Your cart is empty.
Your cart is empty.omarrie David
2025-09-04 16:49:22
I installed a stereo system in my vehicle bit the bass was rattling the door panels and it sounded annoying. I decided to purchase these mats and what a BIG difference! The installation was super easy and now I don't hear any rattling and the sound is clear and crisp now. The mats are heavy and of very good quality so durability isnt an issue and I was surprised that they didnt have a strong smell.I must say that they're worth the money and the customer service is awesome! I highly recommend
Jason R. Rines
2025-08-21 14:11:17
The media could not be loaded.
Dmitry
2025-07-31 18:14:40
Bought these for my Camry, they work great. Easy to apply and made the road noise noticeably quieter. I will probably get some for my doors as well. Great product.
lela brown
2025-07-03 14:42:58
The installation took time inside the fender wells and trim panels but was worth the effort. Made a BMW that was quite even quieter. 60 mph sound level at 70mph.
Thomas M. Nathe
2025-07-02 10:23:59
While not designed for working on a forced air furnace, it does help to cut the dB level by about 5dB (from 80 to 75dB).It helped to cut down on the subsonic vibration on the furnace walls as well. The adhesion worked well - if you use a roller to press out most of the diamond pattern.
Customer
2025-06-13 14:36:30
put these on my stainless steel sink, helped make it more solid and minimize ping
Nozama
2025-05-20 16:45:23
FYI if you don't already know, most of the noise comes from the wheel wells so DO THE WHEEL WELLS FIRST! And you probably don't need to do anything else besides that because 90+ % of all the noise comes from the wheel wells area (from road noise as the tires roll on the road and vibrate the air). Don't bother with the floor, the doors, the trunk, or the roof unless are looking for that last 10% of improvement because you are a car stereo enthusiast (or you like to waste money and do extra work LOL). I put multiple layers of butyl sound mats totalling about 1/4 inch on my four wheel wells (plus about 2 inches farther around the perimeter of the wheel wells), and just a little bit on the front floor (driver and front passenger floor) but I probably didn't even need the floor. The wheel wells made a HUGE difference. My car had NO sound insulation whatsoever and was horrible to drive on the highway, now it is PLEASANTLY QUIET and a joy to drive. I actually also put alot of sound mats on the middle and back floor, but it didn't make any difference so I removed it. So I recommend a minimum of two 80-mil layers on all four wheel wells, but preferably four layers to total about 1/4 inch. Or use three layers of the 120-mil mats. The more the better, but it seems to me that 1/4 inch is enough to bring the noise down to a luxury level.
Jacob
2025-05-05 11:16:31
The media could not be loaded.
Mike Edwards
2025-05-04 11:08:06
So to start I have degreased anything that wouldn't promote adhesion and they still don't stick very good. I have also rolled over the product with a roller to promote better adhesion and it almost made it worse at times.I'm not sure how long this will so a further review in the future may be necessary.
Josh
2025-04-05 12:37:40
Straight out of the box you can tell its good quality and it does the job well. Great value for money, i would recommend.
Mauro Alberti
2025-02-09 18:35:58
Ero un scettico ma però il prodotto è veramente efficace e fatto molto bene
Michael Servos
2024-12-13 10:19:23
Sehr gute Qualität. Gut zu verarbeiten
Antonio Alvarado Romero
2024-11-27 15:30:32
Perfecto muy recomendable
Recommended Products