Your cart is empty.
Your cart is empty.
As you drive your car around town, things like paint overspray, brake dust, pollution, and industrial contamination land on the paintwork and get stuck in the tiny pores of the surface. The clay bar works by grabbing onto any contamination that sticks onto the surface of your vehicle, then pulls it out as you rub the clay across the paintwork, restoring a smooth-to-the-touch surface primed for polishing, or a pristine coat of wax or sealant.
To help your clay bar glide across the surface without getting stuck or marring the glossy shine, you need a lubricant. This is where Clay Luber comes into play: simply mist Clay Luber over the surface to lay down a coat of slick lubrication between the clay bar and your paintwork. Now as the clay bar grabs onto the above-surface contamination stuck on top of the paint, it won’t get stuck to or mar the painted finish.
Use This To:
- Create a super slippery surface for your clay bar
- Extend the life your natural clay bar
- Decontaminate any shiny or clear exterior surface
- Prevent scratching and swirling
- Restore glass smooth feeling on glossy surfaces
Visit The Chemical Guys Store on Amazon to see our entire Arsenal; find Pro Tips, Special Promotions, and New Product Launches; Link at the top of the page, Click Follow!
Works safely on all automotive vehicle brands including: Acura, Audi, BMW, Buick, Cadillac, Chevrolet (Chevy), Chrysler, Dodge, Fisker, Ford, GMC, Honda, Hummer, Hyundai, Infiniti, Isuzu, Jaguar, Jeep, Kia, Land Rover, Lexus, Lincoln, Mazda, Mercedes, Mercury, Mini, Mitsubishi, Nissan, Pontiac, Porsche, RAM, Saab, Subaru, Tesla, Toyota, Volkswagen, and Volvo; and RV brands like Coachmen, Entegra, Forest River, Newmar, Thor Motor Coach, Winnebago, AirStream, K-Z, Keystone and Midwest Automotive Designs.
Chris Fischer
August 13, 2025
I am happy with this purchase. I used it to buff out a faded vehicle and it worked great and a little went a long way. Thanks for a great product. I would but it again if I need it. I believe the bottles will last a long time. Thanks.
Mark D.
August 8, 2025
About 6 months after I got a new truck I took it off-roading, rolling down narrow trails for about 8 hours. Branches often scrapped the sides of the truck leaving hundreds of superficial scratches. Fortunately, nothing that wouldn't buff out. I had some MacG*****, you know the product. I had enough to do one side of the truck. Worked my way through 4 different "grits". It took a couple hours+ but it removed most of the scratches. I wanted to try out this product so I bought the 4 pack and used it to do the other side of the truck. Chemical Guys recommended using the lightest grit first to reduce how much paint gets removed. Okay, I tried it. One pass removed 90% of the scratches. Second pass, they were 99% removed. Doing the whole side of the truck took a half hour or so and left the truck much more shiny than the other side. I was really impressed. It was a little harder to wipe off than the other product but worked so much better it more than made up for the time. I didn't intend this to be a side-by-side comparison, I just wanted the scratches out of my truck's paint. Running out of product halfway just made it work out to be exactly that, a side by side comparison. I found it works much better than the other stuff. The most aggressive grit is quite aggressive, you may not need to buy the 4 pack, you might just get by with the least 1 or 2 aggressive levels depending on what you're buffing out.I also do woodworking, I turn pens on a lathe for fun and profit and I use this product to shine up CA glue finish and resin castings. I had similar results to my experience with the truck. It worked so much better than the McG product. It really reduced my sanding time. I used to go through all the micro-mesh pads then use McG, now I sand to 600 and just use the Chemical Guys product, done!I will absolutely be buying this again. Funny thing, it's easier to buy on Amazon than the Chemical Guys website. They'd been out for months when i thought to check Amazon and was surprised to find it available.So, bottom line, this is a really good product and well worth the extra money. You may not need such an aggressive grit though so you might consider just getting the lightest grit first and trying it out. Good luck and happy buffing.
jeff h.
August 5, 2025
this pack dose it all love it
Antonio velez
July 24, 2025
Gives car a nice finish when used properly
Customer
July 19, 2025
Used this set in combination with Chemical Guy's clay-bar kit, and WOW. 14+ years of dirt and swirls came right out. I've never done more than just a simple hose-down and sponge-scrub on any of my vehicles, but this stuff was easy to use and beat my expectations.Started by giving the bike a wash with the Clean Slate wash from the clay-bar kit, then went over it with the claybar (which is the point where the before pic was taken). Then proceeded through each of the 4 polishing compounds in this kit with a cheap set of 3in polishing pads and my corded drill. Dabbed it on and started slow to spread it, then a few passes a bit faster, one final pass at top speed, then wiped off the residue with a microfiber towel. Then grabbed a fresh pad and repeated with the next compound... After all the polishing, I applied the Butter Wax from the clay-bar kit and gave one final buffing by hand to get the after shot.For my motorcycle, this set had more than enough compound to do the whole bike several times over, but I imagine it'd be cutting it pretty close trying to do a whole car. And that said, it feels a little pricey for such small bottles... But this kind of paint correction shouldn't have to be done too often, so after seeing the difference, it's definitely worth it!
ConstantShopper
July 12, 2025
My first major detail on any car and specifically on my 2012 Audi A7. The paint was overall in good shape but I had water spots, a lot of swirls and a few significant scratches. With the positive reviews I decided to give the products a try. I spent 2 1/2 days on the job but I think the results were spectacular. I used the V36 and V38 pretty much over the entire car and even before I got to the extra steps past the compounding I could see that I was going to achieve a great paint finish. There was no sticking of either compound. It went on and came off with easy using the Porter Cable 7424XP Polisher. I used an orange Country Lake pad with the V36 and a white pad for the V38. The removal of the defects was very apparent. Using the subsequent products, the color and brilliance of the black paint was beyond my expectations. The image I've attached is before I had applied any Füzion Carnauba Polymer Estate Wax but truthfully I don't think I would have needed any except for protection. Literally every spec of dust and any little defect shows up on such a nice black finish so now I need to buy a cover for the Audi. Otherwise I'm going to lose my perfect finish pretty quickly. Here was my protocol if you're interested. See what you think. * Wash & Dry * Clay * IPA Wipedown * Chemical Guys GAP_VKIT_16 V Line - V36 & V38 * Wolfgang Total Swirl Remover 3.0 * Pinnacle Advanced Finishing Polish * Wolfgang Finishing Glaze 3.0 * Chemical Guys GAP_619_16 Black Light Hybrid Radiant Finish Color Enhancer * Wolfgang Deep Gloss Paint Sealant 3.0 * Wolfgang Füzion Carnauba Polymer Estate Wax
gerardo t.
July 7, 2025
Buen producto. Calidad/precio.
Gerry
April 25, 2025
It is worth the value for your money, and it took me awhile to get used to it with different polishing pads, I am still experimenting with the products. The end result is great the sheerness is great and the products are applied great.
Inscrutable
January 6, 2025
These are very good for polishing epoxyglass resin, even the coarsest delivers a glassy shine. I've dedicated a foam disc to each grade. The aroma is quite tolerable, a vague and inoffensive lemony scent. The downside of these polishes is that they will reveal scratches deeper than 1200 grit or so, so make sure your work is well sanded!
Terry
December 10, 2024
Bought this sampler kit after watching the Chemical Guys videos on how to remove paint transfer and scratches. This stuff definitely works as advertised! I used the V34 polish with the Porter Cable 7424XP DA that I purchased and CG orange hex pad. I buffed out all scratches from the hood of my wife's 2003 corolla then followed up with the white hex pad V36 then V38 polish. WOW! Looks like new again!I moved onto my car that had paint transfer on rear door/wheel well, and in about 5 minutes it came off completely. I was afraid of burning the paint on the wheel well so I used a piece of the CG orange hex hand pad that I cut off with V32 polish. I had to rub vigorously for a few mintures but the paint transfer came out. Now you cannot tell the white paint transfer lines were ever on that part of the car unless you look up real close and see indentations from the deeper scratches but thankfully it didn't get to past the clear coat.I ordered more of the V34 and V38 to do a two step polish on our cars for the future.
Goerks
November 22, 2024
excelente producto, el 32 para despues de la lija de 3000 me funciono bien, luego el 34 y asi, para una parte recien pintada. En partes donde la pintura era la original solo use el mas fino. el acabado me gusto muchisimo.
Recommended Products
$31.99
$ 14 .99 $14.99