Your cart is empty.
Your cart is empty.DS18 High Quality Accessories at the Most Affordable Price. DB1020 1X0GA In/2X0GA Out Power or Ground Distribution Block.
dama
2025-08-24 11:35:52
These things are great great quality you can go with 0 gauge on terminals by removing the ring for 4 gauge great quality again very happy
Toodles McDoodles
2025-08-10 17:03:25
The ports on this distribution block are true to size which is a relief because that gets lost in translation often. The block is actually covered with a clear plastic top that snaps in place with 4 tabs. The tabs aren't the easiest to work with and I actually had to use a thin screwdriver to pop it off while being careful not to break them. The clear plastic base is screwed to the distribution block and has 4 holes to screw it down. The screws to tighten down the cables have a beveled end with slight serrations on the edges which could be a good or bad thing. Those serrations are going to chew into your cable and actually give you a better connection especially if you have something like a 10,000 strand monster cable. The downside is that once you disconnect that cable, some of the strands will fall off and you'll need to chop a half inch off the cable to get 100% of the conductors back. If you're using a 110 strand 2 gauge starter cable like me, each strand is thicker and unlikely to be broken by those serrations. Starter cable is still acceptable to use for car audio because although it's not as flexible, it has enough flex to resist road vibrations when used in short spans. Overall this piece was a good fit, did it's job and looks nice.
phillip rice
2025-07-26 12:56:50
high quality product and very pleased with the price
Eduardo Ramirez
2025-07-19 17:30:35
Don’t even hesitate to purchase. Solid product and you know you’re gonna need one anyway. 1/0 in and dual 1/0 out. Bass on peeps!
John Lambert
2025-07-13 10:43:29
worked great in motorcycle application
Devin
2025-06-14 10:22:01
No complaints heavy duty
Carlos Elliott
2025-06-06 19:29:08
I like as it’s a really well built part
Carl
2025-06-03 18:13:19
I installed 2 of these in my car which has all 1/0 guage running thru-out entire vehicle. I have 3 Orion amps that require big power. I was able to split my power coming from my battery into 3. (1) 1/0 in, (1) 1/0 to my amp and (1) 1/0 to the rear for my other 2 amps plus my capacitor. And same scenario in the back of the car. I had NO problems at all getting my stripped wire into the fittings. Usually company's say 1/0 but it wont fit. These, no problem at all. And I've read some people complaining about the covers. If you know how to put them on correctly then you wont have any problems at all. Both my covers went on very easily and are on very well. Put one side in first then squeeze a little and the other side snaps right in. I love em. IMO
kamaron
2025-04-28 18:43:19
excelente calibre 0/1 sin problemas , buena calidad es duro y el precio muy accesible para hacer puentes tengo otro marca stinger pero este se siente con mas calidad , recomendado para tu sonido
Steve S
2025-01-24 10:16:29
This distribution block is very well built, and has a generous amount of internal space. I mention this because I am running Knukonceptz 1/0 awg in and 4 awg out power wire, and although it is the thickest 1/0 and 4 awg wire I've used, it fits easily without having to do the twist and push method. I would definitely recommend this block
leighton
2025-01-22 21:11:39
I used this distribution block on my trunk setup in my car. I had a 0ga wire from the battery to the truck, where the distribution block split to 2x4ga wires. one for my air compressors for air management/ compressors, the other for subwoofers.
Cliente de
2025-01-20 10:10:22
Bloque de distribución de buena calidad y precio
Gerry
2024-11-23 16:16:37
Used this distribution block to supply power to my engine and all electronic components in my car as the battery was moved to the trunk.Well built and solid construction.I recommend this product!
Recommended Products
