Your cart is empty.
Your cart is empty.Product Description
Bellopheron
2025-09-03 15:52:09
After beginning the 3d printing hobby with some cheaper machines, (the kind that need much more tinkering and maintenance I am please that this just works and works well. With a little review of the manual, a complete novice should be able to make good-to-great prints. As they get into it. the machine is advanced enough to allow tinkering with the settings, upgrade some features, and change the software, if they want to do that.Or not. Like I write, the machine is pretty much plug and play and has been problem-free over the past 4 months, rather unusual for a core XY printer.
Janelle Noble
2025-09-02 12:26:55
Christmas gift for my grandsons. The one delivered for the holiday did not work…no power when plugged in. Replaced by Amazon fairly quickly with one that works seemlessly and my grandsons are having lots of fun with it.
Angeltrumpetlover
2025-08-30 17:07:57
I purchased this printer in early October on deep sale. It has become known as the metaphorical worker that gets paid to look pretty, while all the other printers work circles around it. It is mostly always broken or clogged.This printer is intentionally hobbled by the maker unless you buy a monthly service or 3rd party control is needed however, there is no support for this device like the other K1 printers. The search for why leads to a strange question of who made this printer and from what parts, am beyond frustrated with this machine and have attempted to troubleshoot it SO MANY TIMES. I've tried to return it or find support.
Brooke
2025-08-16 12:21:23
My 10yo daughter and I are learning 3D printing together through research and trial & error. The Creality cloud is awesome and we have printed some great fidgets. Today she created her own design on tinkered and we were able to print it. I’m not sure who is prouder her or I.
cory shriner
2025-08-10 10:58:25
Easy setup and easy to use
Ben
2025-08-05 10:01:19
Took a little bit of work for get it running as there were some loose connections to the control boards from the factory. Great printer with no issues since then. Have printed in all types of PLA and PETG with no problems
Jeff
2025-08-02 20:07:31
Easiest printer I’ve ever setup. Takes about 10 minutes total. Super fast print times and the software is simple as well.
Sabine M.
2025-08-01 12:38:52
Product seems well built. Can not use it where it seems to have a bad power supply on the unit. Power works at wall, fuse on unit is good. Does not power up. Extremely disappointed in this…
Danilo Silva de oliveira
2025-07-31 16:25:56
The media could not be loaded.
Aurora Cid
2025-07-22 16:09:21
Funciona muy bien
Italo Giovanni Brizio
2025-07-20 17:30:47
The media could not be loaded.
Ricardo Hideki Nochiyma
2025-07-16 16:40:29
Produto veio em ótimo estado, foi muito fácil montar e o aplicativo já vem com algumas pré-definições configuradas, basta procurar o modelo da impressora na listagem. Para o filamento de amostra que vem junto, recomendo utilizar a temperatura do Bico em 215°C e a da Mesa em 70°C para não ter erros e perder material. Lembrando que é essencial um bom ajuste de nivelamento da mesa para melhor qualidade e aderência da primeira camada.
Mirotu70
2025-07-12 12:54:44
Buen producto para empezar a imprimir 3D. Buen soporte tecnico.
Bellopheron
2025-07-05 13:37:06
After beginning the 3d printing hobby with some cheaper machines, (the kind that need much more tinkering and maintenance I am please that this just works and works well. With a little review of the manual, a complete novice should be able to make good-to-great prints. As they get into it. the machine is advanced enough to allow tinkering with the settings, upgrade some features, and change the software, if they want to do that.Or not. Like I write, the machine is pretty much plug and play and has been problem-free over the past 4 months, rather unusual for a core XY printer.
Janelle Noble
2025-07-02 14:41:18
Christmas gift for my grandsons. The one delivered for the holiday did not work…no power when plugged in. Replaced by Amazon fairly quickly with one that works seemlessly and my grandsons are having lots of fun with it.
Angeltrumpetlover
2025-06-25 12:30:48
I purchased this printer in early October on deep sale. It has become known as the metaphorical worker that gets paid to look pretty, while all the other printers work circles around it. It is mostly always broken or clogged.This printer is intentionally hobbled by the maker unless you buy a monthly service or 3rd party control is needed however, there is no support for this device like the other K1 printers. The search for why leads to a strange question of who made this printer and from what parts, am beyond frustrated with this machine and have attempted to troubleshoot it SO MANY TIMES. I've tried to return it or find support.
Brooke
2025-05-19 13:25:31
My 10yo daughter and I are learning 3D printing together through research and trial & error. The Creality cloud is awesome and we have printed some great fidgets. Today she created her own design on tinkered and we were able to print it. I’m not sure who is prouder her or I.
cory shriner
2025-05-05 17:51:12
Easy setup and easy to use
Ben
2025-04-30 13:22:36
Took a little bit of work for get it running as there were some loose connections to the control boards from the factory. Great printer with no issues since then. Have printed in all types of PLA and PETG with no problems
Jeff
2025-04-09 18:18:30
Easiest printer I’ve ever setup. Takes about 10 minutes total. Super fast print times and the software is simple as well.
Sabine M.
2025-04-07 13:23:47
Product seems well built. Can not use it where it seems to have a bad power supply on the unit. Power works at wall, fuse on unit is good. Does not power up. Extremely disappointed in this…
Danilo Silva de oliveira
2025-03-27 09:52:45
The media could not be loaded.
Aurora Cid
2025-03-22 11:09:26
Funciona muy bien
Italo Giovanni Brizio
2025-03-21 16:12:43
The media could not be loaded.
Ricardo Hideki Nochiyma
2025-03-05 11:03:29
Produto veio em ótimo estado, foi muito fácil montar e o aplicativo já vem com algumas pré-definições configuradas, basta procurar o modelo da impressora na listagem. Para o filamento de amostra que vem junto, recomendo utilizar a temperatura do Bico em 215°C e a da Mesa em 70°C para não ter erros e perder material. Lembrando que é essencial um bom ajuste de nivelamento da mesa para melhor qualidade e aderência da primeira camada.
Mirotu70
2025-02-07 20:00:08
Buen producto para empezar a imprimir 3D. Buen soporte tecnico.
Recommended Products