Shopping Cart

Your cart is empty.

Your cart is empty.

Digital Vibration Meter VM-6310 Vibrometer for Moving Machinery with Velocity 0.01~199.9mm/s

4.8 (2) Write Review
Free shipping on orders over $29.99

$188.00

$ 83 .99 $83.99

In Stock
  • In accordance with ISO 2954, used for periodic measurements, to detect out-of-balance, misalignment and other mechanical faults in rotating machines.
  • Specially designed for easy on site vibration measurement of all rotating machinery for quality control,commissioning, and predictive maintenance purposes.
  • Individual high quality ccelerometer for accurate and repeatable measurements.
  • Measuring Range: Velocity: 0.01mm/s~199.9mm/s True RMS, Frequency Range: Velocity: 10Hz~1kHz
  • Bearing condition monitoring function.


Product Description

Vibration Meter VM-6310 used for measuring periodic motion, to check the imbalance and deflecting of moving machinery. Specially designed for easy on site vibration measurement of all rotating machinery for quality control,commissioning, and predictive maintenance purposes.

Vibration Meter VM-6310 Specification

Sensor Piezoelectric Transducer
Measuring Range Velocity: 0.01mm/s~199.9mm/s True RMS
Frequency Range Velocity: 10Hz~1kHz
Accuracy 5% of Reading+2 digits
Operating Conditions Temperature 0ºC~50ºC, Humidity<90%RH
Power Supply 4x1.5V AA(UM-3)Battery
Weight 181g(Not Including Batteries)

Standard Accessories

1 Piece Main Unit
1 Piece Piezoelectric Transducer
1 Piece Powerful Rare Earth Magnet
1 Piece Probe(Cone)&Probe(Spherical)
1 Piece Carrying Case(B04)
1 Piece Manual Book

Brittany
2025-08-21 14:40:55
It works but it feels like it’s going to fall apart if the wind changes direction to fast. Don’t look to hard at the screen or you’ll scratch it. Not impressed for what I spent.
k
2024-12-23 12:19:36
the product only works if the 'metal' end can sit on top of the actual 'thing' being tested. I needed it to just sit on top of the floor in my home, simple enough right? to start the cord that attaches the measuring metal end to the measuring unit needs to be perfectly straight in order for the measuring metal piece to be balanced on the floor. Well its not straight, it can not be held or straightened out. the vibration will not be accurate if it can't sit on its own on the thing being measured. Every time i try to place it on the floor it just falls over because the cord attached to it is bent every 4 inches from being folded add to that the cord it about 2 1/2 feet long. no way can it stay straight long it just falls over. I waited to long to return it, now i'm out 200 bucks......