Your cart is empty.
Your cart is empty.This washer fluid reservoir is designed to match the fit and function of the original equipment reservoir. It is engineered to withstand the stresses of underhood heat and engine vibration on specified vehicle makes, models, and years. This part is compatible with the following vehicles. Before purchasing, enter your vehicle trim in the garage tool to confirm fitment. [Buick Rainier: 2004, 2005, 2006, 2007] - [Chevrolet Trailblazer EXT: 2002, 2003, 2004, 2005, 2006] - [Chevrolet Trailblazer: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009] - [GMC Envoy XL: 2002, 2003, 2004, 2005, 2006] - [GMC Envoy XUV: 2004, 2005] - [GMC Envoy: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009] - [Isuzu Ascender: 2003, 2004, 2005, 2006, 2007, 2008] - [Oldsmobile Bravada: 2002, 2003, 2004] - [Saab 9-7x: 2005, 2006, 2007, 2008, 2009].
art
2025-06-21 15:40:02
Fit good
Omar
2025-05-14 10:03:39
Sirvio perfectamente para el liquido del parabrizas. Buena marca y mas si es para GMC envoy 2003.
steve
2025-04-26 10:07:33
Received this product yesterday and I installed it in less than 30 minutes. Had to have this because winter is on the way and I have been using Rain X fluid to help melt the ice and snow during winter months.
Bruce C Gibbs
2025-04-19 11:31:02
Straight up replacement works great arrived as promised
Inga
2025-04-15 13:56:48
Was not made well
Tim Weishaar
2025-03-09 13:41:42
My application is a 2003 Chevy trailblazer LT option package.This reservoir/tank fits and works but be ready for a few things: 1. The hole for the washer level sensor in the new reservoir is ~1/16 larger than the same hole in the original tank. Net result here is the old sensor grommet is too small to seal at all and that sensor and grommet are VERY DIFFICULT to come by. I ended up modifying/removing the center from the plug that came with the new tank so it would work with the sensor. Worked OK and sealed with a little RTV sealant, so don't throw away or lose those plugs supplied with the new tank. 2. MAKE SURE to remove and apply a small amount of RTV sealer in the groove of any of the plugs supplied that are used to plug holes not used for your application. If you don't apply sealer and let it set up, those plugs/holes will seep/leak! 3. Be prepared to slot the 3 holes in the airbox that cover that covers/attaches to/finish this assembly. The attachment holes are drilled slightly different than the OE tank, but it's nothing that a round file or small burr on a drill won't fix.The manufacturer, (Dorman), could improve this part by sending along any possible grommet needed. That would cost just a few $$ more to do that and save time and frustration trying to make something work.
Brenda Marquez
2025-03-03 18:23:47
Price was amazing & affordable ! Got here pretty quickly
Dana Bishop
2025-02-24 21:24:00
This was a perfect replacement for my original trailblazer (05). It took a bit of work to get it in but it works great all the fittings were as they should be....I know dont get that fluid light low on anymore!
John Pratt
2025-02-07 15:06:12
Fit perfectly!
Suzanne Durling
2025-01-29 18:23:00
The product was exactly as advertised and worked perfectly once installed.
Michael costa
2025-01-08 14:38:58
After unit was installed and filled, found it was leaking from grommet, had to remove and repair on my dime. Poor quality control should of been tested before sent out by manufacturer. Who pays for my time doing the job twice and repairing the leak???
Recommended Products
$42.03
$ 18 .99 $18.99