Your cart is empty.
Your cart is empty.Pack of 8 Bed skirt pins from Clara Clark will hold your dust ruffles/bed skirts perfectly in place so it wont shift when you move your mattress or change your bed sheets. It can also be used to shorten your bed skirt to fit a shorter box spring by pinning them higher up to the box spring
Albuquerque Annie
2025-08-14 11:45:27
These are great for holding in place a wraparound dust ruffle! I prefer this straight pin with flat plastic base to the curled pins you must twist in. These are much easier to use and not as hard on your fingers.I have a TempurPedic mattress and base which weigh a ton! Trying to keep a dust ruffle in place while rotating the mattress is impossible so I went to a wraparound dust ruffle.These skirt pins are fantastic! At some points I ran into the wooden portions of the base so I just pushed the pins in at a backward angle. The bed skirt is securely anchored and not going anyplace! And these pins are easy to remove and re-insert.
Shari Farrar
2025-06-14 16:38:50
We have a king-size bed that is actually two twin beds because they have machinery under them to operate the head/foot and a vibration option. As a result, even though we use a king-size comforter, we have to use twin sheets and bed skirts. What works best is a bed skirt that attaches only at the sides of the bed rather than going completely under it. These bed skirt pins have made all the difference in the world in keeping them straight and tidy. Even if you don't have a mechanical bed, I highly recommend these clever fix-its. They mitigate all the messing you do to the skirt when you make the bed. Just push them in and they keep your skirt hanging perfectly!
R Gail Gr
2025-05-24 11:38:06
They don't stay in. I have an 18 inch mattress and I need to attach to the box spring. I will have to use my heavy duty stapler in order to attach the bed skirt.
Customer
2025-05-10 14:48:42
These are good looking, and effective, but only temporarily so. The first time I changed the sheets, almost every one of these popped up when I pulled the fitted sheet off. You need something that can't just pull straight out, like the bed skirt pins that are corkscrew-shaped. I had those before and will be purchasing again, as that concept is much more effective in the long-term than these straight pins.
VixLyss
2025-04-11 14:53:19
This was one of the worst purchases I have ever made. When I first put them on I thought everything would be fine, but when I tried to slide my big King size mattress back into place they shifted out and under the mattress, either becoming bent at the pins or getting stuck under the bed. The ripped the bed skirt and didn't even keep it at all in place. Now, instead of an uneven bed skirt, I have no bed skirt. I hate this product.
lalaw
2025-02-19 11:51:39
Mother uses on her bed for years. Replacing for her because they get bent after awhileBought her these because she uses everyday.Recommend.
Pat
2025-02-16 15:20:45
I have bought several sets of these. I use them to hold sheets tight on my memory foam mattress. None of the conventional mattress products work well on the memory foam, these do great. They do not harm the mattress and are easy to adjust as the sheet stretches, keeping it snug right up to the day you change sheets.My daughter uses them for her kids top bunk mattresses. They are so hard to make in the first place that it is nice not to have to redo the bottom sheet every day.
P. M. CRUZ
2025-01-29 15:57:42
The bed skirt pins hold the skirt and keep it from slipping and dragging on the floor. I purchased a new mattress and box spring and it was a bit smaller than the old one. The bed skirt came too long and I found myself tripping on it!! So, the addition of the pins, keeping the skirt at the proper depth to the floor, was just the answer!!! Great product. Thanks.
Katie
2025-01-18 17:34:44
I use these to keep the bed skirt in place between the mattress and foundation.Easy to use....just lay bed skirt in place and use these pins around the edge to keep it in place when putting the mattress back on.
iemma23
2025-01-01 14:18:29
The idea is good but the pins are too long and no stronger than sewing strait pins. They bend and twist and do not have the strength to go into the box spring. A total waste of $14 for these 8 pins! We completed the job by using a construction stapler and now the bed skirt is secure!
linda
2024-11-30 11:17:44
liked the pins , they hold on perfect !!!
Gallie
2024-11-29 10:21:41
I am not happy with these pins the bend too easily when I try to use them would have been better off just buying thumbtacks .
Customer
2024-11-28 19:39:03
I find they fall out some times when changing the bed.
Recommended Products
