Your cart is empty.
Your cart is empty.Product Description
Fuel Pump Lock Ring Remove Tool
compatible with Toyota and Lexus.
- Compatible with Lexus GS 300 (2006); GS 350 (2007-2011); GS 430 (2006-2007); GS 460 (2007-2011);
- Compatible with Lexus GX 460 (2010-2013); GX 460 Premium (2014-2020); GX 460 Base (2014-2021); GX 460 Luxury (2018-2021);
- Compatible with Lexus GX 470 (2003-2009); GX 470 Gold (2004);
- Compatible with Lexus LX 570 5.7L (2008-2021);
- Compatible with Lexus RX 330 3.3L (2004-2006); RX 350 3.5L (2007-2021);
- Compatible with Lexus RX 450h (2013);
- Compatible with Toyota 4Runner 4.7L V8 4WD (2003-2009); 4Runner 4.0L V6 4WD (2004-2021); 4Runner 4.7L V8 2WD (2008-2009);
- Compatible with Toyota 4Runner 2.7L (2010); 4Runner 4.0L V6 2WD (2016-2018);
- Compatible with Toyota Corolla 1.8L AT, (2003-2016 excep 2004);
- Compatible with Toyota Corolla 1.8L MT, (2003-2016 excep 2004);
- Compatible with Toyota Corolla 2.4L AT, MT (2009-2010);
- Compatible with Toyota Corolla 1.8L CVT (2014-2019);
- Compatible with Toyota FJ Cruiser 4.0L V6 2WD (2007-2011); FJ Cruiser 4.0L V6 4WD (2007-2013);
- Compatible with Toyota Highlander 2.7L, 3.5L (2010-2019);
Perfect Fit
lock ring wrench have 9 slot, could tight stuck lock ring, has better grip than other tools that can slip off, it good pulls fuel pump rings or get the ring loose.
Easy To Use
1/2" drive ratchet or breaker bar will help you easy to remove the lock ring, but can't use impact tool.
Strong and Durable
lock ring remove tool made of high quality steel, not easy break and rust.
Shena
2025-08-28 17:43:07
Worked awesome for the plastic lock ring on my 2011 scion TC. Very easy to remove fuel pump assembly with this tool. Definitely worth the money to do it the right way and not worry about breaking the fins off with a hammer and chisel. Would recommend for sure!
W. S. Stinefelt
2025-08-25 21:31:29
If you are replacing a fuel pump on a 2010 Corolla, get this tool. I first tried a three prong remover, but it broke some of the plastic tabs on the fuel pump retainer ring. This tool has 9 contact points and worked like a charm. I applied a lot of force (with a 3 foot breaker bar) to loosen the retainer ring and break it loose. I’m glad I bought it and I recommend it.
sam
2025-07-31 12:06:56
Product works great. Welds on the tool aren’t phenomenal, but they get the job done with a breaker bar.Couple tips. The tool doesn’t lock in, 360 degrees around the locking washer.There’s only 2 or 3 places where it’ll fully seat. You want to make sure it 100% slides into all of the grooves or it’ll slip. Once you get the tool seated, take the breaker bar and point it up, so you can tap the tool down into the lock washer a few times. Theres more than likely dirt and build up around the lip of the fuel tank. Do this a few times, and vacuum well around the tank before opening.I made some marks on the washer so I knew exactly where it needed to be tightened back to when re installing. Worked great!
G. B.
2025-07-12 11:49:26
This tool fitted like a glove onto a Corolla 2007’s fuel pump assembly. Took 15 seconds to remove and another 15 seconds to re-install. No banging and no breaking. Worth every single pennies.
Scott
2025-05-27 21:46:37
Well made, made easy work of fj cruiser fuel pump.
Alvin l. Abston
2025-05-07 10:12:52
Works great with minimum effort
Customer
2025-05-04 17:51:28
It's a perfect fit. Don't waste your money on the "universal" lock ring tools. A lot of people mentioned using cheater pipes or impacts but using a SHORT extension and socket worked well for me. 2009 Corolla
Ian D.
2025-04-24 14:11:51
The tool arrived in good condition. It worked perfectly for my 2008 Toyota Matrix fuel tank lid even after I broke some of the plastic edges off when I tried with a hammer and screwdriver.
good
2025-03-20 17:39:04
Without this and an impact wrench it is impossible to remove the ring!
Mr.Piments
2025-03-08 09:37:05
Tried other U shape ajustable tools and ended up just braking the plastic fin’s but with this tool and a long breaker bar i was able to get the ring off !! What helps is that there is multiple contact points and it sit low on the ring. Had to be two person doing that job , one holding the tool firmly in place and the other working the breaker bar. Looks easy but believe me you will be happy you bought this instead of other ajustable U shape tool.
ravinder singh
2025-01-24 15:23:05
Works good. Got the pump out first try.
zozapan
2025-01-16 15:50:31
Pretty affordable at $36.75 CAD. I will update if it fail’s.
Trent Hawkes
2025-01-07 13:30:24
Perfect fit and very strong
Recommended Products