Brian A. ONeill
August 19, 2025
Rock solid, easy to use, easy to install and works as advertised. Don’t go cheap and trust a lessor chock to secure your motorbike.
HDJoker
August 15, 2025
Excellent product . Can’t say enough. Very well made. Using this on my HF motorcycle lift table. Makes life easy loading and unloading my bike.
Richard Bruce
August 13, 2025
They sure know how to make them! This can be easily removed with the pull of pins for front-end work and the front can also be removed! Adjustable for any tire size! Just the best and heavy duty.
charles chaney
August 9, 2025
The only thing I did not like are the quick mounts that come with it for quick install/removal. They used thumb screws to mount them to the mounting plates. Being that I had a 3000 plus mile trip pulling the bike trailer blind behind my fifth wheel camper over rough interstates and two lane curvy roads I didn’t trust them so I mounted the carrier directly to the floor of the trailer using 4 grade 8 bolts. The bike chock works better than expected once you adjust it properly using the instructions for proper wheel fitment. Just pull the bike up in the carrier, and get off. It holds the bike firmly giving me plenty of time to strap it down. I used the new Tank straps I purchased along with it, and I had no issues whatsoever.
Derek White
August 4, 2025
Holy smokes this thing rocks. I had a standard Pingel chock installed in a 6 X 12 Wells Cargo trailer I bought, but after doing a little research I felt that this chock would be much better because it would allow me to easily tie-down my motorcycle by myself--without having someone else hold it upright while I installed the tie-downs. I couldn't be happier. This works exactly as advertised and it was really easy to install. Four bolts through the floor holds it tight. You adjust the rocker to fit your bike tire by moving a quick-release (cotter pin) to the correct position then drive your bike onto it. It immediately "locks" your front wheel into place using the bike's weight. Once "locked", you can get off your bike while the chock holds it in a stable upright position. Tie-downs are still needed to truly secure your bike, but the combination of this chock and good tie-downs will hold your bike rock-solid. So cool and worth every penny. I actually ordered a $500 camera system to keep an eye on my bike while it's in the trailer--but seeing how solid my system now is, I'm going to send it back. Awesome!
Chad groat
July 17, 2025
very well built love that you can ride in and step off to strap your bike down without it tipping over
Kohl F.
July 10, 2025
Easy to install, easy to adjust and once you front tire is in this thing you could get away with two straps. I am very pleased with the quality and craftsmanship. I thought I overpaid, but was in a bind. When it showed up and I inboxes it, I then realized it was price fair for how heavy duty it is.
Bob K.
July 3, 2025
Had a couple of simple wheel chocks in my trailer before and on a long trip over some rough sections of I90 in Idaho the bouncing caused the straps to dislodge and the bike tipped. After researching numerous wheel chocks and relying on their reviews I ordered the SC-2000. I wanted a system that allowed me to load and unload the bike by myself. I installed it in the trailer and set it up according to the instructions for my tire size. I then rolled the bike in and got off the bike without the kickstand. It stood up just as they said it would. I tried to purposely tip the bike and the stand held. In fact it holds so good that I could not get it out of the stand. I'm not the weakest guy around and my bike, a Harley Streetbob, is not that heavy but I could not rock it out by myself. However, there's a simple fix. Cut a piece of 2x4 into a wedge about 16 to 18 long. Go from 1/4 inch to about 2 3/4 inch. Wedge that between the front tire and the chock and as you rock the bike back it will drop down allowing you to release the bike. After installing I trailered the bike over 300 miles and it performs excellent and you don't need to cinch the straps down as hard as you do with others. Would not hesitate to buy another if I were to trailer more than 1 bike.
Stephane
June 17, 2025
The motorcycle is safe and secure in the wheel choke. You can then easily tight your bike. 4 nuts to remove the wheel choke if not needed. Very good setup.
Eric O.
June 1, 2025
Rugged, well built and works exactly as expected. Bolt it down, adjust it for your bike and don't look back. This thing's the 'Bomb'. You will not be disappointed and the higher cost disappears once you see it and then see it in action. My bike is going nowhere with this thing holding it in place.
Brian Lekei
May 11, 2025
I am amazed how well it holds on. Bumpy, heaved highway, tie downs loose and bike totally upright and secure.
Dewain K.
January 24, 2025
The condor wheel chock is hands down, the most reliable and sturdiest wheel chock on the market at this time. Roll the bike in and the bike is essentially locked in place till your ready to roll it out. No wobble, no lean, nice and clean
Customer
November 13, 2024
Exactly as described. Great, sturdy wheel chock. Bought it to hold my Triumph Tiger 1200 XCA and TBird 1600. Just returned from a month long trip and had no issues, don’t expect to see any in the future. Quality product. Worth paying the money and getting it right from the start!