Your cart is empty.
Your cart is empty.Product Description
Lashing Rings D Ring Tie Down Ring
Notes:
Please kindly check the size measurement carefully before you purchase
Features:
-Type: Lashing Ring
-Material: Zinc-plated steel
-Color: Black
-Diameter: as image
-This item has an incredible assembly 2400 Pounds Capacity
-The D tie-down anchors are made of heavy duty zinc-plated solid steel, protected by zinc-plated to prevent corrosion and rust
-Wide application: Anchor all logistic tie-down ratchet and cam buckle straps, ropes, hooks, and chains to secure cargo of all sizes and weights
Package:
10 X Tie Down D Rings
20 X Screws
better quality
tie down rings made of exceptionally heavy duty zinc-plated solid steel, protected by zinc-plated to prevent corrosion and rust.
Easy Installation
By threading a screw or bolt through the 1/4" diameter bolting hole on the mounting clip and securing to any wood or metal surface.
Wide Application
Anchor all logistic tie-down ratchet and cam buckle straps, ropes, hooks, and chains to secure cargo of all sizes and weights - bikes, ATVs, UTVs, quads, motorcycles, furniture, camping equipment, delivery boxes, appliances, heavy machinery and power tools, and other loads.
Bruce Aungst
2025-08-10 14:39:02
These tie down's or "D" rings, as they are often called, help secure light loads. I like the finish on the rings and their securing base plates. Compared to many I have purchased over the years, these are of better quality than most.Keep in mind, these are for light loads only. I would suggest through bolting the mounting plates and using either washers or some other backing plate system on the bottom side of the hardware mounting location, as the supplied wood screws will have limited holding capacity and depending upon the material where mounted, would likely be the weak point of the mount.For the price, these are some of the better light weight tie down points I have purchased over the years. They are handy to place on a trailer, etc. to provide additional load securing. Don't overload these tie downs and make sure to check the hardware over time as they are used.Respect the limits of these tie down points and they are a useful addition to other securing methods. The price and quality of these make them an excellent value, just use them as designed and rated and you will find them a helpful addition.I use these as temporary tie down points and position them where most effective. If you are using these for securing a load, you may consider through bolting these tie down points and even using reinforcement on the back side of the surface to which they are secured. The wood screws which come with these rings are adequate for small, lighter weight loads. If the loads are going to be near the tie down's rated load capacity, you should consider using a through the surface hardware with either a backing plate or washers on the bottom side of the hardware to help secure the rings.
Scott Morgan
2025-07-25 16:41:06
Needed something to secure our patio furniture to the balcony. These little things are super sturdy and easy to install. I have no concern about them holding up. Strongly recommended.
Kindle Customer
2025-07-02 12:38:11
I bought these to install under my eaves on our front porch. We use a short length of chain to hang heavy potted ferns that consume a lot of water. They’re vey strong.
bhucker
2025-06-22 14:28:44
These anchors seem fine for my use, which is tying down a tarp over boxes and other articles in the truck bed for long trips. I've seen complaints about the screws in other reviews, but these screws worked well for me, except for two locations where the screws were not quite long enough to span a gap between my plastic bed liner and the metal bed. To install these, I drilled pilot holes with a bit that is narrower than the screws -- maybe 7/64". Then I put the screws through the bed liner and into the bed.One drawback I had not considered for these and other anchors is that they could be noisy. The thickness of the D-rings is less than the gap in the brackets, so the rings would rattle around if installed as shipped. I cut a piece of rubber tubing into small lengths that fit the straight sides of the D-rings. Then I slit the tubing so it would fit over the ring and screwed in the brackets with the tubing in place. This makes the D-ring snug so it won't rattle, but still movable for tying things to it.
jason holcomb
2025-06-19 09:54:57
Works great for my net tailgate
T. Schaefer
2025-06-17 13:59:45
The screws aren't for metal, after I had one break on me, I started welding these on. They weld on easy and are super strong. Excellent value.
Paul Majuri
2025-04-20 18:16:41
Coated well , closed ends, large hole for mounting, good price.
jabef
2025-03-05 15:53:51
These anchors are great. They are exactly what I needed for my Jeep.
Jose Garcia
2025-03-04 15:36:34
se necesita herramienta para instalar, pero una vez instalado son sólidos como roca.
RON SCOTT
2025-01-14 18:25:52
I used these for dog leash attachments to my trailer to keep our small dogs leashes
Bernard Egan
2024-12-26 18:53:34
Decent Quality and very robust, a great choice .
Recommended Products