Your cart is empty.
Your cart is empty.Tap Information: Drill America DWT Series hand threading tap is the most versatile taps for hand use, or for tapping under power. Hand threading tap is popular for use in general machine tapping or CNC tapping. This is also appropriate for tapping the vast majority of materials in through or blind holed conditions. Taper style: starts the thread square with the work piece. Plug style: generally used in thru holes. Bottom style: generate the thread to the bottom of the hole. Set: Contains taper, plug and bottom taps. . Drill bit information: Drill America dwdn Series high speed drill bit is a dependable, general purpose drill designed to perform in a broad range of materials in the iron and steel families. Ideal for production, maintenance or portable drilling jobs. Surface treated with abrasion-resistant black oxide. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that Act to hold coolant near the cutting edge. Round shanks allow use with a wide variety of tool holding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
Ted ADD Acres
2025-08-25 15:47:01
Had broken battery post on golf cart, used this and a threaded insert to repair. Bit worked great, just have to drill slow in lead and clean the filings out as you go. Tap worked well, again went slow and cleaned as I went. Cart is now going again.
AMB
2025-08-24 11:59:13
Broken screw in an HO locomotive frame.This tool worked to drill new hole and tap a 2-56 hole. Used some Labelle 102 lubricant while tapping the hole.Worked flawlessly.
Keith W.
2025-08-19 09:49:28
Good quality tap and HSS drill bit
T
2025-08-05 11:26:26
When I received my package the tap was broken. Contacted Amazon and they made it right. Second tap and bit work great.
Anonymous Bosch
2025-08-04 09:07:40
This is the first hole I've ever tapped. To say I'm a novice would be an understatement. But I bought the cheapest M6 tap/5mm drill combo on Amazon and threw caution to the wind. I drilled 2 holes in standard 1" wide bar steel from Lowes and then tapped them for an M6 bolt. The drill bit made short work of the drilling. It cut without much pressure and easily ate through the steel. I added a couple drops of oil for cutting fluid just to be on the safe side. I then put the tap in the handle, added more oil to the bit/hole and proceeded to cut threads in the hole. 1/2 turn forward, 1/4 turn back. The tap bit easily and I was left with 2 perfectly tapped holes in my project. My skill isn't what got the job done here, it was the tool. I don't know how this will hold up through the years but for this project, the price was right and the result was perfect.
Goggles
2025-07-17 17:30:54
This was my first time creating threads in ANYTHING. A buddy of mine had a tap and die set and of course the size I needed was damaged AND I didn’t have an exact drill bit for the hole size. So I ordered this here and took my time drilling straight and creating the new threads and it worked out PERFECTLY.Thank you for having one of the few sets that comes with both to create the hole AND to tap it.
Longhorn
2025-06-21 15:09:04
How these taps have above 3 stars is beyond me. I work as a quality manager in a machine shop. Was in a pinch for some homemade parts that needed tapping so ordered this real quick to try out. The tap flexes so much when tapping the first hole that I was almost positive it was going to break just from how much it was twisting at the top near my tapping handle compared to the bottom as the cutting threads started to engage the hole. I stopped tapping at that point and decided to borrow a proper tap from work. I then continue to use this tap to start the threads and then used my tap from work to finish the threads. Needless to say on the third hole out of eight this tap broke only being two or three threads in...not too hard to get out but if I would have tried to cut more on the first hole it would have surely been a scrap part... Or maybe not since a standard drill bit is probably going to be harder than this tap... Even if the drill bit was from China it would probably still be tougher than this tap.
Matthew Buckley
2025-05-17 10:29:35
I've only used this on aluminum, but cuts nice threads
Steven scrivener
2025-04-24 11:23:21
Good lasting
Al Howard
2025-04-23 16:22:00
Only had one broken bolt to drill out and tap and this set worked perfectly. Seems like good quality steel, I’ll buy this brand again if I need something.
Brent J.
2025-03-15 14:18:31
nice matched set, worked perfectly for my needs.
francois bergeron
2025-03-02 10:59:37
exellent
Customer
2025-02-16 17:10:48
Perfect - Highly recommended
Recommended Products
