Your cart is empty.
Your cart is empty.International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
clyde714
2025-09-07 15:43:13
I just used this to jack up my car so I could paint the calipers. It performed well - minimal flexing, no slippage, and no damage at all to the pinch weld. One thing to note about it - it has a 3.9" diameter, so check the diameter of the foot of the jack you plan to use to make sure it will fit properly. Many 3ton jacks have a 3.75" diameter foot, so this puck is slightly too big. You can still use it, but just be aware it won't fit snugly on the foot.
john
2025-09-06 14:36:20
I have been using these for several years. They are very durable and help distribute the load of the jack effectively. With most uni-body automobiles having a seam running between the wheel wheels, corrosion can attack and weaken the steel in the area of the jacking point. Before utilizing these "pucks" to distribute the load, the steel lifting point of the jack would deform the seam and surrounding under-body. These pucks seem to resolve that issue and hence they do exactly what I was hoping for.
Richard M
2025-08-29 17:44:37
Two features: One, it straddles the weldment on a Chrysler 200 at the front lift sides of the car, so the sheet metal is not damaged when using a floor jack. Second, I was able to replace the thin rubberized insert in my floor jack using this part as an insert. Since the lifting plate swivels there is no need for this jack pad to have to rotate on the lift plate. It made a snug tight fitting assembly. With careful use of a putty knife and tapping in place with a rubber mallet I am sure it will stay in place for years to come.
Thomas B.
2025-08-08 18:44:12
So far, this pad has proven to be up to the task. The pad is very thick, durable and provides added protection to stop metal-to-metal contact. The pad’s width is just a hair too wide for my hydraulic jack, but nothing that you cannot manage. I do like the two types of cross slot design and the excellent price point. Since this pad has yet to be put to the test over any length of time, I am giving it four stars for now and will update the review if warranted. But for now, quite happy with the jack pad.
harleyrider02
2025-07-10 18:36:03
Fit my jack pad perfectly
Jnye1001
2025-06-30 17:47:36
Protects my frame and pinch welds. Does the job and hold up well over time. Recommended
D. Lippert
2025-05-15 12:22:55
Very high quality item. To make the bottom of the pad fit flush with the top of my jack, I shaved a little from the edges of the pad, to accommodate the ridges on my jack. It was an easy mod and the pad works great.
Jacob
2025-04-25 15:01:26
saw so many options on amazon for products very similar, going back n fourth but finally landed on this one due to the 2 options of depths it gives, also the height(thickness) which was mostly what i needed it for, my side skirt was hitting the jack when lifting up the car, this gave me the extra space to clear & prevented any extra damage to the mounting points. def recommend, only down side i can say but didn’t cause a issue was that the bottom of the rubber didn’t sit evenly on the jack like i’d hope but that proved to not be a issue at all. the pics posted is after lifting the car from all 4 corners 1 time each.
Armando Chapa
2025-04-02 16:24:44
Cumple muy bien con su función y es de buen material.
Daniel
2025-02-04 15:58:29
Sehr durchdachtes System mit den 2 unterschiedlichen Tiefen der Ausnehmungen. Passt perfekt auf gängige "große Wagenheber".
Michael Wentzel
2025-01-07 17:52:58
Alles gut ðŸ‘ðŸ¼
Norbert Vogt
2024-11-23 12:37:34
Habe gerade die Winterreifen ans Auto geschraubt und dabei diesen Gummiträger benutzt. Was soll ich sagen, das Ding trägt sogar problemlos meinen SUV. Kann ich nur empfehlen. 5 Sternchen und noch 1 Sternchen extra für die schnelle Lieferung.
Recommended Products
