Your cart is empty.
Your cart is empty.Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Ford Bronco (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 4,000 lbs. WD and 400 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
Marsea Dewitt
2025-08-20 09:58:53
I got this for my 2023 Bronco. Fit with no mods. Was quick and easy to install and functions like it should.
Benjamin C Bragg
2025-08-09 11:26:14
I'm no trailer hitch aficionado, but this one is super sturdy, easy peasy install, and worked perfectly with my trailer hitch cargo rack. I'd buy it again!
Joe
2025-08-03 15:34:31
So I bought a cheaper one three days ago made in China and got it yesterday and went to put it on and the bolts did not fit. Then the Lock nuts did not fit was not even the right size for the bolt. I was very upset with it and did a return right a way. I then ordered the CURT CLASS 3 TRAILER HITCH, 2 " RECEIVER made in the USA and got it the next morning. OMG let me tell you I loved it the hitch receiver fits perfect and the bolts and lock nuts all worked and fit perfect. The best thing was once you have then all semi tight I take a TORQUE Wrench to the 4 bolts in the back and torque them all to 110 Lb you did not even have to use a wrench hold the special lock nut that comes with this kit. It tightens as you tighten the bolts in the back it was great and very easy to install. I recommend everyone to buy a CURT hitch receiver when needed that is what I will do in the future.
Daniel Racine
2025-07-27 10:12:46
Fit perfectly on the Bronco. I didn’t have to remove the bumper. You just need to take your time.
Carlos Segarra
2025-06-19 17:27:13
Just bought a new 2024 Bronco to flat tow behind my RV. Installed curt Flat tow base plates, trailer receiver and all associated wiring without drama. Everything fit well and was pretty straight forward for installation. Saved hundreds in labor charges.
Mike
2025-06-06 14:06:31
Haven’t towed with it but the welds look superb and it’s a solid unit. Installation on my 2021 Bronco wasn’t bad. Screws are almost too long. So you have to get with rough with it getting some of the screws to go through but they will go.
Brandubo
2025-05-21 10:24:47
Perfect fit and easy to install on my ‘23 Bronco. Just remember if you don’t have an existing wiring harness, that is a moderately complex task including interior panel removal and running wiring underneath along the frame and up to the battery. I had ford do that as it wasn’t worth my time. Also a drop hitch is needed for the trailer tongue lock to clear the spare tire if it’s the flip up to unlock design.
David Brooks
2025-05-12 12:48:08
Exactly as advertised. Excellent quality. Couldn’t be happier with purchase
Simon R.
2025-05-05 16:40:58
Very sturdy, everything 1/4 inch thick, better than the OEM 3/16 thick
Gurvinder Virk
2025-03-21 15:47:28
Easy to install and perfectly color-matched to the Bronco. Solid build.
66custom
2025-03-07 12:29:02
Easy installation with good instructions, takes about 2hrs for full install. The wiring takes the longest amount of time running the cable to the front on the frame.The zip ties supplied are not quite large enough to be useful wheen attaching to the frame, I used larger ties I had on hand and all went well with those.
Dej
2025-01-12 19:20:12
Waiting 6 months on fords back order, got this 3 days from the date of order. Great quality and easy install.
Jack
2024-12-30 16:19:28
So far great product.
Recommended Products
$203.24
$ 86 .99 $86.99
$273.49
$ 99 .00 $99.00
$212.98
$ 99 .00 $99.00