Your cart is empty.
Your cart is empty.
Feature:
Durable material:
Made by space aluminum, it has the feature of light and durable and with high strength and corrosion resistance.
Adjustable:
Straight and tilt position in about 90 degrees, you can choose the water jet position freely.
Easy to install:
No drill needed, won't damage your wall because it has strong adhesive, you only need to paste it.
Each bracket has 2 hooks, can help to fix the shower head.
Rang of application:
This shower head bracket is compatible for all the standard shower head; Fit for a variety of smooth walls, marble, metal panel, smooth wood, paint plate, ceramic tile, smooth glass, etc..
Specification:
Material: space aluminum
Quantity: 2 packs
Color: silver
Size: 3.94 inch/ 10 cm in length, 2.95 inch/ 7.5 cm in width, 2.36 inch/ 6 cm in height
Warming note:
Before use it, please make sure the contact surface is clean and dry.
LLP
2025-08-25 17:33:54
We have purchase 3 sets of these now.They work great, easy to apply and they are there.We used them in several bathrooms in different homes and they work great.Ours has been on our shower wall over 5 years now and still holds strong.I highly recommend and I would buy again.
Lynn Bylina
2025-07-30 14:43:25
This is a good product and does stay on the wall
Todd
2025-07-20 13:31:05
There is absolutely NO getting this thing off the tile. Once it begins to stick, you might as well put the rest of it on because you cannot pull it off even when just a corner has been applied. It does NOT want to come off the tile once you get a corner stuck on. The adhesive is incredible. Permanent!So be very careful.Another thing to be extremely careful about is that the aluminum or vinyl coating because it will crease VERY easily, and so you absolutely CANNOT bend this material without permanently marring the product.You get 2 of these and I had to throw one away due to the learning curve, and even on the 2nd one I have a crease. It's not easy to apply because you cannot stick a corner on and then finagle it. You need to be dead-on and go all in once you begin to push it on the tile, which is very hard to do. You want it "square" and you cannot make a mistake. Get it right the first time.Lastly, I took out their holder which is too small and replaced it with a microphone holder I bought here. See https://www.amazon.com/gp/product/B00347A44I/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1As is obvious from the photo of the mic holder, you pinch the spring and you can put your shower head into this with the shower head directly on top of the mic holder so that the handle and cord hang BELOW the mic holder. You have to disassemble their product and reassemble it with a bit of customizing to get the mic holder to fit inside perfectly, but you'll figure it out.I spent a lot of time looking at the details of shower head holders so that I could create the modified holder with the mic holder. Most holders hold the shower head at the very bottom of the handle which is a huge fail in design.
Rickety
2025-07-11 18:07:37
Double sticky on the back made for easy installation on my tile shower stall.One drawback was my shower head was larger than the holder so I needed toFile the holder A. Little to make the shower head fit.Otherwise.. A GREAT PRODUCT.
CSS19
2025-04-29 15:42:10
Very strong adhesive. It won't budge.
ralph diaz
2025-04-09 16:20:21
I really wasn't satisfied with the product. It's not what they illustrate: crude work with the bent handles, the hose handle is not the one in the illustration (it's an unpolished and raw piece of metal), what looks like a solid metal base is actually a very thin aluminum foil. Generally speaking, I don't recommend it yet for the price of 2 units. And I concur with 2-3 opinions: for what they are really worth, shipping is more expensive. I'll put up with it for that. 😫
Customer
2025-04-08 10:34:03
Bought this2 pack to replace a 3 yr old holder that broke. Unfortunately, the first one only lasted 6 weeks before the adhesive failed on the hook, leaving the plastic plate still on shower wall. Hopefully the second one will last longer. These do work great. Look a bit cheap, but that’s what they are.
TinaE
2025-03-31 21:51:05
They stay where you put them. No hard install. I waited 12 hours before using.
Emy
2025-02-28 20:54:33
J ai bien suivi les instructions, surface propre, poser et j ai attendu non pas 12 mais 24h avant d accrocher quoi que ce soit dessus et croyais moi ça fonctionne.J y accroche mon pommeau de douche mais aussi un support avec mes bouteilles de shampoings posées dedans et bien le tout tient fermement.Produit génial car pas de perçage dans le carrelage au moins!j enleve juste une étoile car il est noté lot de 2 mais je n en ai eu qu 1 c est tout.
Matthew taylor
2025-02-03 11:57:28
Utter tosh. Looked like a screw on the wall with a metal back from the picture. Was a stick on fall off piece instead. The glue on the sticker has Chinese writing on and couldn't hold the bracket up without a shower head in it. Amazon wont refund either. Deleted Amazon over a 12 pound item worst customer service I've ever had the displeasure of using. Binned as they are being awkward about sending me a return label as I dont own a printer.
Paul
2025-02-02 15:05:17
Stayed up for about 30 days then fell off. Surface was cleaned with alcohol, it was dry and free of any debris. Wouldn't order again
Nest
2024-12-07 09:25:46
I decided to try this shower head holder as I cannot use a drill ( especially not in tiles !!) and I’m fed up with the suction cup holders constantly falling off the wall.This is a lovely looking shower head holder ; it has a nice brushed silver colour , it’s very light but feels sturdy .Standard shower head fits in it, no problems .Easy to adjust with a Phillips screwdriver.I am going to leave it for min 12 hours before use ( as per seller instructions) to ensure maximum adherence.The only thing I did not like is the bracket that holds the shower head could be positioned more further from the back ( bit that sticks to the wall ) ; I am unable to use my favourite shower head, which is straight, as it sits practically vertical and water goes outside the bath and soaks the bathroom . I wish I could point my straight shower head down more …But I will be using my “bent†or “ bowed “ , if you like , spare shower head until I find a better one compatible with my new shower head holder .Let’s hope it stays on the wall and won’t fall off !!
Giuseppe
2024-12-01 15:17:18
Deludente la finta lastra di alluminio su cui si regge. Su piastrelle non perfettamente lisce non è bello da vedere.
Recommended Products
