Your cart is empty.
Your cart is empty.DiversiTech Corporation is North America’s largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. We offer high-quality, innovative and advanced products that save time on installations. Combining exceptional customer support with a full line of HVAC parts and accessories, we provide the resources and tools necessary to meet any customer needs.
Wolfman432
2025-09-05 11:17:53
This is thin, but true to size and a good value. For an SxS ridge, you will likely need this size.
Howie
2025-08-12 13:17:30
I needed a pan to wash the grill from my smoker in. This pan works great! Lightweight, yet durable. Got a sprinkler cap from the store and I was in business. Two big squirts of dish soap and then filled with the hose. Set the grill in it after cooling and let sit for at least 30 minutes. All the stuff wipes right off with a scrub sponge. Grill looks brand new every time I use the smoker! 19' x 36" Grill!
shris
2025-08-08 10:46:37
This tray is thick and sturdy feeling. I didn't need it to have a preinstalled outlet, I would have preferred to position that myself. However, what I needed was the proper sized tray for my chest freezer and this is really really close.My chest freezer has been dripping condensation on my vinyl floor for years, and the picture shows the two different positions it's sat in my pantry--this is after we removed TWO layers of vinyl floor. Unfortunately the subfloor was particle board, so the stuff came out the texture of coffee grounds and wet bread when we removed it. Both layers of vinyl were unbroken and installed decently as far as we could tell, so the moisture damage under this freezer says to me I can't trust even a piece of plastic flooring to protect the wood from a slow drip like this.We installed new moisture resistant plywood in place of the particle board, then moisture barrier, then vinyl plank flooring the manufacturer says is waterproof when properly installed. We've silicone sealed the edges of everything and it's all as tight as we can get it, but I still don't want to trust those claims in the face of a drip that never travels out from under the freezer.Enter this tray. It's a bit too large in one direction so we may end up trimming off one long edge (the bit with the preinstalled fitting), but I feel confident it will catch the pesky drips and keep them from ever impacting my floor or causing it harm again.I wish it were white like the freezer, but I care more about confining the water than whether my freezer will be stylish in the corner of my pantry. I also don't need the lip to be quite this high, it's quite a bit deeper than I actually need. So one star off for color and depth and the preinstalled fitting, but this really was the closest available tray to my dimensional needs.We learned so much during this floor redo we got a tray for the dishwasher, the sink base cabinet, and the washing machine too. They're all from different makers, unfortunately, but at least they're all available.I expect to be much happier once we get this tray installed and that lurking puddle mopped up one last time.
Kazz
2025-06-21 12:23:31
Our HVAC system was installed by a company recommended by the manufacturer. The secondary condensate pan - a galvanized tray - was part of the equipment delivered to the site but never installed. This was never noticed until the primary line clogged and leaked through to the first floor ceiling. The unit is not accessible as it was when we were building the house. Consequently it was much more of a challenge to add a secondary pan to a constricted area. This tray proved to be exactly the right product and size. It was a very tight fit even with some carpentry work, but it is installed. Contrary to opinion of DiversiTech phone Rep it is NOT bendable. Yes, it can be slightly torqued lengthwise but don't count on bending it to get it through a too small opening. Great aftermarket item.
Tommy2016
2025-06-07 18:50:17
Don't buy this unless you have seen the product in person. These are cheap imported garbage that crack easily. Try another manufacturer or be disappointed.
MWorks
2025-06-05 18:49:06
Great product. Deep enough to navigate water spill. Not very thick so that you can stand on the edges but that's not the purpose. I used it in finished basement to prevent spill under water softener.
kaistutu
2025-05-12 13:44:37
Good strong item. Placed one under my minisplit to capture the drainage and put a 3/4 pvc pipe to drain. Placed another in my greenhouse to hold plants to keep the water off the decking and to act at a "saucer" to hold water between waterings.
TCombel
2025-04-23 09:13:25
As described but on the thin side. I bought this to install under a commercial ice maker. The dimensions were tight and I couldn't get all four feet in it (not their fault). I went to slide the ice maker and the pan together and I actually busted the ice maker out of the side of the pan. I did buy another, smaller one that just sits under where the ice maker drips. The fact that it comes with the fitting is nice as well.
Wolfman432
2025-03-28 14:15:27
This is thin, but true to size and a good value. For an SxS ridge, you will likely need this size.
Howie
2025-03-27 17:55:29
I needed a pan to wash the grill from my smoker in. This pan works great! Lightweight, yet durable. Got a sprinkler cap from the store and I was in business. Two big squirts of dish soap and then filled with the hose. Set the grill in it after cooling and let sit for at least 30 minutes. All the stuff wipes right off with a scrub sponge. Grill looks brand new every time I use the smoker! 19' x 36" Grill!
shris
2025-03-18 18:01:48
This tray is thick and sturdy feeling. I didn't need it to have a preinstalled outlet, I would have preferred to position that myself. However, what I needed was the proper sized tray for my chest freezer and this is really really close.My chest freezer has been dripping condensation on my vinyl floor for years, and the picture shows the two different positions it's sat in my pantry--this is after we removed TWO layers of vinyl floor. Unfortunately the subfloor was particle board, so the stuff came out the texture of coffee grounds and wet bread when we removed it. Both layers of vinyl were unbroken and installed decently as far as we could tell, so the moisture damage under this freezer says to me I can't trust even a piece of plastic flooring to protect the wood from a slow drip like this.We installed new moisture resistant plywood in place of the particle board, then moisture barrier, then vinyl plank flooring the manufacturer says is waterproof when properly installed. We've silicone sealed the edges of everything and it's all as tight as we can get it, but I still don't want to trust those claims in the face of a drip that never travels out from under the freezer.Enter this tray. It's a bit too large in one direction so we may end up trimming off one long edge (the bit with the preinstalled fitting), but I feel confident it will catch the pesky drips and keep them from ever impacting my floor or causing it harm again.I wish it were white like the freezer, but I care more about confining the water than whether my freezer will be stylish in the corner of my pantry. I also don't need the lip to be quite this high, it's quite a bit deeper than I actually need. So one star off for color and depth and the preinstalled fitting, but this really was the closest available tray to my dimensional needs.We learned so much during this floor redo we got a tray for the dishwasher, the sink base cabinet, and the washing machine too. They're all from different makers, unfortunately, but at least they're all available.I expect to be much happier once we get this tray installed and that lurking puddle mopped up one last time.
Kazz
2025-03-11 13:44:19
Our HVAC system was installed by a company recommended by the manufacturer. The secondary condensate pan - a galvanized tray - was part of the equipment delivered to the site but never installed. This was never noticed until the primary line clogged and leaked through to the first floor ceiling. The unit is not accessible as it was when we were building the house. Consequently it was much more of a challenge to add a secondary pan to a constricted area. This tray proved to be exactly the right product and size. It was a very tight fit even with some carpentry work, but it is installed. Contrary to opinion of DiversiTech phone Rep it is NOT bendable. Yes, it can be slightly torqued lengthwise but don't count on bending it to get it through a too small opening. Great aftermarket item.
Tommy2016
2025-02-10 14:46:26
Don't buy this unless you have seen the product in person. These are cheap imported garbage that crack easily. Try another manufacturer or be disappointed.
MWorks
2025-02-09 11:41:15
Great product. Deep enough to navigate water spill. Not very thick so that you can stand on the edges but that's not the purpose. I used it in finished basement to prevent spill under water softener.
kaistutu
2024-11-27 14:01:59
Good strong item. Placed one under my minisplit to capture the drainage and put a 3/4 pvc pipe to drain. Placed another in my greenhouse to hold plants to keep the water off the decking and to act at a "saucer" to hold water between waterings.
TCombel
2024-11-26 10:36:08
As described but on the thin side. I bought this to install under a commercial ice maker. The dimensions were tight and I couldn't get all four feet in it (not their fault). I went to slide the ice maker and the pan together and I actually busted the ice maker out of the side of the pan. I did buy another, smaller one that just sits under where the ice maker drips. The fact that it comes with the fitting is nice as well.
Recommended Products
