Your cart is empty.
Your cart is empty.Tired of guessing how hot or cold it is outside your vehicle? Restore reliable, accurate outside temperature readings with Dorman's Ambient Air Temperature Sensor. The Sensor relays the temperature to the On-Board Computer for optimal climate control.
Barry S Mitchell
2025-08-24 10:42:46
Other than being shaped a little differently than the OEM sensor, the electrical connection and fit is the same. It seems to be working fine.
Ron Garner
2025-08-19 15:25:26
Had to pull the grill but it works great! Highly recommend.
Gadget_Guy
2025-07-30 10:36:20
I ordered this outside temperature sensor for a 2013 Ford Mustang GT. The old sensor read a constant 50 degrees no matter what the actual outside temperature. An OBD2 diagnostic indicated the old sensor was defective.Installation was straightforward but somewhat time consuming. The hardest part of the install was gaining access to the sensor. On the Mustang, it is located on the driver's side behind the lower front grill. I had to get under the front of the car and remove the undercar shield that has about 14 (maybe more) screws holding it on. After that, I unplugged the old sensor from its wiring harness, removed it, and then installed the new sensor.After installation, it took the new sensor about 24 hours to "calibrate" and display an accurate outside temperature. I have been using the new sensor for about 3 months now. So far so good!***Update January 2020***: Its been over a year now and this temperature sensor is still working well.
Kriss
2025-07-24 12:18:21
Seemed to do just the task needed
Watch Man
2025-06-14 18:34:23
It's cold outside and my 2002 Mercury Grand Marquis EATC Climate Control shows an outside temperature reading +127-degrees. And my heat will not turn on. I only have air conditioning. I ran the EATC self-test and had an 040 error code indicating a shorted Ambient Air Temperature Sensor.I ordered and installed the Dorman 902-021 Ambient Air Temperature Sensor. Problem solved! It's now warm inside my 2002 Mercury Grand Marquis with my heater working!
Eric
2025-06-02 16:26:37
I own a 2014 Mustang V6 and was always curious why the external temperature always read 50 degrees. Occasional, that temperature would change (at one point, -37 degrees) so I figured there must be an external temperature probe that was malfunctioning. Imagine my surprise when, after lifting the front of my vehicle and scooting underneath the front bumper, I found the connecting wire zip tied to the frame with no sensor attached! I found the right OEM part number and ordered it. When it arrived, it installed quickly and even attached to the inner bumper. Initially, the temperature didn't change. I took it for a drive and the temp started to increase. It got to within 1 degree of the actual outside temperature. I'm very happy this was such a simple fix. The part appears well made. It works, what more could you ask?
Connie Christman-Bond
2025-05-31 12:19:06
All good seems to fix everything video shows how the originals have the word Ford on them in the new ones are scratched out must be some kind of legality or they're just replacing the sensor part using the old Ford housing who knows on things that are 24 years old 2001 Lincoln navigatorGood Ford Motorcraft replacement reads around 22,000 ohms instead of my broke one that's 10° off that red 34k ohmsAlso noticed there's an extra tab may have to shave it off on the new replacement
david moss
2025-04-21 18:06:48
fit was perfect
VÃctor MartÃnez Herrera
2025-04-20 09:09:19
Buen producto. Lo recomiendo.
David P.
2025-04-13 17:25:21
Finally found location of sensor on my 2004 Ford F-150. It was in the upper right hand corner. After removing plastic cover over radiators access was easy. Replaced sensor which worked perfectly after that.
Luis Mallen
2025-02-26 14:36:06
A veces tarda en ajustar la temperatura real. Esta a 40 y muestra 28, y poco a poco empieza a mostrar la temperatura real. Especialmente en frÃo, no se si se congele, amanece a 0 y aunque a medio dÃa sube la temperatura sigue marcando 0, quizá 1
shamski77
2025-02-08 15:48:23
Not a lot of fun to install, but the sensor functions as the original and installation mounting was the same.No issues at all, and my exterior temperature no longer shows -40 when it is +10 outside.Crossing fingers that it last to end of life for my Explorer.
Jeffrey K.
2024-11-23 18:08:36
Purchased to rectify incorrect ambient air temperature on my 2009 Ford Escape. Working fine so far, about 2 months now.
Recommended Products
