly to get it to connect well but the metal is thin enough that it was an easy task. Once I got it in and finessed it a bit it seems to work very well. Best part: very easy to do.
Marko87
2025-04-10 12:07:49
I just refurbished my old broilmaster grill. This corrected an issue with half the grill not heating properly. A very cost effective fix, with the replacement burner. The part fit, and installation was pretty easy. If you have the old style copper gas tube, convert to the newer flex pipe and you should be able to complete this project in less than 45 minutes. The part was well protected in the shipping container. Very important as you would not want the tubes to bend or kink.
Dr. Peter J. Hauser
2025-03-14 21:39:47
the valve came in a plastic bag but the pipes weren't kinked, a box would have been better. I was able to bend them to correct locations without issues
NC 4 Wheeler
2025-01-16 20:28:03
This is not a quality product and does not fit original Broilmaster Grill Body 3. Either it was not made to fit this Broilmaster, or was not properly mfrd correctly or was bent during its journey to me.As you can see from pictures the gas connection is shorter that original. The jet tubes are not shaped correctly and are cheap aluminum welded broke and should be a fitting.I will have to Frankenstein the freaking thing or buy another.
Techyplus
2024-12-18 18:11:38
Did not need to replace...so no real experience if good or bad
Recommended Products
