Your cart is empty.
Your cart is empty.carlson- 16011 HARDWARE
-=Rudy=-
September 5, 2025
I had a bit of a problem installing these, but it turns out that this is by design. It is hard to insert the caliper pin once installing this boot on the caliper. But if you use quality brake lube and work the caliper pin back and forth, eventually it will fit into the caliper. (The rubber is very tight.) You will want to add lube into the caliper prior to installing the boot, as inserting the pin through the tight rubber will remove the lube.
Robert Snow
September 4, 2025
The Carlson 16011 boots fit the rear caliper guide pins on my 2007 V6 Accord MT coupe perfectly. Honda only sells the boots in pairs as part of a refresh kit that costs $42 per caliper. One of my boots had a small hole that was leaking grease and the replacement fit perfectly. The four boots supplied were enough to do both rear calipers. Thankfully, none of the pins were corroded so I cleaned and re-greased all four with Sil-Glyde.
Rocky
August 26, 2025
It fits but looks like not completely same as the OEM one.
Albert A.
August 23, 2025
Fit 2012 Honda CR-V.
Edgar DeMelo Santos
August 19, 2025
Great value.
C.T.
August 2, 2025
Worked good glad there were 4 because all of the old ones ripped
D. Medina
July 16, 2025
giving this 3 stars as I could not find anything else. I bought these for the rear calipers of my 2009 civic SI sedan. They were VERY tight fitting. On one caliper, I could not even get it to fit, so it is just sitting on the pin. I am not sure how well they will work out, I guess only time will tell. I would try to contact Honda dealer to get replacements instead of these. Even the front ones I would say are YMMV.I also bought some for my Corvette, but the picture looks NOTHING like what is on the car. I have not installed those yet, but hopefully they work out. RockAuto showed the same thing as these.
Julia S.
July 13, 2025
Fit perfectly on my 2008 Honda CR-V rear brakes. Quality looks to be as good as oem parts
Groundforcegarden
June 24, 2025
Quality, perfect fit. Honda Civic coupe 2011
Ricardo Ruiz
June 23, 2025
Es un buen producto, fue lo que yo esperaba, con la calidad necesaria y que llego en el tiempo previsto.
Hoang
June 13, 2025
feel good, durability stand by use time. but the price is a bit high
Mario Tonalli Avila Morales
June 4, 2025
Todo funcionando
Claudio
May 20, 2025
Fits the caliper /pins perfectly.
-=Rudy=-
May 18, 2025
I had a bit of a problem installing these, but it turns out that this is by design. It is hard to insert the caliper pin once installing this boot on the caliper. But if you use quality brake lube and work the caliper pin back and forth, eventually it will fit into the caliper. (The rubber is very tight.) You will want to add lube into the caliper prior to installing the boot, as inserting the pin through the tight rubber will remove the lube.
Robert Snow
April 21, 2025
The Carlson 16011 boots fit the rear caliper guide pins on my 2007 V6 Accord MT coupe perfectly. Honda only sells the boots in pairs as part of a refresh kit that costs $42 per caliper. One of my boots had a small hole that was leaking grease and the replacement fit perfectly. The four boots supplied were enough to do both rear calipers. Thankfully, none of the pins were corroded so I cleaned and re-greased all four with Sil-Glyde.
Rocky
April 19, 2025
It fits but looks like not completely same as the OEM one.
Albert A.
March 23, 2025
Fit 2012 Honda CR-V.
Edgar DeMelo Santos
February 25, 2025
Great value.
C.T.
February 19, 2025
Worked good glad there were 4 because all of the old ones ripped
D. Medina
February 4, 2025
giving this 3 stars as I could not find anything else. I bought these for the rear calipers of my 2009 civic SI sedan. They were VERY tight fitting. On one caliper, I could not even get it to fit, so it is just sitting on the pin. I am not sure how well they will work out, I guess only time will tell. I would try to contact Honda dealer to get replacements instead of these. Even the front ones I would say are YMMV.I also bought some for my Corvette, but the picture looks NOTHING like what is on the car. I have not installed those yet, but hopefully they work out. RockAuto showed the same thing as these.
Julia S.
January 23, 2025
Fit perfectly on my 2008 Honda CR-V rear brakes. Quality looks to be as good as oem parts
Groundforcegarden
January 18, 2025
Quality, perfect fit. Honda Civic coupe 2011
Ricardo Ruiz
January 13, 2025
Es un buen producto, fue lo que yo esperaba, con la calidad necesaria y que llego en el tiempo previsto.
Hoang
January 9, 2025
feel good, durability stand by use time. but the price is a bit high
Mario Tonalli Avila Morales
January 5, 2025
Todo funcionando
Claudio
December 12, 2024
Fits the caliper /pins perfectly.
Recommended Products
$26.44
$ 13 .99 $13.99