Your cart is empty.
Your cart is empty.Most aftermarket racing seats are universal in application. They can fit into an array of vehicles, but the only thing that might trouble your DIY job is the racing seat bracket that bolts on to the racing seat. This racing seat bracket would guarantee the fitment, so that any universal racing seat can surely be bolted on to the car that the bracket is made for. Compatible with 90-97 Miata; Fit Models with Bucket Seat ONLY
Jonas Campbell
September 5, 2025
Easy to install, and worked well with my new seats.
l3x
August 31, 2025
I am going to be honest in my review. These brackets are constructed out of very flimsy material. The holes do not line up with their actual racing seats that they sell. I was very suprised as holes are just randomly drilled and are off by almost an inch. I have over 10 years in the Automotive field and these brackets are a safety concern. The bracket will likely snap in a collision. There should be laws in effect to protect this kind of stuff from being produced. If I want the seats and sliders that I ordered through them, I will have to drill an additional hole in between two preexisting holes. Given that this product is already made out of very thin metal. I am highly worried that this bracket will not hold up with constant weight of 160lbs put in the seat. I am writting in depth so nobody gets hurt or wastes their money on these brackets. I'm not even going to return this product. I am currently looking into contacting someone to review this product for safety and legaility concerns. This is a hazard in a vehicle. The seats I will say seem to be constructed well. This company has no buisness making mounting brackets and I will never order another product from them again because of this. I understand aftermarket applications can cut corners, but this bracket is as flimsy as aluminum. This is not a good look for this company. Do as you please with your momey, but I cant stand silent on this. Ive provided photos so you can see how dangerous the brackets are. Holes are drilled on the edge of metal, in a accident these bolts will break and cause serious injury or death to the driver. I tried to save a couple bucks, but I will gladly eat the money on this one to bring it to others attention. You get what you pay for. Ive had good experiences with a lot of aftermarket companies, but this was not one of them. Its even possible they are not aware of how dangerous these are, but I am making it away in my review. Amazon needs to step in amd ban the sale of this specific product.
Salahudin
August 9, 2025
I was honestly skeptical at first. Did the passenger side first and boy was that a bother. Could not be sure whether it was the bracket itself or the funky passenger transmission shape area so I gave the item 5 stars anyway. The driver side fit like a glove and I am definitely enjoying the seats.
DBN
July 23, 2025
Had to drill em a bunch to fit the application, they're strong enough and held up to the additional holes.
JEROME BRADLEY
July 3, 2025
driver bracket needed some creative modifying to fit is not as universal as it says
Charles
July 2, 2025
Not direct fit some modifications are needed especially on passenger side
Wendell Mathis
June 24, 2025
Good quality
Liem Vo
May 5, 2025
These brackets will 100% not fit a 2004 ES1 Civic 4 door (LX trim) unless you don't mind going through the hassle of extensive modifications and have a couple hours to spare for that.Like other reviews have stated, of all 4 mounting holes to bolt the brackets to the chassis, only 2 will barely line up decently while the remaining are completely off the marks. You will have to drill AND cut & weld in order to have all 4 holes of the brackets line up to the existing ones for the stock seats.And to keep the sliders on the seats that they're also selling and supposedly should work with these brackets, you will have to drill new holes and add spacers between the sliders and the brackets in order for the sliding mechanism to actually be clear of interferences and work decently.The welds on these brackets are not very structurally sound, so beware of this as well.Tl;Dr: overall completely AVOID these brackets if you value your time and want something that will bolt up nicely to the stock mounting holes without requiring you to bust out the power drill, grinder, and welder.
Jules simard
April 25, 2025
I don't know what to thing about it... They feel pretty cheap and a little bit unsafe! The welds seem handmade and are not very reassuring. In addition, the metal used is very thin which gives me doubts about the solidity. In addition, the holes do not align perfectly with the car's original anchors. I would recommend investing a little more in NRG supports which will be of much better quality!Despite everything, they hold the seat in place well so far!
Customer
March 14, 2025
Driver side bolted in with a decent amount of fighting with the mount, but Very tight spacing with center console. Passenger side? Didn't even bolt in. The actual frame of the mount is so off square, literally only 1 bolt will ever actually thread in. Save yourself the swearing and insanity, and save up your coin. Invest in a reputable brand and save yourself the headache. I'm not about to start drilling into the mount and void any possibility of returns and potentially having to do extensive mods to get this pos to work.I will be returning this as soon a possible.DNA should be ashamed to sell this product to consumers.FtlZero stars if it was possible
Susie Zinck
December 30, 2024
These are completely garbage. Don't fit my mustang. Had to cut and weld to make fit. They are thin and bend easy. Waste of money
Customer
November 21, 2024
Don’t trust your life with theses things. Thin metal and Bad welds.
Recommended Products
$12.15
$ 5 .99 $5.99