Your cart is empty.
Your cart is empty.Tired of slipping every time you get off the ski lift Keep your boot firmly planted to your snowboard with the Dakine Spike Stomp Pad. It has taller spikes to keep your foot in place, even with lots of snow buildup, and it can be cut apart and reconfigured in any pattern you like.
Tweakes182
2025-09-03 21:35:30
A great stomp pad, especially for kids. Lots and lots of grip. You can get a lot of snow on it and it is still effective.
Jonblaze08
2025-08-16 13:42:30
If you need a great stomp pad that looks rugged and grips well this is the one. The installation was easy and is now holding as of 3 days on the mountain. Still looks brand new thus far. No signs of the adhesive letting up. Follow the installation instructions included and you will be happy with the final result.
SPEEDYSHEED
2025-08-10 16:30:25
This is the only stomp pad I have used in over 20 years of me using stomp pads and this is the only one Ill be using. Just a great all around pad with good durability. Previous stomp pad lasted about 15 years before I retired the board! Dakine products have treated me well over the years and I will continue using them!
evan
2025-07-27 11:02:16
I almost didn't purchase this item because of all the reviews saying this doesn't stick well; I'm glad I took a chance. Product arrived on time. Followed the directions and this thing stuck like cement! I decided to cut mine into strips so I had a larger foot print area and it still worked great. I've been out 4 times abusing my board, some of the days being cold in the single digits, and this pad is solid! Also, the larger spikes gives excellent grip even if there's some snow build-up on the board. How I installed: -made sure my board and pad were room temp by leaving inside overnight. -cleaned the board surface with rubbing alcohol and let dry.* *Pro Tip: if the top of your deck is high gloss, before the alcohol, try using a scotch pad or light abrasive to carefully and gently scuff the surface only where your pad will contact* * -used a blow drier on hot setting and warmed the board surface and sticky side of the pad for 2-3 min. -peeled the clear plastic from bottom of pad to expose the adhesive and stuck it onto the board. -I set a couple soft cover books on top of the pad and a 25 pound weight on top of that and let it sit for a day. When all was said and done I tried to see if it would peel off but it wasn't going anywhere.Hope this helps, enjoy!
Dr. BC
2025-07-08 17:55:00
Probably would give this a five-star but if you're like me and like to filter by four-star reviews then this is for you. This does a perfectly decent job and is well worth the money. The spikes are much deeper and harder than I was anticipating. Also, the pad itself is not completely flat but shaped like a shallow "U" so the nose and tail board side edges are a bit taller than the toe and heel foot edges. I'm glad I read the reviews about removing the plastic sticker backing before heating and applying to the board cuz that would've been tough to spot with the naked eye.
Kirstyn Hollifield
2025-04-16 13:02:33
The media could not be loaded.
AM
2025-04-14 14:24:45
Works great, provides a lot of grip even when packed with snow.
Lydia
2025-04-07 17:35:35
Best stomp pad I’ve ever had and I’ve been snowboarding for 20 years now. Love it!
Boris Anthony
2025-04-03 12:53:22
The peel-off backing on this stomp pad is a thin transparent plastic sheet. If you are not careful, or if the adhesive has bonded with the backing (for example the shop had it in storage somewhere warm maybe), the adhesive will come off the pad with the backing, basically rendering the pad useless (unless you use your own glue…)Basically, follow the instructions and warm everything up, but be aware that there is a very very thin plastic (why, Dakine?) backing. If what you are peeling is thick, stop; you are peeling off the adhesive.
Sandy
2025-03-02 18:44:14
Fonctionne hyper bien et il est très solide. J’ai installer 5 min avant de partir en snow.
Kenishyro
2025-02-26 11:38:25
Très déçu du produit, celui-ci n'est pas prévu pour être séparer en plusieurs parties pour être placé sur la planche. Si c'est le cas. C'est très mal conçu...les séparations sont tellement épaisse que la découpe est ne peut pas ce faire proprement...dans mon cas le ruban adhésif s'est carrément détaché puis devenu inutilisable....bref un cauchemar...Si vous voulez l'utiliser en séparé fuyez ce produit...
Mr S J Fearns
2025-02-09 15:36:58
Sticks strongly to the board and is just the right size to clean your boot or to give you some grip when your back foot is out of the bindings on the lift
ts
2025-02-03 16:57:33
guter Halt und klebt gut auf dem Brett. Ich hatte bei der Montage mit Waschbenzin vorgereinigt, dann mit Föhn beide Seiten aufgewärmt und dann einen Tag mit Schraubzwingen stehen lassen.
Recommended Products