Your cart is empty.
Your cart is empty.Product Description
3 Way Brass Shower Arm Diverter with Handheld Shower Mounting Bracket-Brushed Nickel
Material: Solid metal brass.
Color:Brushed Nickel.
Connection: One G1 / 2 female water inlet (connect to shower arm), two G1 / 2 male water outlets (connect to hand shower and fixed spray head).
Function: 3-way functions. An adjustable shower head holder with brass ball joint connector, rotates 360 ° freely to adjust the angle and position to meet your needs. The shower holder holds the hand shower securely without falling and slipping.
Flow: A large flow channel allows high pressure and strong water flow, with no flow limitations.
Installation: A free metal swivel nut, easy to install, no plumbers needed. Includes: 1 shower diverter valve, 1 set of rubber gaskets, 1 installation manual, 1 Teflon tape.
SHOWER HEAD DIVER VALVE
When the handle lever is back 180 °, the water flows from the hand shower.
When the handle lever is forward 180 °, the water flows from the fixed shower head.
When the handle lever is up 90 °, the water flows from the hand shower and the overhead shower simultaneously, but the water flow is reduced by half each and depends on the water pressure.
Hand shower bracket slot diameter
Card slot and shower hose bottom diameter
The shower support bracket is designed conical, the top diameter is 0.9‘’. Bottom diameter 18mm. Fits 19mm to 20mm universal shower hose. Note: The Waterpik Massgaes Handheld Shower Head will not fit this mount.
Shower hose bottom diameter 19 ~ 20mm
If shower hose bottom diameter is 0.75 ~ 0.78‘’ (19-20mm), it perfectly fits the shower head holder.
Shower Hose Bottom Diameter 21 ~ 22mm
If shower hose bottom diameter of 0.83 ~ 0.87''(21-22mm), it is also suitable for shower head holder.
Shower hose bottom diameter above 23mm
If shower hose bottom diameter 0.9'' or larger (> = 0.9''), it is not suitable for shower head bracket.
Shower diverter with adjustable holder for hand/fixed shower
- Designed with a handheld shower mounting bracket bracket, this shower arm diverter is adjustable and rotatable.
- The sturdy hand shower holder holds the hand shower securely without sliding off easily.
- Single large angle swivel max 55 ° forward and backward.
- A 100% brass metal swivel ball joint connector is durable and stronger than plastic.
- Freely rotate the handheld shower mounting bracket to any angle or position to suit your needs.
- Tapered card slot diameter design, top diameter is 0.9'', bottom diameter is 0.787'', depth diameter is 1.142''. Fits for Shower Hose Bottom Diameter 19-22mm, not compatible with Shower Hose Bottom Diameter above 23mm and Waterpik Shower Head.
Dixieland Delight
2025-09-02 11:38:11
Great quality, easy to install. A little small for my handheld but it fits in there, just snug.
Tomas D.
2025-08-30 18:38:38
Works well. The openings inside it allows high pressure flow. The side holder for the shower wand holds it well. The construction is all metal and feels solid. The knob turns smoothly and has 3 diverting options as advertised. Comes with the plumbing tape, so it has everything you need to set it up. Brished nickel option matches other appliances. Happy with the product so far - no leaks.
Ira K
2025-08-26 10:38:42
I’m only a couple of showers in, but I’m extremely satisfied with this product. It’s 100% metal, as advertised. I couldn’t find a single plastic bit on it. It didn’t leak at all on my first try installing it. It came with a couple extra rubber washers for attaching the hose. The knob to switch between overhead and handheld shower heads doesn’t click into place for the three settings—it turns smoothly from end to end. But the settings are distinct, and it doesn’t leak any water to the other shower head when you have it set to one of them. The ball joint for the handheld shower holder has a good amount of tension. It stays in place but it’s easy to move when you want to. I feel like I get good flow and water pressure when I have it set to use both showerheads—better than when I used the Wirecutter-recommended Moen 26008 combo shower head. Speaking of which, I bought this because a plastic piece on that broke. This is a much higher-quality part.The only downside is that it has the brand name etched into the top, but I can’t even see that once it’s installed.I don’t know why the review is asking about thickness lol but it’s thicc
Steve G
2025-08-01 11:51:02
I got the brushed nickel "swivel mount" diverter. As advertised, it's solid metal construction and well put together. The diverter handle turns smoothly and easily, and the shower head holder has enough tension to stay in place where you put it. This is a far better item than the "Glacier Bay" equivalent I had bought from Home Depot, and barely costs any more. I really appreciate the seller including in the listing the exact dimensions of the shower head holder, so I could be sure mine would fit - not a "perfect' but a "suitable" fit, just as they said. The finish is good too. Now I just hope it lasts, but I see no reason to expect otherwise.
JW
2025-07-29 18:37:04
Very solid product, valve works smoothly and easily. It is a metal diverter, not ABS plastic. Plating on the threads is a little heavy. In my case, required a wrench to install shower head owing to tight fit, but works.
H. Hellman
2025-07-23 17:21:36
This all metal part is sturdier than the diverter our original shower head came with. It immediately stopped the leaking from our shower head and appears to be more stable and easier to use than the original. This saved us from having to replace a very expensive shower head and we are hoping it will provide more sustainability over the plastic part of the name brand.
Ellen
2025-07-07 17:24:24
Came with extra rubber gaskets and teflon tape. Color was accurate. The holder fit the wand handle. Perfect shower replacement valve.
Michael Miller
2025-07-02 21:18:31
Had to repair the outdoor shower at the beach house and found a plastic part at the local hardware store. You get what you pay for and left me still searching. This product is a very solid product and it is evident when holding in your hand. Solid construction and the diverter valve is solid and smooth. Highly recommend this product!
Customer
2025-06-21 17:49:28
So far so good. Installed really easy. Easier than some others that I've tried that have leaked and had to be returned. Even the shower head which is finicky as ever with screwing it on to the adapter went on incredibly easy, whereas other adapters. It was a pain in the rear end. Even trying to put the shower head back on to the original pipe. Coming out of the wall is a pain in the rear end but going on to this adapter was amazing. I have no idea why. I like the fact that you can adjust the holder and that they give you three extra gaskets and the Allen key to make the adjustment. And the best part so far it doesn't leak anywhere which is great. The handle to turn the water on between the shower head or the handheld is very smooth moving which is also really nice. I've used some other adapters from other companies and it requires a tad more work to turn it where this is really nice, smooth, and very easy to maneuver. Overall, I'm extremely happy with this adapter. It's great. If anything happens over the next month i will update the post, but so far i am loving it, which is great considering some of the other reviews on some of the other adapters on amazon
Dixieland Delight
2025-05-29 14:13:00
Great quality, easy to install. A little small for my handheld but it fits in there, just snug.
Tomas D.
2025-05-20 15:05:39
Works well. The openings inside it allows high pressure flow. The side holder for the shower wand holds it well. The construction is all metal and feels solid. The knob turns smoothly and has 3 diverting options as advertised. Comes with the plumbing tape, so it has everything you need to set it up. Brished nickel option matches other appliances. Happy with the product so far - no leaks.
Ira K
2025-05-10 14:02:04
I’m only a couple of showers in, but I’m extremely satisfied with this product. It’s 100% metal, as advertised. I couldn’t find a single plastic bit on it. It didn’t leak at all on my first try installing it. It came with a couple extra rubber washers for attaching the hose. The knob to switch between overhead and handheld shower heads doesn’t click into place for the three settings—it turns smoothly from end to end. But the settings are distinct, and it doesn’t leak any water to the other shower head when you have it set to one of them. The ball joint for the handheld shower holder has a good amount of tension. It stays in place but it’s easy to move when you want to. I feel like I get good flow and water pressure when I have it set to use both showerheads—better than when I used the Wirecutter-recommended Moen 26008 combo shower head. Speaking of which, I bought this because a plastic piece on that broke. This is a much higher-quality part.The only downside is that it has the brand name etched into the top, but I can’t even see that once it’s installed.I don’t know why the review is asking about thickness lol but it’s thicc
Steve G
2025-05-08 14:00:12
I got the brushed nickel "swivel mount" diverter. As advertised, it's solid metal construction and well put together. The diverter handle turns smoothly and easily, and the shower head holder has enough tension to stay in place where you put it. This is a far better item than the "Glacier Bay" equivalent I had bought from Home Depot, and barely costs any more. I really appreciate the seller including in the listing the exact dimensions of the shower head holder, so I could be sure mine would fit - not a "perfect' but a "suitable" fit, just as they said. The finish is good too. Now I just hope it lasts, but I see no reason to expect otherwise.
JW
2025-05-04 14:50:51
Very solid product, valve works smoothly and easily. It is a metal diverter, not ABS plastic. Plating on the threads is a little heavy. In my case, required a wrench to install shower head owing to tight fit, but works.
H. Hellman
2025-04-25 16:05:13
This all metal part is sturdier than the diverter our original shower head came with. It immediately stopped the leaking from our shower head and appears to be more stable and easier to use than the original. This saved us from having to replace a very expensive shower head and we are hoping it will provide more sustainability over the plastic part of the name brand.
Ellen
2025-02-16 18:06:45
Came with extra rubber gaskets and teflon tape. Color was accurate. The holder fit the wand handle. Perfect shower replacement valve.
Michael Miller
2025-02-14 10:18:48
Had to repair the outdoor shower at the beach house and found a plastic part at the local hardware store. You get what you pay for and left me still searching. This product is a very solid product and it is evident when holding in your hand. Solid construction and the diverter valve is solid and smooth. Highly recommend this product!
Customer
2025-02-11 14:55:00
So far so good. Installed really easy. Easier than some others that I've tried that have leaked and had to be returned. Even the shower head which is finicky as ever with screwing it on to the adapter went on incredibly easy, whereas other adapters. It was a pain in the rear end. Even trying to put the shower head back on to the original pipe. Coming out of the wall is a pain in the rear end but going on to this adapter was amazing. I have no idea why. I like the fact that you can adjust the holder and that they give you three extra gaskets and the Allen key to make the adjustment. And the best part so far it doesn't leak anywhere which is great. The handle to turn the water on between the shower head or the handheld is very smooth moving which is also really nice. I've used some other adapters from other companies and it requires a tad more work to turn it where this is really nice, smooth, and very easy to maneuver. Overall, I'm extremely happy with this adapter. It's great. If anything happens over the next month i will update the post, but so far i am loving it, which is great considering some of the other reviews on some of the other adapters on amazon
Recommended Products