Your cart is empty.
Your cart is empty.
Universal 19 pieces hub & bearing puller
Comprehensive set for the removal and installation of front hub bearings
No dismantle of steering assembly needed
Heavy duty steel drifts
Not compatible for 2011 Honda Accord V6 3.5L Including multiple sizes of drifts, and the kit can be used for different models.
PACKAGE INCLUDES:
1 x Steel Drifts: 38mm;
2 x Drift: 86mm, 91mm;
1 x Receiver Sleeve: 76mm;
3 x Hub Screw: M12 x 1.5 mm;
3 x Hub Screw: M14 x 1.5 mm;
9 x Adapter Drift: 55.5mm, 59mm, 62mm, 65mm, 66mm, 71.5mm, 73mm, 78mm, 84mm.
Operation as reference:
1. Please check if the vehicle has a trapped rotor or a floating rotor.
2 .Assemble the tool components,then press out the worn bearing.
3. Lightly oil the new bearing and position it for installation with the tool components assembled. Press the bearing into the spindle assembly until it bottoms.
4. Fasten the bearing retainer in right place by using the bearing retainer bolts. (On Neon vehicles, install the snap ring in the knuckle.)
5. Assemble the tool components. Lightly lubricate the hub assembly, and install the hub.
Noted: The bearing installer must be assembled with the flat side toward the bearing and the small diameter pilot on the side away from the bearing.6. Assemble the remaining vehicle components that were removed for replaces the bearing:
1) lower ball joint to steering knuckle assembly brake rotor.
2) disc brake caliper.
3) outer tie rod nut and tie rod.
4) axle nut.
5) front tires.
If there is any quality problem about the product, please kinldy cntact us.
Henry D Brierly
August 17, 2025
Had a good selection of fittings at a good price and held up well during use.
Ron Moore
July 3, 2025
Other name brand tool dealers don’t have this much product in a box, but what they do have is 600 times more expensive! No joke! Of you do a lot of bearing work on front wheel drive cars, this makes life much easier!
Randall vidhelm
June 25, 2025
You don't need expensive tools to get the job done. This tool set dose the exact same job as the ridiculously over priced tools. Don't be a fool buy this tool
JAMAZON
June 20, 2025
This tool kit worked well enough. It seems heavy duty and durable for years of use. It helped me get the job done. It only removes the wheel bearing and not the hub that's pressed in the bearing. You have to buy or rent that tool.
Eli
June 18, 2025
Material is extrely weak even when using hand wrench material just breaks apart
Sandra
June 6, 2025
It worked great for my 2004 Honda pilot rear wheel bearing.
Rosa
April 6, 2025
My husband was so happy we got to work on our car and were able to do the job
Ronald Davis
April 5, 2025
Works great
Greg Squires
February 26, 2025
All the parts I needed where there, plus many more for different sized bearings. This worked very well and was plenty sturdy. I used it for the front wheel bearings on a 2014 Buick Encore. I took the advise of a YouTube video and put the new bearings and wheel hub in the freezer in order to ease their insertion using the kit. I also used anti-seize grease.
herveguizmo
February 22, 2025
Demande à bien connaitre sa manipulation , très utile et coûte bien moins cher qu'une heure de garagiste .
David J Greville
February 19, 2025
I purchased this to fit wheel bearings to the front of my daughters Renault Clio MK3. It had the necessary size parts to complete the job. It really is a strong tool, I needed to stand on the spanner to get enough strength to press out one of the bearings, it was either going to be the tool breaking or the bearing releasing. But the tool held up remarkably well and I completed the job of doing both sides of the car. The quality of the manufacturing and the carry case is very good. I would have expected to pay far more for this tool. The instructions are a bit vague, but just watch a YouTube video on how to use it(there's loads out there).
Stefan
February 17, 2025
Zugspindel könnte etwas feineres Gewinde haben, sodass man beim Rausziehen nicht mit der Werkbank durch die Nachbarschaft läuft.Aber aufgrund des hohen Kraftaufwandes hat das Werkzeug gehalten was es Verspricht
Cliente
February 8, 2025
Lo usé para meter los rodamientos de un Colt, aunque se podrá meter los de cualquier marca.Muy efectivo, parece de buen material, a mi me ha funcionado.
Recommended Products
$14.99
$ 7 .99 $7.99