Your cart is empty.
Your cart is empty.Drill and tap holes in one application and deburr and countersink in a single step with DEWALT IMPACT READY Tap & Drill Bits. Designed for impact drivers, each drill bit is equipped with a speed tip to penetrate materials quickly. Crafted for extreme durability to withstand tough jobsite conditions.
ShepDawg
2025-09-03 20:20:09
Best way to drill and tap for the rated material thickness.
jared
2025-08-12 10:54:58
Works and lasts
David
2025-07-30 10:34:45
I wasn't too sure how well these would work, but I need to tap 12 holes in 1/4 steel pipe and decided to try this bit instead of my old tap set. I was pleasantly surprised how well they worked. I did drill a very small pilot hole because I needed the threaded holes to be in precise locations. The pilot holes were 1/16" and the final tapped hole was 3/8". I think one of the keys may be the drill. I first tried with a cordless drill and had zero luck. So I got out my 3/8" Milwaukee corded drill and this made a huge difference. I would say that after the pilot holes were drilled, I drilled the 12 tapped holes in less than 15 minutes. I completed all 12 without breaking the tapping bit and it is still in good condition. It does require some care in reversing the bit back out of the hole once it is completed. I gave it four stars only because it does takes some care and the appropriate drill to make these work. However, the bit saved me a lot of time and I intend to use them more.
Hard Bush
2025-07-13 21:08:06
It did what it is supposed to do.
Customer
2025-07-09 16:03:55
Worked great. Used it to tap for 4 bolts in my trucks frame. Was sure it would break. But did a flawless job and still in good condition. Great for the money.
Dan
2025-06-24 10:12:23
Nice concept but unless you are able to hold the drill square to the work you are going to brake this off.I had a feeling this was going to be an issue so I was super careful, was able to get through 3 holes and on the 4th it caught and snapped it off.Using a drill press this would probably not be an issue.
Phillippe White
2025-06-21 10:08:10
Bought this to tap some holes quickly. Hole was already drilled. It made the tap easy and worked great on aluminum.
Brad A.
2025-04-24 09:10:03
The bit is a fantastic idea, but did not last through all of the holes we needed to complete. We were able to get about 10 holes per bit.
Jose O.
2025-03-31 13:49:00
Despite being the Walt it is very very bad quality. It only lasted 2 use and it broke!! Very very disappointed.
Alfredo
2025-03-04 14:43:44
Entrega en tiempo y forma, muy buen servicio.
Tgj1313
2025-02-15 14:23:32
Good quality bit!
Chris
2025-01-22 10:53:24
I’ve used these before, and they were great.I bought 2 this time to use one as a back up. Both snapped. Straight out the box and into the makita impact driver and going through the metal and both snapped. Wouldn’t recommend.
Terry Smith
2024-12-16 10:55:40
Tried it out once and it worked perfectly as designed.
Recommended Products
$26.40
$ 12 .99 $12.99
$18.75
$ 8 .99 $8.99