Your cart is empty.
Your cart is empty.DW200 series, 255lph in-tank fuel pump with universal install kit. Fits Most. Founded in 2004, DeatschWerks, LLC is a company dedicated to providing application specific, high-performance fuel systems solutions. Located in Oklahoma City, Oklahoma, DW operates out of its own 12, 000 square feet facility that houses all of the company's functions including design/engineering, manufacturing, quality assurance, and administration. DeatschWerks roots were established by offering high flow drop-in fitment fuel injectors for Nissan engines such as the popular SR20DET, VG30DETT, and VQ35DE. Soon thereafter, DW expanded to cover Subaru, Mitsubishi, and other popular sport compact makes. The DeatschWerks line-up of fuel injectors includes over 250 applications and sizes that cover both sport compact and modern muscle applications. In 2010 DeatschWerks entered new territory when they released the DW300-series in-tank fuel pump. Adhering to their philosophy of application specific solutions, the DW301 fuel pump is available with fitment kits for over 30 popular applications. Then in 2011 DW expanded their fuel pump line to include the DW200 and a compact fuel pump solution, the DW65c.
MJ
2025-08-02 17:28:51
Put this in my E46 BMW that kept throwing lean codes and misfiring. Fixed the problem, runs better than it has for years.Literally 2 slits in the OE hanger just big enough for the included fastener, connect the included piece of high pressure fuel hose (I didn’t need to trim it, but easily done if you need to), crimp the wired onto the OE hanger and put it back. Less than an hour start to finish.The ONLY thing I had issue with is the little star thing that is supposed to hold the filter on. Had to fish it out of the fuel tank twice and reattach the filter. It doesn’t fit tightly on the little plastic stud. That connection needs some re-thinking, but otherwise I’m happy with the product and price
Peter Franklin
2025-07-26 09:47:09
I stumbled across this little guy in my search for a repair to a fueling issue on an 86 Volvo 245 I lifted and modified for a Gambler 500.The stock fuel system utilizes two pumps, one inside and one outside of the fuel tank to deliver fuel.My in tank pump had died and the load had been left to the exterior pump.I had my reservations about swapping to a single in tank pump but this thing delivered everything it was advertised to be.I'd say we covered more than 500 miles in our trek and the only fuel system issues I had after installing that was a bunch of 30 year old hoses leaking from the now improved fuel pressure. After a little hose clamp action this pump was the solution I was looking for. It fit right into the stock fuel pump "basket" on the stand with minimal modification.Included hardware and wire pigtail were solid and worth using.Overall very happy with the product. Its one of the few things to survive in working order and will be transferred into my next lifted brick project.
Joseph Halder
2025-07-02 15:54:38
I have a US made 1997 XV20 Camry with a 5SFE that's had a turbo installed. The stock pump definitely won't flow enough. The plastic sending unit can't (easily) be used with this, but the metal sending unit can. I think Japanese made XV20 will include the metal unit. I actually grabbed mine out of a XV20 ES300. Now I'm running E85 through it with no issues for a little over a year. Deatschwerks has arguably improved on the formula that made Walbro so famous. This is quieter, cheaper, and flows more than Walbro, while officially supporting E85.
Robert DIY
2025-06-23 12:24:55
Great pump if you need solid steady pressure and don't mind tearing into the sending unit. When installing the pump I broke off the pump tab that the pump sock is secured to, so be careful of that. I wired the sock on in the orientation I needed so I am good to go. I have purchased a few of these and they are good.
Ramon
2025-06-05 11:11:06
Install was a breeze. pump is like the factory one only smaller so, fit small on sender assembly but causes no functional issues. De-solder old power and ground wires and solder new pump pigtail for factory clean look. Quieter than original ka pump. Noticeable engine power and response increase. A must do upgrade for sr swaps. Highly recommend this pump.
WFO Performance
2025-05-20 18:25:06
This is a great replacement fuel pump for powersports application and it doesn't draw a lot of amperage. I've probably installed about 30 of these over the last few years and never had a problem
Shelby D. Huber
2025-05-09 15:43:58
Great little pump. Not too noisy and will do the job of fueling my LS swapped Volvo 240. As for the customer service from Deatschwerks, wow great people there. My pump sock fell Into the tank and I could not recover it, they send me another sock (smaller one to fit easier) no cost to me.Awesome company.
Danny nale
2025-03-26 10:19:56
replace walbro 255 with DW200 perfect fit.DW has come to make a name for itself.if you're looking for top-of-the-line you found it. can't beat the price. I use the 1000cc injector at 65lbs 10lbs boostFor the dw200 is a easy task and super quite...
Jeff
2025-02-12 18:00:52
This was a direct replacement for my particular Walbro 255. Same height, output size and electrical connection. At 58psi it can be a little noisy with an empty tank but it's not the same obnoxious, grinding drone as the Walbro. It has a higher pitch that isn't annoying with a full tank and not noticeable at all when the car is running. If your system runs at 43psi its almost silent (gets louder as pressure builds).
Lorenzo Esercitato
2025-02-06 11:10:17
Great pump for my 94 turbo Miata. It fit perfectly in the factory location with the stock connector. I had to reuse tho was the old fuel filter sock because the Miata one is angled and the New one provided wouldn't fit in the tank, not a big deal. Extremely pleased about quality and performance. Everything you need is in the kit. Very quiet as well.
Customer
2025-02-04 17:30:21
One thing to note is you have to use the oem sock due to the angle of the tank if you use for a Miata.Car is supercharged on standalone with rx8 injectors.
Ottawa Customer
2025-01-13 11:07:48
Little customizing to do to make it work...looks great...
raide404
2024-12-17 14:41:27
Amazing very high quality would 100% recommend for anyone
Recommended Products
$189.99
$ 88 .99 $88.99