Your cart is empty.
Your cart is empty."Rough Rock Split Faced Granite" edge liner creates a split-faced granite detail to the finished concrete edge. Molded off genuine pieces of quarried mountain granite. Create a rock edge on concrete countertops, pools, steps, etc. Made of extremely durable polyurethane that can flex and stay strong. Can be used in pre-cast or poured in place concrete work. Cut to length easily with a utility knife or chop saw. Join cut pieces using silicone. Fast and easy to place in a mold, and quick to clean after use. Good for hundreds of uses- Actually gets better with each use as they season. For best results use a concrete form release (NOT DIESEL FUEL) on the rubber liners before each use. Lengths: 1.5" High is 91" Long. 2" High is 95" Long. 3" High is 89.5" Long. 4" High is 90.75" Long. 7.25" High is 88" Long. The ends can be cut with razor blade or chop saw and seam together with a little silicone or clay for seamless runs.
Deal Smith
August 20, 2025
Worked great to put a new face on my steps that were falling apart.
Brian Scholz
June 24, 2025
Works exactly as expected. Thanks!
Bill Rigney
June 16, 2025
Removed gas grill from brickwork, cut off grill and burner and kept bottom portion . Built steel stand to hold concrete bottom , back , and sides I cast . Gonna put Blackstone griddle there when I get done . The Chiseled Edge Form worked good but hard to get all the air bubbles out !
mike
April 27, 2025
Works exactly as you want it to , very realistic look..
Ed Griffin
February 4, 2025
Works good ..
Ashley Leas
December 7, 2024
Used the live edge form to create the water fall levels and it worked great, able to make any shape needed or wanted! Remember to use wire in your forms and spray the form (I used wd40) for easy release. Rinse and repeat!
Recommended Products
