Your cart is empty.
Your cart is empty.Dorman's Disc Brake Caliper Bracket Mounting Bolts come in a variety of sizes and are suitable for a range of applications. All our Mounting Bolts are constructed from high-quality materials for a long service life.
The Penguin Popper
August 28, 2025
the bolts fit 2010 Tucson caliper bracket, but it is almost a joke that if you are missing these bolts then you are surely missing the washer?!?
House
August 24, 2025
Used these on my 2009 Hyundai Santa Fe AWD. They were a tad bit shorter than the OEM but they work so I'm not complaining or deducting stars for it. They do the job.
johnny l mayes
August 23, 2025
Good product
Jack of all trades, Master of Some
August 17, 2025
So first off these are the correct thread for the calipers on a 2012 Kia Forte EX. They are also the correct size but only if you use your old Spring washers. Make sure you salvage the old bolt washers, otherwise you will end up with the tip of the bolt grinding against the inner side of your rotor. You need that 1/8". Otherwise these work. I would recommend that you carefully thread them by hand, because it's really easy to cross thread these because of the fine thread pitch. Another tip is I would take off the red Loctite with a wire brush or drill brush. As long as you torque these correctly, you will not have any issues with them loosening on you, and the red Loctite will make them extremely difficult to get off later on when you change the rotors or calipers again down the road.
Gleyvis
August 8, 2025
No tengo quejas
Clarence Stevens
August 5, 2025
Stupidly didn't tighten the original bolt. So ot came loose and fell off somewhere. Needed a replacement. Bolts arrived on time and fit like a glove. Did have to buy lock washer to ensure bolt would stay.
Kindle Customer
July 10, 2025
Third thing that I have purchased from Dorman that didn't fit despite confirming the vehicle year/make/model. I'm done with them.
Angela
June 30, 2025
These were listed to fit my 2020 KIA Sportage. The threads are proper, but the bolt is around 1/4" to short compared to the factory bolts. They only screw around 1/2 way into the caliper bracket. To risky to chance them coming loose to use them in a braking system.
Tyler Murphy
May 1, 2025
These caliper mounting bolts are perfect fit for 2011 Hyundia Elantra. You only get 2 Bolts, I would recommend going to local parts store for cheaper price.
Dominic
February 18, 2025
Satisfait
JIN
February 8, 2025
These bolts are identical to the existing bolts and perfectly fit.
Customer
December 24, 2024
This was not the right size for the rear caliper bracket on my 2007 Santa Fe. Had to go to hyundai to buy the right ones, they sell them in bags of 5 for only 20 bucks. If you're looking to replace them on your rear caliper, call Hyundai or Kia and get them from there. Took me a day to wait, then I had them.
Gabriel
December 17, 2024
Fits perfectly
Recommended Products
