Your cart is empty.
Your cart is empty.Product Description
Our product pictures are all taken by ourselves, which truly show the quality and characteristics of the products, so you can buy without worry
Features
- High-Quality Flex Fuel Sensor
- OE Number:12570260 10371025
- Suitable For Chevy Silverado 1500 GMC Sierra 1500 And So On
- Package List: Flex Fuel Composition Sensor x 1pc
- Material: High quality Stainless Steel
- Breathable PTFE membrane can increase air circulation,Save Your Oil Fee
- One-piece Laser Welded Body,Maintaining Sensor Integrity
- Stainless Steel Shield And Dual Internal Talc Seal,Not Easy To Be Corroded And Deformed, Long Service Life
Chevy
- Chevy Silverado 1500 2002-2005
- Chevy Silverado 1500 Classic 2007
- Chevy Avalanche 1500 2005
- Chevy S10 Pickup 2000-2003
- Chevy Suburban 1500 2002-2005
- Chevy Tahoe 1500 2002-2005
GMC
- GMC Sierra 1500 2002-2005
- GMC Sierra 1500 Classic 2007
- GMC Sonoma 2000-2003
- GMC Yukon 2002-2005
- GMC Yukon XL 1500 2002-2005
Question: Can this sensor fit a 2001 chevy s10
Answer: Yes, worked on my 2001 S-10
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Question: Will it work for 03 Chevy Tahoe z71
Answer: It worked 2003 Chevy Tahoe LT. 5.3 motor.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Question: Where can i find the flex fuel sensor on a 2001 gmc sonoma sls
Answer: Along the driver side frame rail near the fuel filter
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Question: Will this fit a 2002 Suburban with 5.3 regular gas? Or replace part #Se1001s
Answer: This product fits Chevy Suburban 1500 2002,Pls check your vehicle model
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Question: Is there a mounting thread for this Flex Fuel Sensor?
Answer: No, it has no thread, but it does not affect the normal installation and use.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
A. krrizal
2025-08-27 14:58:38
My tahoe did not pass inspection this jan 2025 because of this issue with check engine tab on the the dashboard. The issue was the standard flex fuel sensor according to print out of the inspection. Only 2 weeks I had to fix this issue. I was in search at different Autoparts stores which had prices over $300. I needed a solution which at the moment couldn't waste alot$. I was worried to purchase it here in amazon b/c of the cost Being low. I read reviews which the majority had good ones. I decided to purchase this. I stop having the issue of not being able to start the vehicle and it really work with passing my inspection after 80 miles running it after installing it according to the guy where I went to. To me, it worked. I would recommened.
mechanic81
2025-08-24 13:19:10
My sensor went bad on my 2003 Tahoe and I didn’t feel like spending $386 for the OEM part. It has been a few months now and a few thousand miles since I replaced it and it is still working.
vilma fernandez
2025-08-02 19:24:44
Everything is good, working good
Matt W.
2025-07-24 17:09:07
This was easy to install. You need the GM fuel line tool to disconnect the lines, should come up as a suggested item. Simple 4 bolt removal with a 10mm socket or wrench. Remove the safety clips from the lines, use the tool to release the connectors, big end for the big line small end foe the small line. Wipe hose ends clean with a rag before connecting this new part.This item is NOT threaded like the original, there's just enough of a taper at the end to let the original self tapping bolts bite in, but DO NOT OVERTIGHTEN or you'll strip it out. Crank them in slowly until snug to the bracket and then stop or you'll be screwed. This is a hand-tool only removal and installation.You will have about 1/4 cup of fuel drain out at you so be prepared for that. No electric work lamps or smoking or it could get real interesting for you.I cleared the error code with Torque Lite app and the OBD-Link MX201. Not sure if this code self clears or not. The OBDLink is a good investment regardless.
Greentre
2025-07-13 18:24:05
I bought a used Yukon XL to haul my dogs around in and it had the P0178 code which is this sensor. The original one had bent fuel lines going into it and was packed in dried mud so it was a pain to remove. This was a breeze to install and once I cleared the the DTC there was no more problems. Well worth the price.
Rj
2025-06-26 19:04:06
Easy to install, my Tahoe runs great now with no check engine light. Would definitely buy again
Austin V
2025-04-13 12:08:52
I just purchased this product Saturday got it Monday and installed Tuesday! After the install codes were cleared. Literally one hr later the same PO178 code popped back up
Blake
2025-04-08 15:36:14
So far so good cleared the code (don't forget your quick disconnect tool) 2005 Chevy avalanche Lt I will update if anything changed thanks for the part
سيئ جدا
2025-02-11 11:27:10
Not working No pay this
Recommended Products