Your cart is empty.
Your cart is empty.The 3/16" x 1" 8-10 Yellow Plastic Ribbed Anchor is an ideal solution for fastening objects to drywall, hollow wall, and block. These plastic ribbed anchors are intended for light duty applications, such as attaching a small shelf or towel bar to the wall.
J. Mccourt
2025-09-03 15:18:45
Perfect for what I needed, fits the screws and for the most part holds its shape when you lightly tap it into the wall / door / etc that you're trying to use them in. If you get it a little cattywonkers, though, it does have a tendency to bend and become unusable. I probably do that ever 4th or 5th try.
Mark A
2025-08-26 14:03:03
Like some other people have mentioned, I didn't buy these for the their intended purpose. I used them as dry caps to adjust my Rimfire trigger. They performed well.
Robert Higgins
2025-05-27 15:37:59
As expected
R. Smith
2025-05-03 16:23:29
Bought these to be able to dry-fire 22 .LR semi auto pistols. These load in a magazine just like a live round, will chamber like a live round, and will give your firing ping something to do besides damage the inside of your gun. You can rotate the "cartridge" around 90 degrees and get 4 "shots" off each anchor. After that the anchor will be deformed enough that you'll want to switch to the next one. I have a hard time getting them to back out of the chamber at times, but you just poke something down the barrel and they back out just fine.
Rich&Lisa
2025-03-03 19:22:17
My son gets about 30 dry fires on his bolt action.22 LR out of these. They do not feed from the magazine though. Great sir snapping in practice.
Ak
2025-02-23 14:26:13
Basic item, not much to go wrong here.
Joe
2024-12-18 14:04:22
These anchors do not fit in a 3/16†hole. After I drilled a 3/16†hole when I tried to hammer in the anchor it would deform. The anchors are to large for a 3/16†hole.
Kristen Mathis
2024-11-20 11:35:23
No longer has enough material to function as 22 snap caps.
Recommended Products
