Your cart is empty.
Your cart is empty.Devilbiss StartingLine Topcoat & Priming Spray System Includes 1 Full Size (Basecoat, Clearcoat & Topcoat) HVLP Spray Gun & 1 Full Size (Priming) HVLP Spray Gun plus Accessories Excellent 2 Gun System that's perfect for the Do-It-Yourselfer! Kit Contains: 1 Full Size STARTINGLINE HVLP Gravity Feed Paint Spray Gun with a 1. 3mm (Finish Coat) Fluid Tip & a 600cc (20 oz. ) Metal Cup. This 1. 3mm set-up is ideal for the Atomization of Basecoats, Clear Coats, & other Light Viscosity Coatings. Spray Gun Specifications: 30 PSI inlet pressure delivers 10 PSI air cap pressure at 13 CFM air volume. 1. 5mm (Single Stage) Fluid Tip & Needle Use this 1. 5mm set-up for Single Stage, Primers, Sealers, & other Light to Medium Viscosity Coatings. 1 Full Size STARTINGLINE HVLP Gravity Feed Paint Spray Gun with a 1. 8mm (Priming) Fluid Tip & a 600cc (20 oz. ) Metal Cup This 1. 8mm set-up is ideal for the Atomization of Primers, Sealers, Thinned Latex/Oil Base, & other Medium to Heavy Viscosity Coatings. Spray Gun Specifications: 30 PSI inlet pressure delivers 10 PSI air cap pressure at 13 CFM air volume. Also Includes: Air Regulator with Gauge Gun Cleaning Brush Set Gun Maintenance Wrench Blow-Molded Storage & Carrying Case Includes 1 Year Limited . Spray Gun Rebuild Kits are available
Stephen K.
2025-08-15 12:16:14
Good little set works well, I've painted my 70 barracuda with it and know a few that painted their classics with the same set as well... definitely recommend for a lower end set that isn't on the super janky cheap side... if you do want to use their pps system verify that you get the right adapter, amazon normally recommends the wrong one
Roy my boy
2025-08-11 13:28:15
These guns have a nice feel. I have always had good results with DeVilbiss. Good quality in a affordable price. Good guns for the DIY guy.
John Yearwood
2025-07-08 15:21:45
Good products, good service and fast
Scott
2025-07-06 09:55:06
The 4 stars are simply due to the price, what you get and especially what was expected (I had low expectations). I mainly got this for gunning primer and it did fairly well. The spray pattern was a little inconsistent, but that's why I got it for primer...it can be sanded during prep. Use caution with the cups! My first mix of primer resulted in the metal cup breaking at the fitting and dumping paint everywhere. Thankfully I wasn't over the parts when it happened. I only used one of the guns and had it on a commercial compressor; however, inline pressure for a good spray was about 26psi (it was also cold here). The inconsistency is when I would stop and start again. Even with an independent regulator on the hose along with a filter, it seemed like the spray pattern didn't stay consistent. Lubing it up and really working the trigger may help with establishing a more constant result, thus another reason for 4 stars. It didn't clog, spit or sputter and once the air valve spring works in I have no doubt it will have a positive effect on consistent spray patterns. I also considered that spray issues after longer stops may have been due to the paint cooling in the gun and as science dictates, it becomes more dense. The primer phase temps were in the mid-50s, so not the best environment to make a good judgment and I literally opened the box and used it without even disassembling it first. All-in-all, I've seen worse in more expensive guns but obviously don't expect to be putting out show car quality paint jobs. FYI, my go to gun for individual parts is an SRiPro (base and clear)...and my second one arrived with the spreader valve threads completely stripped. This kit arrived in better working condition than the manufacturer's more expensive model.
J
2025-07-05 10:14:23
This gun lays down glass. This is firmly in the hobby/small production grade range. Most Great guns!
donnie harvey
2025-06-05 14:21:11
Great quality. Really good buy for the money. I have owned many paint guns from the brand highly recommend. Even at the lower end of there range they lay well. Super fast shipping. Said it may take a couple weeks. Received in 3 days
Ricardo Gómez
2025-05-03 12:24:40
The media could not be loaded.
RG
2025-04-13 16:21:29
I was a professional auto and truck painter in years past. Back then, my shop used DeVilbiss siphon or "pressure pot" sprayers as the standard of the industry. I still paint from time to time and thought I would try out this set. I am disappointed in the low volume of material delivered. The spray pattern is excellent but volume delivery is dismal. Takes twice as long to get around the car as it should. Also, the guns need to be disassembled to fit back in the fancy plastic case. Not happening! This is NOT suitable for professional quality car painting.
Auto stars mechanic
2025-02-25 14:37:48
Good quality, reasonable price
Christian Alain GarcÃa Vázquez
2024-12-03 15:53:54
Muy buen producto, funciona excelente... lo pude usar enseguida que me llegó. Pulveriza muy bien a alta presión, si acaso pudiera criticar algo, es que en detallitos no puede pulverizar ligeramente como las marcas baratas.
Shawn Forget
2024-12-01 15:50:53
Have only used the paint gun so far but worked great. Laid on a nice smooth finish
Client d'
2024-11-27 20:36:00
Pour mon auto qualité prix excellent j’aime bien
Hazel
2024-11-26 14:59:47
It was for my brother, who is a autobody mechanic.Very pleased with it. He saved at least 100.00 buying it at Amazon and it arrived before scheduled date.
Recommended Products
