Your cart is empty.
Your cart is empty.Aftermarket 10 piece chrome switch cap set compatible for Harley '96-'13 FLHT, FLHTC, FLHX and FLTRX and '10-'11 FLHXXX models; '02-later VRSC, '96-'13 XL and XR, '96-'11 Dyna, '96-'13 FLHR and '98-'01 FLHRC models
SuperD
2025-08-30 12:25:51
Great look and finish. For the price.you can't beat these. Fitment is a bit tight. Some of the switches dont rock smoothly as OEM beacuse of this but they still work. Ran into a couple issues after install. The starter switch was just slightly stuck after putting it back together and one the on off switch was flipped the bike immediately would start. Took me a while to figure out the button was being slightly depressed causing this. Was pulling my hair out trying to figure out why. The horn side did the same thing so I shaved the inner side of the housing to give more clearance and it fixed it. Other than that, I'm very happy with my purchase.
John&Roe
2025-08-24 12:21:58
Just as good or bad as HD to install. If your heavy handed or don't know what your doing- don't do it. One side of the switch cap has a "star" side on it that actually activates the rocker switch in question. I've done these before and still at times during the install felt like I wasn't going to make it without one of them breaking. So I won't throw BS at you, its a bit of a tedious install and the plastic is screaming to break just before it gets on the rounded end. Once done and after a few times of use they are fine, the horn and starter button spring are fairly easy to reinstall as long as they don't go flying off when you take it apart.
kyle simonsen
2025-07-08 12:10:50
Most buttons did not fit - and the starter button stayed in engaged during a ride came into the start position - fried my starter and have major wiring issues. This a a part I wouldn’t skimp on next time. If I ever get the damn thing going again! They are garbage trust me
Jarrad Wierda
2025-06-22 11:55:52
Item as described, decent fit, had to open the holes slightly to make work, but work great and look even better!
B. Pape
2025-06-19 17:38:26
These look great. But the quality, well, it's not the best. The main problem has to do with the inside diameter of the holes that the switches mount on. Most importantly, the 2 switches that are spring loaded, which are the horn and the starter. The holes are just a hair too small, so the switches hand up and don't return as they should. That's a HUGE problem, especially for the starter switch. I remedied the problem with a Dremel and small bit. Just bored out the hole a little more and that fixed the problem. Otherwise, not bad. BUT BE WARNED!! This is NOT an easy install. Especially the turn signal buttons! Don't even try to take any short cuts. Just dis-assemble your entire switch assembly. There is NO other way to do it. You'll do more damage trying cheat it.
T. Webb
2025-05-12 10:45:27
First of all , you'll need a modest amount of mechanical ability to install these. If you have trouble changing your oil you might wanna leave this up to your dealer. I would give this a higher rating, but quality control seems to be lacking. first set I purchased the round holes were slightly smaller than the factory switch caps. Not a huge deal , I took a drill bit the size of the holes on my existing switch caps and opened the holes up . All went well until I got to the last cap.. that last one broke. I'd suggest getting two sets . I consider myself pretty well mechanically inclined so I'm not convinced the break was an installer issue but rather just a weaker cap in the batch. my second set the holes were spot on and the cap installed perfectly. Tip for those who haven't done this before, boil some water in the microwave. let it cool a bit but still be to hot to leave a finger in it and drop your caps in . pull each one out before you install it, dry it off and snap into place. A warm piece of plastic flexes better than a cold onedespite the one broken cap these looked awesome after installation
tony nunes
2025-04-20 12:59:22
Easy install perfect fit! I love it when people leave bad reviews cause that’s what attracts me to the the product the most. All I can say is lighting fast shipping,great product easy to install and perfect fit on my 09 street glide! Don’t let the trash talk scare you away!
Customer
2025-04-06 17:48:19
One of my old switches fell off while riding so I was looking for a quick replacement and ordered these. I only used the push on switches (vol, ptt, mode and cruze) and they fit perfectly on my 08 Road Glide. Nice tight fit. Did not have to enlarge the holes as other people have said.
Chris Robinson
2025-03-25 10:36:00
Fit perfectly on my 07 Electra Glide Classic
Bobandy
2025-03-24 17:59:56
Chinese trash. The writing is neither engraved or white (as advertised). It's a barely legible dark grey on an already black button cap. Makes about maybe 5% difference from a worn down button cap. Don't buy this garbage, and Amazon shouldn't allow sellers to blatantly lie about their products. 0 stars.
Andrew
2025-01-16 14:00:43
I read the mixed reviews on these and figured I'd try them out. Only to find out they truly do look like they were spray painted silver by a 5 year old. And then they were so brittle the first one I tried to replace broke. I took my time and wasn't forcing it, and the tab snapped right off. Went back to the stock Harley one and had zero issue putting it on. Don't waste your money on these cheap pieces of garbage!
John
2024-12-24 14:03:06
They are NOT white as indicated in picture they are grey and do not stand out. If you are expecting weight do not waste your money and buy. I will say they did fit. They do look better than my old worn-out ones. Just not happy about misleading advertising in pictures. Because of that they get a low rating
Midnight
2024-12-09 17:29:17
Product is okay
Recommended Products
