Shopping Cart

Your cart is empty.

Your cart is empty.

DIN Valve Scuba Adapter 4500psi High Pressure PCP Paintball HPA Tank Fill Station

Free shipping on orders over $29.99

$25.99

$ 12 .99 $12.99

In Stock

1.Color:Dn2 Mircrobore Hose - Silver


  • Standard SCUBA Yoke Adapter Pocket, compatible with standard K-Valve, J-Valve and H-Valve .
  • 8mm standard female quick-disconnect coupling plug, 24 inch stainless steel spring protector hose.
  • Can also work with PCP air rifles with compressed air from a scuba tank and fill paintball, HPA co2 tanks.
  • New double o-rings design, longer service life, working pressure up to 4500 psi.
  • Simply connect each fill adaptor to the male air tool fittings, female quick-disconnect coupling with precision bearing steel ball, high pressure resistance,this is one of the needed items to have in your parts kit.



Product Description

GURLLEU High Pressure Air Refill Station & Charging System made of high-quality material through advanced technology.

Charging System

High pressure charging system with valve gauge, easy to installation and operation.

Charging System

Adapter

Structure

Hose

Working pressure

Pressure

Pressure service

Working pressure - 4500 psi,

Gauge indicate pressure - 6000 psi

Screw

Thread fastening

Suitable size tightening nut and pressure relief button, convenient and stable

standard

Standard

CE standards

Installation and Assembly

Assembly

Main Uses

application

Application

Widely for fire-fighting, scuba shop, snorkeling dive system, PCP rifle and Paintball tanks for filling


W. Jones
2025-09-05 09:27:43
Used to fill a pellet gun. It works great.
Bob K
2025-07-06 11:02:07
I was a bit concerned about this being the right thing because the description says "DIN Valve". But it looks like it's a Yolk connector. As it turns out, it is a Yolk valve connection. It might also work with DIN valves, but I can confirm that it works with Yolk valves as that's the only kind I have.The hose has a quick disconnect on both ends. It has a male QD that attaches to the adaptor body (with the screw and pressure gauge) and a female QD on the other end. So, you can use this with or without the hose. It works just as wall in some cases you connect the paintball tank directly to the adaptor body. It's also one less thing to carry, keep track of, or lose.The markings on the pressure gauge are small and can be hard to read at times. The face on the gauge will glow in the dark when exposed to light. But that doesn't seem to help make the markings more visible.You need to make sure the pressure release value is tightened down before you start to inflate the paintball tank, or you'll blow a bunch of air into space... not the tank.
FD
2025-05-22 20:43:06
Good value from what I found on Amazon to fill my PCP. the Guage was off by about 500 psi (lower) compared to my Pcp. I believe my PCPs guage so I use it. Functions well otherwise. For me price overrides the Guage issue to still deserve 5 stars.
AndrewTalamantes
2025-05-19 16:06:04
Good clean manufacturing . Build to last , did not have any problems hooking it up and using it ... gages worked just fine , light weight and east to store ... if you have a hpa tank and need to get it filled from a dive shop scuba shop paintball store etc , you might need to have this .. my local dive shop did not have this attachment for my ninja 4500 carbon fiber tank . I had to go back with this tool to make it work..
J D
2025-03-29 14:17:22
I liked this product and the price is good , it's so easy use , good quality material, but the gauge is little small but this adapter is very Practical the shipping very quickly Works as intended. Appears to be constructed of quality materials. Doesnt leak. Pressure gauge is small but it does the job. Requires a quick connect fitting on the end of the hose, which I was able to find at the local hydraulic hose/fittings shop
Thorne Hamstring
2025-03-23 14:14:21
Fits a SCUBA tank perfectly, and attaches easily to the fill port on my Beeman rifle. Fills to 3,000 PSI in seconds.BE REALLY CAREFUL WHEN FILLING. This valve adapter has no step down feature for tank pressure. IF YOU HOOK IT UP TO YOUR PCP GUN, AND CRANK THE SCUBA TANK VALVE FULL OPEN, YOU WILL BLOW THE SEALS OUT ON YOUR GUN. ALL IT TAKES IS TO BARELY, AND CAUTIOUSLY OPEN THE TANK VALVE.Do I recommend it? Absolutely. Just use caution when filling your rifle or pistol, unless you LOVE replacing seals. I found a used, and recently VIP-ed Aluminum 80 (3300 PSI) for $99 at my local dive shop. That’s a lot better than the $400 and $500 tanks and valves sold by air gun outlets.
Mark Robert Carico
2025-03-04 15:48:32
Sample size of one but it works for me and I have had no issues. Only a hand full of fills in though.
JC
2025-01-24 14:04:45
The DIN Valve Scuba Adaptor is straight forward enough in its purpose. The tolerances on the release valve, however, were not as tight as they should be for its rating. The valve requiring wrapping plumber's tape to prevent air leak under pressure. We did this rather than returning the unit for exchange, as we were under tight time considerations.
Recommended Products