Your cart is empty.
Your cart is empty.Dorman 05107 Spindle Nut
Nick
2025-09-04 15:05:05
Seems to be exact fit. Must be replaced each time they are removed since they have sintered? threads that act as locking mechanism.
Grilled Cheese FG
2025-08-26 20:04:04
Exact replacement. These are prevailing torque so they should be replaced if they dont stay on by themselves without tightening.
Customer
2025-07-22 16:26:11
works, fits and took the torque with no problem. that to Me is the best kind of PART !
Mike_of_bbg
2025-07-18 11:56:16
It's a nut. Fit my 2003 Chevy Impala front hub. This has a 34mm hex whereas the original was 36mm, so 2 sockets needed. But I knew that ahead of time.These are supposed to be replaced (like the hub mounting bolts) when you replace the wheel bearing/hub assembly. So I did.If for some reason in the future this nut does not adequately serve it's purpose, I'll write back.
DementedDad
2025-06-09 14:01:33
Perfect fit for my 2004 Chev Impala. Used a 33mm socket for snug and secure fit of the socket to the nut.
Walt Northrup
2025-05-19 12:10:30
Not much to say. Used this on the axle of my 05 Vette. You need 34mm socket. The original GM nuts are 33mm. Don't know if this is true for non Vette vehicles.
TDS
2025-05-14 15:08:12
After reading online figured it was a good idea to replace the hub bolts when having the Hub Assembly changed on my 2008 Chevy Impala. Might be overkill but for a few extra dollars seems well worth it.
Tyler
2025-03-15 13:06:52
This fit the front axles on a 2008 Pontiac Grand Prix
Thomas Breton
2025-03-07 18:46:00
you need a 34 mm socket to put it on. Working good so far ... one day.
Paul
2025-01-31 14:45:24
Exactly what I needed just incase it was needed.
Recommended Products
$32.49
$ 16 .99 $16.99