Your cart is empty.
Your cart is empty.Product Description
Ron
2025-08-19 21:20:51
Worked for my application.
S Miller
2025-08-16 11:22:29
Not much to say about these - they fit in the extrusions and work like they should.
MNDave
2025-08-03 12:23:42
I got these to pair up with a 6' stick of 10 series 8020 extrusion and use them with a bolt to hang AR500 targets. They are nice and secure wherever I place them, and are easy to move. Buying official hardware from 8020 is a quick trip to the poor house, so it's nice to see some reasonably priced items available for purchase.
David
2025-07-27 10:28:08
I decided to build an outer frame with plexiglass panels for my CNC machine to contain the noise, and these worked great.They fit my extrusion perfectly and are plenty strong enough to secure the panels to the extrusion nicely without loosening up and rattling like the first set of cheap ones I picked up. Great product for a bargain.
Customer
2025-07-13 10:20:33
These threaded tabs were just what I needed for my t tracks on my work bench. They allow me to fasten a variety of things securely. The only drawback is that though you can drop them into the track anywhere, they also get sucked up by the vacuum when cleaning the track. If they were 1/16†wider they would remain in the track.
Mike T. Rochester, NY
2025-07-04 12:22:27
I got these for woodworking applications where the 3/4" x 3/8" T-track is a standard. The nut slides right in, but since it is 1" long, it cannot rotate and acts as a lock for tightening things down in a specific place, such as fingerboards, clamps, etc.The nuts are well made and screws/bolts insert and thread in easily. The coating improves corrosion resistance. If the nut is down in a track, a 1/4" screw can be inserted at least 2 full turns before it "bottoms out" in the track. This is plenty far enough to provide a good grip, as evidenced by my pulling on the assembly and feeling the strength. Tightening something down will tend to drive the screw further into the nut and won't cause loosening. Unscrewing a lock-down knob might tend to loosen the assembly if the knob somehow binds on the 1/4" screw, so a bit of lubrication would help if this somehow happens.
M Oney
2025-06-29 16:41:34
Occasionally I need tee nuts like this for different projects that I'm working on. In the past I've made my own from soft steel and just threaded them myself, which works okay, but sometimes it's not as strong as the commercial ones available. These appear to be quite strong, and they fit the tee tracks as expected. Also, like the fact that there's a pack of 25 of them, which should last me good number of projects.
Woodworx
2025-02-12 15:56:16
I use these with great success on my CNC machines. They fit perfect in the T tracks for clamping down work pieces. They are strong and hold up to repeated torquing down of clamp bolts
Recommended Products