Your cart is empty.
Your cart is empty.Product Description
JayZ
2025-09-07 19:41:49
The cutter is really nice addition and it does a great job. Bambu printers have a little bit of a different size tube so this was perfect and I was able to replace all the lines in my AMS, the ones going out of the AMS to the junction and into the head, and then also make little PFTE tube savers that go into the AMS Feeders.You get enough tube to be able to do the job twice or do 2 complete machines. I have X1 carbons for reference.
KShoe
2025-09-03 14:53:59
This PTFE tube works great with my Bambu X1C. I needed some extra length to place my AMS in a different location, and this tube was perfect. The included cutter made clean cuts easily.
Robert M.
2025-08-11 10:51:28
Used them to put my AMS lite on top of my new enclosure and they worked great. No issues, quality material and I was able to do all four with one purchase.
Nick
2025-07-13 16:54:27
Nice bundle of PTFE tubing, roughly cut, and measuring approximately 5.2m. The included cutting tool isn't that great, but there's more than enough tubing that you can try as many times as needed to get a perpendicular face on each end.I cut this into five equal 1m pieces for my Prusa MK4 (w/MMU3) 3d printer. Compared to 2.0 ID tubing, that tiny bit of extra diameter helps reduce friction, and makes it easier to swap filaments that may have a slightly-wider tip after being retracted from the hot end.
VermisIIDX
2025-06-11 17:09:11
Works perfectly with my Bambu Labs A1! No issues so far and the included slicer worked flawlessly.
Speedyg
2025-05-27 10:21:15
The tubes fit fine for the AMS lite connection but they slide out of the adapter that goes into the hot end. I will likely keep because I already cut the lengths and I need the cutter. Very disappointed that they don’t work. I now have to wait for the shipment from Bambu. They were the same price on Bambu. I just needed them faster. Unfortunately now the wait time is even worse.
Michael P.
2025-04-22 15:28:52
Product works fine
Josh Greco
2025-02-08 14:11:40
I needed a longer length of tube so I could put my AMS on a shelf above my X1C. This tube works perfectly. The cutter is easy to use. There’s not much else to say, really.
Recommended Products