Your cart is empty.
Your cart is empty.
This motor is great for those wanting to make their own custom electric vehicle, whether it's a scooter, electric bicycle or something else.
This electric motor with gear reduction produces more low-end torque than your standard motor.
Note: This motor is capable of rotation in either the clockwise or counterclockwise direction by reversing the motor's power wires.
Note on Compatibility: This motor is NOT compatible with the Razor Dirt Quad.
Specifications:
MY106Z2 250W 12V Brush Motor
No-Load Speed: 3850rpm
Rated speed: 3000rpm
Gear Ratio: 9.78:1
Actual speed: 300 rpm
Sprocket: 9 teeth sprocket 410 (use for ordinary bicycle chain)
Sprocket size
Teeth: 9
Pitch: 12.7mm (1/2")
Tooth thickness: 3mm
Inside diameter: 11mm
Outside diameter: 41mm
Rated Current: 13.4 A
No-Load Current: 2.5A.
Jon
2025-08-28 11:27:36
I know it says doesn’t fit on razor dirt quad but I had no problem putting it on mine. I had to angle grind down the original sprocket from the dirt quad since this sprocket was much smaller but you could just buy a new sprocket and skip that step. Besides that the motor ran in reverse so I just reversed the polarity by connecting red to black and black to red. But as far as no compatibility, it worked just fine so who knows what they mean. Motor runs smooth no issue
Neil Corbin
2025-08-17 15:28:41
We use this motor on an automated bottle baler. The first one is still working after 4 years and we are building a second machine now.
Jason
2025-08-12 16:03:45
Bought this to build a DIY wood lathe. As I expected, due to it's intended application as a mini-bike motor, it it has plenty of torque at the sprocket. Not sure if it's mentioned, but there is a key-way on the shaft, if you needed to know. Best thing about this motor is that it is quiet, provided you bolt it to some kind of shock pad or torque absorbing elastomeric mount. Direct mounting will cause minor, but tolerable, vibrations in the frame, resulting in some additional noise. Nothing too serious. Again, great little motor. Plenty of power, quiet, and easily controlled with a standard PWM motor controller. NOTE: I highly recommend a PWM controller, as it is far more precise than current modulation and will give you more usable torque at low speeds.
Hal
2025-07-19 21:56:41
Motor is good. Bracket arrived bent, but I was able to deal with it.
Robert Russell
2025-05-17 18:38:16
Works perfectly. Just what I needed.
Cody Harris
2025-05-04 13:21:47
Worked great for a month or two just to push my daughter on her tricycle but after about the fifth use it stopped working very disappointed cuz she loved it very powerful very well built but for that much money should of lasted longer wasn’t outside or beat on other then that great
Lexie
2024-12-23 11:58:04
24v power supply and a controller. Now my sawmill pulls itself and I just sit back and watch.
Anderson Perez
2024-12-18 10:43:34
Excelente producto muy buena calidad. Funciona perfectamente!! Recomendado
Recommended Products
