Your cart is empty.
Your cart is empty.Product Description
Strong support hook ensures product safety
Drywall and our products are fixed together by a strong support hook, which avoids the danger of drywall sliding in the process of rising.
Unique anti-skid design
When using the drywall lift, you need to put down the rubber foot rear baffle at the bottom, make it fully contact with the ground, generate enough friction to ensure that the whole product will not move during the operation.
Maximum support 150 pounds
Our drywall lift supports the maximum load of 150 lbs. During the operation, we should pay attention to the weight of the lifted object, and remember not to exceed the maximum load to avoid accidents.
Controlling arm length by telescopic button
The arm length of the product can be adjusted by the telescopic knob to ensure that the product is suitable for drywall of various sizes.
Single-stage winch with handle and braking mechanism
The single-stage winch with handle and brake rod makes lifting drywall easier. By pressing down the brake rod, the product can be fixed to a certain height.
Universal Wheel with Brake Fixed
The Universal wheel with brake can fix drywall lift in a certain position in use, avoid the front and back shaking of the product, and it will be better to use with the rear baffle of rubber foot.
Our heavy-duty drywall lift can help you get your job done faster and easier, perfect for commercial or home use. It’s sure to do all the heavy and hard work for you.The drywall lift allows one person to lift a drywall panel that is up to 4*15.9 ft in size, without assistance.The panel can be raised to a maximum height of 11ft for attachment to level ceilings or (with the lift's cradle tilted) to sloped ceilings or side walls.For higher ceilings,an Extension Accessory is available that increases maximum lift to 15.4ft.The lift's cradle lowers to 34in.off the floor for easy panel loading,and can support up to 150lbs. It has 3 large casters that allow moving it over uneren floors.Hoist with tilting action allows 1 person to handle and apply drywall panels. Easy to assemble and disassemble,no tools required.
Features:
Sturdy welded steel construction with powder coating
4" Caster Wheels For Easy Rolling
Hoist tilting for ceilings and walls
Built-in winch with brake
Foot Stops To Keep The Lift In Place For Safety
Easy assembly and disassemble no tools required
Specifications:
Color: RED Product height: 6’ to 16’(From floor to top) Material: steel Foldable: Yes Brakes: Yes drywall lift Panel Lift Panel Hoist Jack Lifter Jack Rolling Caster drywall lift Panel Lift Panel Hoist Panel Lift Panel Hoist Jack Lifter Jack Rolling Caster
D H
2025-08-28 14:31:08
I used this to mount wood boards on the ceiling as well as acoustic panels which were installed with eye hooks into that wood. What would've taken like 3 people and a ton of extra time became a one man task and it was EASY. The lift worked perfectly and easily held up my 20-30lb ceiling panels. Has been reliable for use, and no issues whatsoever. It was also cheaper with this company than other ones. Also very easy to use and wasn't crazy to put together. I think it came in beat up packaging but the lift itself was unaffected. Would buy again.
srg9832
2025-08-21 18:30:25
Used it to lift 4' x 12' by 3/4" sheetrock onto the ceiling in a 970 square foot house. Did the job, groaned a little bit but then again so would I if I were lifting that kind of weight. I don't think it would like that for more than what we did and might be more dangerous if you had 10' ceilings. So keep the weight limits well within range. Use was a breeze, I've used these before though, so I knew what I was doing. A new DIY'er might struggle a bit with the instructions. Towards the end it did get a little wobbly but we were pushing its limits. We were using it to lift some sheets on an 8-foot ceiling. Keep a clean floor so it rolls well.When cranking up there was a sudden drop in the center pole that extends. We discovered that it's the cable slipping on the crank because we didn't have the crank out and aligned right so the cable was bunding up on one side of the crank handle. Keep your hand off the center column when cranking just in case and make sure your head is well below the bottom most point when cranking. Always keep an eye on your sheets. Helps to have a second person if you are lifting big sheets. But by all means on 4x8 sheets go for it alone. Anything bigger you may need someone to help guide it in place.
E. Green
2025-08-16 10:10:56
This thing really is impressive and great for the price, but I'd be really weary using it for anything more than 4ft x 8ft. It definitely starts to buckle a bit and isn't fully stable at holding larger pieces. On top of that, the heavier the pieces, the more likely the piece will crack and the thing cranks up as with each section of metal that cranks, the metal very loudly will shift into place.But hey for the $, ability to break down, and the ease of only relying the machine instead of other people, it really can't be beat.
Michael R.
2025-07-13 17:01:27
This is a very good basic lift. It took me less than five minutes to assemble. I used it to sheetrock a garage ceiling with 4x8 drywall sheets.Just make sure the bottom of the angle post seats all the way in the lower leg assembly. Use outriggers when lifting sheets. Position lift arms at an angle, place sheet on arms evenly, then turn sheet to horizontal-flat. Be sure to push lock tab at top of post. Then hold brake handle, pull crank and release brake. Don't let crank slip from your hand while cranking. Get very close to ceiling and set brake. Don't bump crank or brake handle or things may come crashing down on you. Now adjust position of sheet, then crank up further till tight against ceiling. Install screws into joists then lower the lift and repeat. Mine worked great. I probably would not rely on it for long term commercial service, but great for a remodel.
PAHunter
2025-06-24 13:31:01
A little squeaky and loose joints but does the job at a very reasonable price. Not commercial quality but, again, cheaper than a long term rental and I’ve put up over 200 sheets of drywall with mine.
SWMOR
2025-03-13 18:48:14
Son-in-law used this for hanging drywall with a friend. It was easy to assemble and great to use. They moved 60 sheets of drywall from 1st floor up to the second story and then moved the jack lift upstairs to hang the sheet rock.
T. Canterbury
2025-03-04 17:12:43
This has been a workhorse. We are DIY'ers & you cannot beat the quality for the price, no complaints. This is a great investment for anyone who has a lot of renovating to do.
doubletap
2025-02-11 13:27:18
This lift greatly increases the speed of installing drywall on ceilings and reduces fatigue. It also makes possible for one person to install a ceiling.
Recommended Products